Journals

Refereed Research Journals

Author(s) Title of Paper Journal Volume (No.) Page numbers Year Impact Factor of the Journal (Optional)
Vellaisamy Balasubramaniam, Durairaj Rajkumar, Poovaraj Ranjithkumar, Chinnaiyan Sathiya Narayanan Comparative study of mechanical technologies over laser technology for drilling carbon fiber reinforced polymer materials Indian Journal of Engineering and Materials Sciences (IJEMS) 27(1) 19-32 2021  
Ramkumar, K., N. Baskar, K. Elangovan, C. Sathiya Narayanan, K. A. Selvarajan, and C. P. Jesuthanam Comparison of multi point incremental forming tool with single point incremental forming tool using FLD, fractography and 3D-surface roughness analysis on Cr/Mn/Ni/Si based stainless steel Silicon 13(2) 487-494 2021  
G Yoganjaneyulu, C Sathiya Narayanan Application of Entropy—Deng’s Similarity Approach for Optimization of Single-Point Incremental Forming Process Parameters of Titanium Grade 2 Sheets Advances in Industrial Automation and Smart Manufacturing-Springer, Singapore   297-312 2021  
PN Siddharth, C Sathiya Narayanan A review on Electron Beam Welding process Journal of Physics: Conference Series 1706(1) 12208 2020  
G Yoganjaneyulu, Natarajan Manikandan, C Sathiya Narayanan Investigations on multi-sheets single point incremental forming of commercial pure titanium alloys Materials and Manufacturing Processes 35(9) 1002-1009 2020  
K Ramkumar, N Baskar, K Elangovan, C Sathiya Narayanan, KA Selvarajan, CP Jesuthanam Comparison of Multi Point Incremental Forming Tool with Single Point Incremental Forming Tool Using FLD, Fractography and 3D-Surface Roughness Analysis on Cr/Mn/Ni/Si Based Stainless Steel Silicon   1-8 2020  
C Chinthanai Selvan, C Sathiya Narayanan, B Ravisankar, R Narayanasamy, C Thillaiyadi Valliammai The dependence of the strain path on the microstructure, texture and mechanical properties of cryogenic rolled Al-Cu alloy Materials Research Express 7(3) 36525 2020  
K Tejonadha Babu, S Muthukumaran, C Sathiya Narayanan, CH Bharat Kumar Analysis And Characterization Of Forming Behavior On Dissimilar Joints Of Aa5052-O To Aa6061-T6 Using Underwater Friction Stir Welding Surface Review and Letters 27(3) 1950121 2020  
G Yoganjaneyulu, VV Ravikumar, C Sathiya Narayanan Investigations on strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming Anti-Corrosion Methods and Materials     2020  
G Vignesh, C Pandivelan, CS Narayanan Review on multi-stage incremental forming process to form vertical walled cup Materials Today: Proceedings 27 2297-2302 2020  
G Vignesh, C Pandivelan, CS Narayanan Study on formability and dislocation density in forming of hemispherical cup Materials Today: Proceedings 27 2005-2010 2020  
G Vignesh, CS Narayanan, C Pandivelan, K Shanmugapriya, BN Tejavath, L Tirupathi Forming, fracture and corrosion behaviour of stainless steel 202 sheet formed by single point incremental forming process Materials Research Express 6 (12) 126540 2019  
G Yoganjaneyulu, KA Babu, S Vigneshwaran, CS Narayanan Microstructure and mechanical properties of cryorolled Al–6Zn–3Mg–2Cu–0.5 Sc alloy Materials Letters 255 126606 2019  
G Yoganjaneyulu, CS Narayanan A Comparison of Fracture Limit Analysis on Titanium Grade 2 and Titanium Grade 4 Sheets During Single Point Incremental Forming Journal of Failure Analysis and Prevention 19 (5) 1286-1296 2019  
S Kumar, S Dhanabalan, CS Narayanan Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method International Journal of Decision Support System Technology (IJDSST) 11 (4) 96-115 2019  
CC Selvan, CS Narayanan, S Vigneshwaran, R Narayanasamy, P Susila The microstructure transformations and deformation behavior of Al-4Mg-0.2 Zr alloy rolled at ambient and cryogenic temperatures Materials Research Express 6 (10) 1065a5 2019  
G Yoganjaneyulu, VV Ravikumar, CS Narayanan Investigations on strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming Anti-Corrosion Methods and Materials     2019  
G Yoganjaneyulu, Y Phaneendra, VV Ravikumar, CS Narayanan Investigations on the void coalescence and corrosion behaviour of titanium grade 4 sheets during single point incremental forming process Anti-Corrosion Methods and Materials     2019  
G Yoganjaneyulu, KA Babu, GV Siva, S Vigneshwaran, CS Narayanan Microstructure and mechanical properties of Al–6 Zn–3 Mg–2 Cu–0.5 Sc alloy Materials Letters     2019  
S Kumar, S Dhanabalan, CS Narayanan Application of ANFIS and GRA for multi-objective optimization of optimal wire-EDM parameters while machining Ti–6Al–4V alloy SN Applied Sciences 1 (4) 298 2019  
S Dhanabalan, K Sivakumar, CS Narayanan Form tolerances investigation in EDM process for super alloys using multiple holes electrodes NISCAIR-CSIR     2019  
