National Journals

  1. R.Narayanasamy, "Limiting Draw Ratios in deep drawing of sheet metals according to New Yield Criteria", Journal of Engineering Production, Vol.17, 1986 (12-16), India.
  2. R.Narayanasamy and R.Sowerby, "Formability of zinc sheet metal when drawing through a Tractrix die", Journal of Metals, Materials and Processes, 1998, vol.10, No.2., pp. 177-182.
  3. R.Narayanasamy and K.S.Pandey, "Densification in Al- Alumina composite during upset forming operation", Journal of Metals, Materials and processes, accepted for publication, 2003.
  4. R.Narayanasamy and S.Sathiyanarayanan, "Phenomenon of barreling in Zinc solid cylinders during cold upset forming", Journal of Engineering and Material Science, Vol.6, 1999, pp. 22-26.
  5. R.Narayanasamy and S.Sathiyanarayanan, "Phenomenon of barrelling in copper solid cylinders during cold upset forming", Journal of Metals, Materials and processes, 1998, Vol.10, No.2, pp. 183-188.
  6. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "The effect of Process parameters on theoretical drawing ratio for cup drawing process", accepted to the Journal of Engineering Materials, CISH, New Delhi, 2003.
  7. R.Narayanasamy and K.Duraiselvam, "A knowledge based system for process sequence design in deep drawing operation", accepted for the Journal of Metals, Materials and processes, 2003.
  8. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Effect of the coefficient of friction on limiting draw ratio during cup drawing process", submitted to the Journal of Institution of Engineers, India, 2001.
  9. R.Narayanasamy and S.Raghuraman, "Some aspects on barrelling in Al solid cylinders during cold upset forging with no lubricants using die with constraints", accepted for publication in Metals, Materials and processes, 2003.
  10. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Effect of Coefficient of Friction on limiting Draw ratio during cup drawing process", accepted for the Institution of Engineers, India, 2003.
  11. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Effect of Process parameters on LDR", accepted for Journal of Engineering and Material Science, CSIR, New Delhi, 2003.
  12. R.Narayanasamy and S.Malayappan, "An experimental analysis of upset forging of copper cylindrical billets considering the dissimilar frictional conditions at flat die surfaces", Journal of Metals, Materials and processes, Vol.14, No.4, 2002.
  13. N.Selvakumar and R.Narayanasamy, "Cold upsetting behaviour of sintered Aluminium preforms", Journal of Metals, Materials and processes, Vol.14, No.4, 2002.
  14. N.Selvakumar and R.Narayanasamy, "Deformation behaviour of Cold upset forged Aluminium Iron Cylinders", Trans. of Indian Institute of Metals, Vol.5(3), June 2005.
  15. N.Selvakumar and R.Narayanasamy, "Work hardening behaviour of sintered Aluminium preforms during cold axial compression", Journal of Metal-s Materials and Processes, Vol.No3, pp.197-206, 2002.
  16. R.Narayanasamy and S.Malayappan, "A study of barrelling during cold upsetting of Aluminium solid cylinders using a die with constraints", Journal of Metals, Material-s and Processes, Vol.13, pp. 61-70, 2001.
  17. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Effect of strain rate sensitivity of theoretical limiting draw ratio for cup drawing process", Journal of Metals, Materials and Processes, Vol.13, p. 2001.
  18. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Theoretical prediction of limiting draw ratio for cup drawing process", Journal of Metals, Materials and Processes, Vol.12, pp.337-350, 2000.
  19. A.Syed Abu Thaheer, R.Narayanasamy and K.Ganesh Babu, "Some aspects of barrelling in unlubricated copper solids of truncated cone billets during cold upset forging", Journal of Metals, Materials and Processes, in print.
  20. A.Syed Abu Thaheer, R.Narayanasamy and K.S.Pandey, "Barrelling in unlubricated Aluminium solid-s of truncated cone billets during cold upset forging", Trans. of Indian Institute of Metals, in print.
  21. N.Selvakumar, R.Narayanasamy and D.Rajesh, "Features of sintered aluminium preforms in cold upset forming using graphite lubricant", in print, Metals, Materials and Processes, 2003.
  22. N.Selvakumar, R.Narayanasamy and P.GaneshaPandian, "Experimental investigation of work hardening behaviour of sintered preforms by using different lubricants", in print, Metals, Materials and Processes, 2003.
