Number of PhDs guided
|
Name of the PhD Scholar |
Title of PhD Thesis |
Role(Supervisor/ Co-Supervisor) |
Year of Award |
|
P. Dinesh Babu |
Experimental Studies and Numerical Simulation of Laser Transformation Hardening of Low Alloy Steel
|
Guide |
2013 |
|
T. Suthakar |
Experimental Investigation and Numerical Analysis of Laser Beam Welding of Austenitic Stainless Steel |
Co-guide |
2013 |
|
Nanda Naik Korra |
Optimization and Characterization Studies on Activated Tungsten Inert Gas (A-TIG) Welded Duplex Stainless Steel 2205 and Super Duplex Stainless Steel 2507 Alloys |
Guide |
2016 |
|
K. C. Ganesh |
Numerical Modelling and Experimental investigation on TIG and Activated TIG Welding of Austenitic Stainless Steel |
Guide |
2016 |
|
R. Ajith Krishnan. |
Experimental Investigation on the Effect of Gravitational Orientation on Flow Boiling Performance in Different Configurations of Micro/mini Channels |
Guide |
2019 |
|
K. Premkumar |
Experimental Investigation on Oxidation, Erosion and Hot Corrosion Behaviour of HVOF Coating |
Guide |
2020 |
|
G. Sankar |
Numerical and experimental investigations of the performance of tangentially fired utility boiler furnace firing high ash Indian coal |
Guide |
2020 |
|
M. Senthil kumar |
Experimental Investigation on Thermal Management of Phase Change Material based Solar Photovoltaic Passive Cooling |
Guide |
2021 |
|
R. Shankar |
Studies On The Development Of Nanostructured Thermal Spray Coating For High Temperature Applications |
Guide |
2022 |
|
Jinshah B S |
Performance investigation of an natural circulation loop based dual mode parabolic through collector for low temperature and saturated steam applications |
Thesis Submitted |
2022 |
M.S. Guidance
|
Sl. No |
Thesis Title |
Name |
Year of Award |
As Guide/co-guide |
|
|
Investigations On Prediction Of Local Heat Flux On Membrane Water-Wall Tubes Of Sub-Critical Boiler |
G. Sankar |
2016 |
Guide |
|
2.
|
Studies on performance of utility boiler with variation in ash content of coal |
Harikrishnan S. Pillai
|
2016
|
Guide
|
| 3. | An experimental Study on the Thermal Management of Concentrated Photovoltaic Cell using Passive Techniques | Anand S | 2019 | Guide |
|
4. |
Behaviour Based Safety Approach to Improve Workplace Safety”–A comparative study of Heavy Manufacturing Industry and Multi-storey Building Construction |
D. Dinagaran |
2020 |
Guide |
|
5. |
Postural Discomfort Analysis among EOT Crane Operators and Tube Edge Preparation Workers of Heavy Engineering Industry |
R Anandakumar |
2020 |
Guide |
PG DISSERTATIONS
|
Title |
Student name |
Year |
|
Ergonomic assessment in the heavy equipment manufacturing industry to reduce musculoskeletal disorders |
Deepmala kumari |
2021 |
|
Treatment of wastewater containing phenol by liquid-liquid extraction |
Deepmala kumari |
2021 |
|
Machine learning approach to predict thermophysical properties of nanoencapsulated PCM |
Vipul Atmaram Dhotre |
2021 |
|
Synthesis and comparative study of SiO2 and TiO2 shell based nanoencapsulation of binary eutectic PCM |
Vipul Atmaram Dhotre |
2021 |
|
Kinetic performance of bio-char based form-stable PCM for medium temperature range applications |
Jatoth Mahesh |
2021 |
|
Synthesis and Characterization of Form stable Bio-based composite PCM material |
Jatoth Mahesh |
2021 |
|
Numerical investigation of melting behavior of phase change material dispersed with nano-particles in Concentric pipes |
Akula Sai Sankar |
2020 |
|
Characterization of a novel composite PCM for building applications |
Akula Sai Sankar |
2020 |
|
Numerical investigation of hypersonic flow passed different after body configuration |
Bhukya Koteswararao Naik |
2020 |
|
Dynamically simplified temperature Transforming model for low temperature composite PCM slab |
Bhukya Koteswararao Naik |
2020 |
|
Experimental analysis of insole material in safety shoe and the effect of different insole material in the ground reaction force during material handling |
Anuradha Mishra |
2019 |
|
Prediction of incident energy released during ARC flash in industries using MATLAB |
Anuradha Mishra |
2019 |
|
Identification of biomechanical risk factors followed by postural analysis among construction workers |
C NIKITHA |
2019 |
|
Characterisation and thermal stability analysis of novel form stable composite PCM for solar photovoltaic applications |
Sahith G |
2019 |
|
Ergonomic study, analysis and process improvement of manual handling workers on LPG gas cylinder |
Mukilvanan M |
2019 |
|
Dynamic Analysis of Flat Plate Loop Heat Pipe (Phase-I Development of Non-Isothermal Incompressible Two-Phase Solver) |
Saurabh Prajapati |
2018 |