KT Babu, S Muthukumaran, CH Kumar, CS Narayanan Improvement in Mechanical and Metallurgical Properties of Friction Stir Welded 6061-T6 Aluminum Alloys through Cryogenic Treatment In Materials Science Forum 969 490-495 2019  
KT Babu, S Muthukumaran, CH Kumar, CS Narayanan A Study on Influence of Underwater Friction Stir Welding on Microstructural, Mechanical Properties and Formability in 5052-O Aluminium Alloys In Materials Science Forum 969 27-33 2019  
G Yoganjaneyulu, C Sathiya Narayanan, R Narayanasamy Investigation on the fracture behavior of titanium grade 2 sheets by using the single point incremental forming process Journal of Manufacturing Processes 35 197-204 2018  
K Ramkumar, G Paulraj, K Elangovan, C Sathiya Narayanan Forming Limit Diagram, Void Analysis, Strain Distribution and Surface Roughness for SS430 Sheets During Multipoint Incremental Forming Archives of Metallurgy and Materials 63 1709-1714 2018  
C Raju, Neelkamal Haloi, C Sathiya Narayanan Strain distribution and failure mode in single point incremental forming (SPIF) of multiple commercially pure aluminum sheets Journal of Manufacturing Processes 30 328-335 2017  
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Optimization of machining parameters on microdrilling of CFRP composites by Taguchi based desirability function analysis NISCAIR-CSIR, India     2017  
S Kannadasan, A Senthil Kumar, C Pandivelan, C Sathiya Narayanan Modelling the Forming Limit Diagram for Aluminium Alloy Sheets using ANN and ANFIS Appl. Math 11 1435-1442 2017  
D Raj Kumar, P Ranjith Kumar, C Sathiya Narayanan, G Sakthivel, S Karmegam Application of the Taguchi based Desirability Function Analysis to Improve a GFRP Micro-drilling Performance Asian Journal of Research in Social Sciences and Humanities 7 771-783 2017  
L Selvarajan, C Sathiya Narayanan, R Jeyapaul, M Manohar Optimization of EDM process parameters in machining Si3N4–TiN conductive ceramic composites to improve form and orientation tolerances Measurement 92 114-129 2016  
C Raju, C Sathiya Narayanan FLD and Fractography Analysis of Multiple Sheet Single Point Incremental Forming Transactions of the Indian Institute of Metals 69 1237-1243 2016  
L Selvarajan, C Sathiya Narayanan, R JeyaPaul Optimization of EDM Parameters on Machining Si3N4–TiN Composite for Improving Circularity, Cylindricity, and Perpendicularity Materials and Manufacturing Processes 31 405-412 2016  
V Balasubramaniam, N Baskar, Chinnaiyan Sathiya Narayanan Effect of process parameters on the electrical discharge machining of aluminum metal matrix composites through a response surface methodology approach Science and Engineering of Composite Materials 23 145-154 2016  
V Balasubramaniam, N Baskar, C Sathiya Narayanan Experimental Investigations on EDM Process for Optimum Cylindricity and SR through less Machining Time for Al6061/SiC Composites Asian Journal of Research in Social Sciences and Humanities 6 126-134 2016  
C Raju, C Sathiya Narayanan Application of a hybrid optimization technique in a multiple sheet single point incremental forming process Measurement 78 296-308 2016  
L Selvarajan, C Sathiya Narayanan, R Jeyapaul Optimization of EDM Hole Drilling Parameters in Machining of MoSi 2-SiC Intermetallic/Composites for Improving Geometrical Tolerances Journal of Advanced Manufacturing Systems 14 259-272 2015  
L Selvarajan, C Sathiya Narayanan, R Jeyapaul Optimization of process parameters to improve form and orientation tolerances in EDM of MoSi2-SiC composites Materials and Manufacturing Processes 30 954-960 2015  
S Dhanabalan, K Sivakumar, C SATHIYA Narayanan Experimental investigation on electrical discharge machining of titanium alloy using copper, brass and aluminum electrodes Journal of Engineering Science and Technology 10 72-80 2015  
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Analysis of form tolerances in electrical discharge machining process for Inconel 718 and 625 Materials and Manufacturing Processes 29 253-259 2014  
V Balasubramaniam, N Baskar, C Sathiya Narayanan Optimization of Electrical Discharge Machining Parameters Using Artificial Neural Network With Different Electrodes 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th     2014  
A Palanisamy, R Rekha, S Sivasankaran, C Sathiya Narayanan Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti–6Al–4V) Applied Mechanics and Materials 592 540-544 2014  
L Selvarajan, C Sathiya Narayanan, R Jeyapaul Multi-Objective Optimization on Electric Discharge Machining Using by Grey Relational Analysis Applied Mechanics and Materials 592 550-554 2014  
