Research Publications in Journals


In International Journals  

  1. Corrosion of maraging steels in chloride solutions: P Bala Srinivasan, C Marikkannu, S Ramu and K Balakrishnan, British Corrosion Journal, 29, 2, (1994), p132

  2. Acceleration of ambient temperature phosphating by an electrochemical pulse technique: P Bala Srinivasan, S Sathiyanarayanan, C Marikkannu and K Balakrishnan, Surface and Coatings Technology, 64, 3, (1994), p161
  3. Evaluation of chromate films by electrochemical impedance spectroscopy: P Bala Srinivasan, C Marikkannu, S Sathiyanarayanan and K Balakrishnan, Transactions of the Institute of Metal Finishing, 73, 1, (1995), p34
  4. Non-chromate chemical conversion coatings for aluminium alloys: P Bala Srinivasan, S Sathiyanarayanan, C Marikkannu and K Balakrishnan Corrosion Prevention and Control, 42, 2, (1995), p35
  5. Corrosion behaviour of as-sintered P/M Al-SiC metal matrix composites: EP Rajiv, P Bala Srinivasan and K Balakrishnan, Bulletin of Electrochemistry, 13, 3, (1997), p107
  6. Optimisation of compound layer thickness for wear resistance of nitrocarburised H11 steels: N Krishnaraj, P Bala Srinivasan, KJL Iyer and S Sundaresan, Wear, 215, (1998), p123
  7. Modified Falex testing - A tool for understanding the compound layer capabilities: N Krishnaraj, P Bala Srinivasan, KJL Iyer and S Sundaresan, Journal of Materials Engineering and Performance, 7, 6, (1998), p796
  8. Microstructure-tensile strength correlation of salt bath nitrocarburised engineering steels: P Bala Srinivasan, N Krishnaraj and S Sundaresan, Steel Research, 72, 2, (2001), p52
  9. Tribological and corrosion behaviour of aluminium alloy-silicon carbide metal matrix composites: P Bala Srinivasan and EP Rajiv, Bulletin of Electrochemistry, 17, 5, (2001), p197
  10. Corrosion behaviour of Ti6Al4V and duplex stainless steel (UNS 31803) in synthetic bio-fluids: S Sathiyanarayanan, C Marikkannu, P Bala Srinivasan and V Muthupandi, Anti Corrosion Methods and Materials, 49, 1, (2002), p33
  11. Optimisation of flash welding parameters for wheel rim manufacture using continuously cast steels: N Krishnaraj and P Bala Srinivasan, Steel Research, 73, 4, (2002), p163
  12. Sliding wear behaviour of salt bath nitrocarburised medium carbon steel: P Bala Srinivasan, CV Krishnakumar and N Krishnaraj Journal of Materials Engineering, and Performance, 11, 5, (2002), p509
  13. Influence of nitrogen addition on the microstructure and mechanical properties of duplex stainless steel weld metals: V Muthupandi, P Bala Srinivasan S Sunderasan, Steel Research, 73, 9, (2002), p409
  14. Corrosion behaviour of salt bath nitrocarburised steels: P Bala Srinivasan, V Muthupandi, S Balaji, S Vasudevan and N Krishnaraj, Bulletin of Electrochemistry, 18, 10, (2002), p451
  15. Microstructure and mechanical properties of salt bath nitrocarburised thin section steels: P Bala Srinivasan, V Muthupandi, S Balaji, S Vasudevan and N Krishnaraj, Surface Engineering, 19, 2, (2003), p91
  16. Effect of chemical composition on phase balance and mechanical properties of duplex stainless steel (UNS 31803) weld metals: V Muthupandi, P Bala Srinivasan, SK Seshadri and S Sundaresan, Steel Grips - Journal of Steel and Related Materials, 1, 3, (2003), p224
  17. Investigation on the failure of a mounting bolt in an automobile air brake assembly: N Krishnaraj, P Bala Srinivasan and V Muthupandi, ASM Journal of Practical Failure Analysis, 3, 2, (2003), p59
  18. Corrosion behaviour of nitrogen added duplex stainless steel weld metal: V Muthupandi, P Bala Srinivasan, SK Seshadri and S Sundaresan, Corrosion Engineering, Science and Technology, 38, 4, (2003), p303
  19. Microstructural evolution and properties of dissimilar weld joints between carbon steel and duplex stainless steel: P Bala Srinivasan, V Muthupandi and V Sivan, Steel Grips - Journal of Steel and Related Materials, 1, 5, (2003), p380
  20. Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds: V Muthupandi, P Bala Srinivasan, SK Seshadri and S Sundaresan, Materials Science and Engineering, A358, October 15, (2003), p9