|
Hand-arm vibration transmission analysis of angle grinder using accelerometer |
Jivesh Kumar |
2018 |
|
Experimental analysis of PCM Integrated –Circular Natural Circulation Loop |
Abin francis |
2018 |
|
PCM Integrated - Solar Thermal Collector for Direct Steam Generation (Phase-I Development of Solver for Solid-to-Solid PCM) |
Abin francis |
2018 |
|
Evaluation Of the Effect of Floor Mats and Shoe In-Soles on Standing Posture |
Pankaj Panwar |
2017 |
|
Analysis Of Force on The Hands of Workers While Operating Hand Drilling Machine |
Pankaj Panwar |
2017 |
|
Study On Effect of Variation in Welding Position During Overhead Welding |
Bibhor Kumar Vibhuti |
2017 |
|
Incident Data Analysis and Risk Assessment in A Casting Industry |
Nishtu. A. P |
2017 |
|
Investigations On Prediction of Local Heat Flux on Membrane Water Wall Tubes of Sub-Critical Boiler |
Sankar G
|
2016 |
|
Computer Monitoring Safety System Assessment For Generator Rotor Cooling System |
Mondi Dheeraj Kumar |
2016 |
|
Studies On the Performance of Utility Boiler with Variation in Ash Content of Coal |
Harikrishnan S Pillai |
2016 |
|
Investigation Of Work-Related Disorders and Ergonomics Design of Seat in Forklifts |
Karanam Venkiteshvarlu |
2016 |
|
Fatigue Evaluation in Manual Handling Using Surface Emg and Ergonomic Design consideration Of Trolley |
Singamsetty Vamshi Krishna
|
2016 |
|
Comparison Of Oil Fire Suppression Using Water Mist Ultrasonic Vibrator and Twin Fluid System |
M Harihara Sudhan |
2016 |
|
Design And Development of The Handle For Vibrating Plate Compactor for Mitigating Hand-Arm Vibration |
N. Sivasankara Naik
|
2015 |
|
Oxidation Behaviour on T22 Steel Using High Velocity Oxy Fuel Coating |
Ashu Kumar |
2015 |
|
A Mathematical Approach for Determining Fatigue Of Muscle Group Using Fatigue Model by Emg And Its Validation |
Sangamshetty Vamshi Krishna |
2015 |
|
Experimental Study of Suppressing Oil Fires Using Water Mist Ultrasonic Vibrator and Optimizing Fire Extinguishing Parameters |
M. Harihara Sudhan |
2015 |
|
Economic Assessment and Recommendations for Design of Mobile Crane Cabin |
Mondi Dheeraj Kumar |
2015 |
|
Analysis Of Hand Transmitted Vibrations During Soil Compaction with Vibrating Plate Compactor |
N Sivasankara Naik |
2014 |
|
Computational Fluid Dynamic Analysis of Tig Welding of 304 L Stainless Steel Molten Pool |
Ashu Kumar |
2014 |
|
Design And Implementation of Automatic Nitrogen Fire Suppression System in Electrical Enclosures |
Jiss Mathew |
2014 |
|
Excremental Investigations and Mathematical Modelling of Seated Occupants Exposed to Vertical Vibrations in Midi Bus |
Seenath K T |
2014 |
|
Numerical Investigation of Three-Dimensional, Transient Heat Transfer and Fluid Flow Weld Pool During Tig Welding of 3041 Stainless Steel |
Rohith Thomas |
2014 |
UG PROJECTS
|
Title |
Year |
|
Numerical investigation of immersed jet cooling for thermal management of Li-ion battery |
2021 |
|
Developing a PCM based thermal management system for Li-ion battery packs |
2021 |
|
Numerical investigation of PCM based baffle structured heat sink for thermal management of electronic components |
2020 |
|
Thermal stress analysis of parabolic trough receiver with concentrated solar radiation |
2019 |
|
CFD analysis of vortex induced vibration of absorber tube in solar trough collector |
2019 |
|
Electromagnetic Reciprocating Engine |
2017 |
|
Study of Erosion Behaviour of HVOF Coated Carbon Steel |
2017 |
|
A Theoretical Study of Flow Boiling In Straight And Tapered Microchannels And Micro gaps |
2017 |
|
Hydraulic Solar Tracker |
2016 |
|
Comparative Study of Mars Rover Suspension |
2016 |
|
Vibration Of Non-Uniform Continues Railway Bridge Under Moving Load |
2016 |
|
Design of a Conveyor System For Loading And Unloading |
2015 |
|
Oxidation Resistance of HVOF Ni-Cr-Tio2 Coating on Alloy Steel (T22) At 900c |
2015 |
|
Study of Storing and Packaging Processes of Agricultural Product in India |
2015 |
|
Design and Fabrication of A Parallel Manipulator and Optimization of Its Path Planning |
2015 |
|
CFD Analysis of Heat Transfer and Fluid Flow In Weld Pool During Tig Welding Of 304L Stainless Steel |
2014 |
|
Effect of Ethanol Gasoline Blend in 4 Stroke Spark Ignition Engine |
2013 |
|
A-Tig Welding of 304 L Using Single Component Flux |
2013 |
|
Simulation and Analysis of Fluid Flow During the Laser Beam Welding of Aisi 304 Stainless Steel |
2010 |
|
Analysis Of Heat Transfer Characteristics of Active and Passive Heat Sinks Used in Integrated Circuits |
2009 |
|
Effect Of Preheated Waste Cooking Oil on the Performance and Emissions in Di Diesel Engine |
2009 |