  23. N.Selvakumar and R.Narayanasamy, "Experimental investigation of strain hardening behaviour of sintered aluminium preforms", Trans. of Indian Institute of Metals, Vol.58(3), June 2003.
  24. S.Malayappan and R.Narayanasamy, "An experimental analysis of upset forging of copper cylindrical billets considering the dissimilar frictional at flat die surfaces", in print, Metals, Materials and Processes, 2003.
  25. R.Narayanasamy, M.N.Rao and K.S.Pandey, "Mathematical treatment of barrelling in porous solid cylinders under axial compression", Transaction of Powder Metallurgy Association of India, Vol.20, 1993, pp.33-39.
  26. A.J.R.Inigoraj, R.Narayanasamy and K.S.Pandey, "Densification in aluminium-alumina composite sintered preforms during cold deformation", Journal of Metals, Materials and Processes, Vol.10, 1998, pp.167-176.
  27. N.Selvakumar, R.Narayanasamy and D.Rajesh, "Cold upsetting behaviour of sintered Aluminium preforms", Journal of Metals, Materials and Processes, Vol.14, No.4, Dec.2002 , pp.277- 284.
  28. S.Malayappan and R.Narayanasamy, "An experimental analysis of upset forging of copper cylindrical billets considering the dissimilar frictional conditions at flat die surfaces", Journal of Metals Materials and Processes, Vol.14, No.4, Dec.2002, pp.285-294.
  29. A.Syed Abu Thaheer, R.Narayanasamy and K.Ganesh Babu, "Some aspects of barrelling in unlubricated Copper solids of truncated cone billets during cold upset forging", Metals Materials and Processes, Vol.14, NO.4, Dec.2002. pp.295- 304.
  30. N.Selvakumar, R.Narayanasamy and P.RamKumar, "Work hardening behaviour of sintered Aluminium preforms during cold axial compression", Metals Materials and Processes, Vol.14, No.3, Dec.2002, pp.197-206.
  31. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Phenomenon of Instantaneous strain hardening behaviour of sintered Al Fe composite preforms during cold axial forming", Communicated to Indian Journal of Engg. and Material Science, 2004.
  32. R.Narayanasamy and C.SathiyaNarayanan, "Forming Limit Diagram for Interstitial Free steels supplied by TISCO Part-I", Communicated to Indian Journal of Engg. and Material Science, 2004.
  33. R.Narayanasamy and C.SathiyaNarayanan, "Forming Limit Diagram for Interstitial Free steels supplied by TISCO Part-II", Communicated to Indian Journal of Engg. and Material Science, 2004.
  34. R.Narayanasamy and R.Ponalagusamy, "A generalized mathematical theory of plasticity for compressible powder metallurgy materials", Communicated to Indian Journal of Engg. and Material Science, 2004.
  35. R.Narayanasamy and K.Manisekar, "Barrelling in square billets of aluminium during cold upset forging with different lubricants", Communicated to Indian Journal of Engg. and Material Science, 2004.
  36. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Workability studies on cold upsetting of sintered copper - Titanium carbide composite materials", Journal of Metals Materials and Processes, Vol. 17, No. 2, 2005, pp. 87-90.
  37. R.Narayanasamy and C.SathiyaNarayanan, "Formability of HSLA and EDDQ Steels of tube products of India", Indian Journal of Engg. and Material Sciences, Vol.12, April 2005, pp 141-150.
  38. R.Narayanasamy and C. Loaganathan, " Wrinkling behaviour of different grades of annealed commercially pure aluminium sheets when drawing through two different dies," Communicated to indian journal of engineering and material sciences, 2005,
  39. K. Manisekar and R. Narayanasamy, " Some aspects on barrelling in solid billets of non-circular aluminium during cold upset forging with different lubricants", Indian Journal of Engineering and Materials Sciences, Vol. 12, February 2005, pp. 24-32.
  40. N. Selvakumar and R.Narayanasamy, " Deformation behaviour of cold upset forged aluminium-iron cylinders", Trans. Indian Inst. Metals, Vol. 58, No. 1, February 2005, pp.19-28.
  41. K. Manisekar and R. Narayanasamy, " Barrelling in square billets of aluminium during cold upset forging under dissimilar friction", Trans. Indian Inst. Metals, Vol. 57, No. 2, April 2004, pp. 141-147.
  42. N. Selvakumar and R. Narayanasamy, " Experimental investigation of strain hardening behaviour of sintered aluminium preforms", Trans. Indian Inst. Metals, Vol. 58, No. 3, June 2005, pp.1-7.