  21. Effect of nitrogen addition on the formation of secondary austenite in duplex stainless steel weld metals and resultant properties: V Muthupandi, P Bala Srinivasan, SK Seshadri and S Sundaresan, Science and Technology of Welding and Joining, 9, 1, (2004), p47
  22. Environmental cracking behaviour of submerged arc welded super martensitic stainless steel weldments: P Bala Srinivasan, SW Sharkawy and W Dietzel, Journal of Materials Engineering and Performance, 13, 2, (2004), p232
  23. Stress corrosion cracking behaviour of chromated AA2024-T351 alloy in chloride solution: P Bala Srinivasan, V Heitmann and W Dietzel, Corrosion Engineering Science and Technology, Accepted for publication, 39, 2, (2004), p174
  24. Hydrogen assisted stress-cracking behaviour of electron beam welded supermartensitic stainless steel weldments: P Bala Srinivasan, SW Sharkawy and W Dietzel, Materials Science and Engineering, A385, November 15, (2004), p6
  25. Stress corrosion cracking susceptibility of friction stir welded AA7075–AA6056 dissimilar joint: P Bala Srinivasan, W Dietzel, R Zettler, JF dos Santos and V Sivan, Materials Science and Engineering, A392, February 15, (2005), p292
  26. Effect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals: V Muthupandi, P Bala Srinivasan, V Shankar, SK Seshadri and S Sundaresan, Materials Letters, 59, 18, (2005), p2305
  27. An assessment of impact strength and corrosion behaviour of shielded metal arc welded dissimilar weldments between UNS 31803 and IS 2062 steels: P Bala Srinivasan, V Muthupandi, W Dietzel and V Sivan, Materials and Design, 27, 3, (2006), p182
  28. Stress cracking behaviour of dissimilar friction stir weldment in chloride solution: Dissolution assisted or hydrogen induced?: P Bala Srinivasan, W Dietzel, R Zettler, JF dos Santos and V Sivan, Corrosion Engineering, Science and Technology, 41, 1, (2006), p45
  29. Microstructure and corrosion behaviour of shielded metal arc welded dissimilar joints comprising duplex stainless steel and low alloy steel: P Bala Srinivasan, V Muthupandi, W Dietzel and V Sivan, Journal of Materials Engineering and Performance, 15, (2006), p758
  30. Effect of inhibitors on the corrosion behaviour of a dissimilar aluminium alloy friction stir weldment: P Bala Srinivasan, W Dietzel, R Zettler, JF dos Santos and V Sivan, Corrosion Engineering Science and Technology, 42, 2, (2007), p161
  31. Fracture toughness of electron beam welded Ti6Al4V: K Prasad Rao, K Angamuthu, P Bala Srinivasan, Journal of Materials Processsing Technology, 199, 1-3, 2008, p185
  32. Corrosion behaviour of a thin section martensitic stainless steel GTA weldment in chloride solutions : MP Satish Kumar and P Bala Srinivasan, Materials Letters, In press
  33. Characterization of a thin section dissimilar weld joint comprising austenitic and ferritic stainless steels, P Bala Srinivasan and MP Satish Kumar, Materials Science and Technology, In press
  34. Characterization of microstructure and corrosion behaviour of thin section AISI 430 stainless steel gas tungsten arc weldment, MP Satish Kumar and P Bala Srinivasan, Corrosion Engineering Science and Technology, In press
  35. Stress corrosion cracking behaviour of a surface-modified magnesium alloy : P Bala Srinivasan, C Blawert, W Dietzel and KU Kainer, Scripta Materialia, In press
  36. Optimization of process parameters for deposition of Stellite on X45CrSi93 steel by plasma transferred arc technique : R Ravi Bharath, R Ramanathan, B Sundararajan and P Bala Srinivasan, Materials and Design, In press

 

In National Journals

  1. Salt bath treatments for ferrous substrates - Part I - Ferritic nitrocarburising- A process to combat wear and scuffing: P Bala Srinivasan and N Krishnaraj,Tool and Alloy Steels, 10, (1999), p3

  2. Effect of heat input on the microstructure and mechanical properties of super duplex stainless steel weld metals: P Bala Srinivasan, S Vasudevan, S Balaji, C Ravivarman, BVS Pavankumar and V Muthupandi, Indian Welding Journal, 4 (2002), p53