L Selvarajan, C Sathiya Narayanan, R Jeyapaul Optimization of Machining Characteristics in EDM of Si3N4-TiN Composites by Taguchi Grey Relational Analysis Applied Mechanics and Materials 592 600-604 2014  
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance NISCAIR-CSIR, India     2013  
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Optimization of Machining Parameters in EDM of Inconel 718 for Form Tolerance Using Grey Relational Analysis Corrosion Detection in ‘T’Bend Oil Pipelines Based on Fuzzy Implementation 17 1453 2012  
G Venkatachalam, S Narayanan, C Sathiya Narayanan Ductile Fracture Criteria Based Forming Limits of Pure Commercial Perforated Aluminium Sheets in the Negative Minor Strain Region European Journal of Scientific Research 77 411-416 2012  
G Venkatachalam, S Narayanan, S Patel Nilay, Prabhakar Nishant, C Sathiya Narayanan Influence of hole shape and pattern on the prediction of limiting strain for perforated commercial pure aluminium sheets Applied Mechanics and Materials 232 961-965 2012  
G Venkatachalam, S Narayanan, C SATHIYA NARAYANAN Influence of hole size, hole shape and hole pattern on spring-back effect in perforated sheet metals using FEM International Journal of Engineering Science and Technology (IJEST)     2012  
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Optimization of EDM process parameters with multiple performance characteristics for titanium grades European journal of scientific research 68 297-305 2012  
G Venkatachalam, S Narayanan, Narayanan C Sathiya Prediction of limiting strains for square pattern–square hole perforated commercial pure aluminium sheets Advanced Materials Research 548 382-386 2012  
S Murugesan, K Balamurugan, C Sathiya Narayanan, PG Venkatakrishnan Study on EDM of Al-15% SiC MMC using Solid and Multihole electrodes-A Taguchi approach European Journal of Scientific Research 68 161-171 2012  
K Elangovan, C Sathiya Narayanan, R Narayanasamy Modelling the correlation between the geometrical features and the forming limit strains of perforated Al 8011 sheets using artificial neural network International journal of material forming 4 389-399 2011  
G Venkatachalam, S Narayanan, C Sathiya Narayanan, R Abhishek Analysis of perforated sheet metals with square and hexagonal holes using finite element method Journal of Manufacturing Engineering 6 1-4 2011  
R Narayanasamy, C Sathiya Narayanan, Palani Padmanabhan, T Venugopalan Effect of mechanical and fractographic properties on hole expandability of various automobile steels during hole expansion test The International Journal of Advanced Manufacturing Technology 47 1-4 2010  
K Elangovan, C Sathiya Narayanan, R Narayanasamy Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network Computational Materials Science 47 1072-1078 2010  
K Elangovan, C Narayanan Application of Taguchi approach on investigation of formability for perforated Al 8011 sheets International Journal of Engineering, Science and Technology 2 300-309 2010  
R Narayanasamy, M Ravi Chandran, C Vanitha, C Sathiya Narayanan Effect of annealing on forming limit diagram and crystallographic textures of aluminium 5086 grades annealed at four different temperatures Materials Science and Technology 25 1193-1206 2009  
R Narayanasamy, NL Parthasarathi, C Sathiya Narayanan Effect of microstructure on void nucleation and coalescence during forming of three different HSLA steel sheets under different stress conditions Materials & Design 30 1310-1324 2009  
R Narayanasamy, NL Parthasarathi, C Sathiya Narayanan, T Venugopal, HT Pradhan A study on fracture behaviour of three different high strength low alloy steel sheets during formation with different strain ratios Materials & Design 29 1868-1885 2008  
R Narayanasamy, NL Parthasarathi, R Ravindran, C Sathiya Narayanan Strain limit of extra galvannealed interstitial-free and bake hardened steel sheets under different stress conditions Journal of Iron and Steel Research, International 15 56-60 2008  
R Narayanasamy, NL Parthasarathi, R Ravindran, C Sathiya Narayanan Analysis of fracture limit curves and void coalescence in high strength interstitial free steel sheets formed under different stress conditions Journal of materials science 43 3351-3363 2008  
R Narayanasamy, J Satheeesh, CS Narayanan Experimental evaluation of wrinkling limit diagrams for aluminium alloy 5052 sheets annealed at different temperatures The Journal of Strain Analysis for Engineering Design 43 149-163 2008  
R Narayanasamy, J Satheesh, C Sathiya Narayanan Effect of annealing on combined forming, fracture and wrinkling limit diagram of Aluminium 5086 alloy sheets International Journal of Mechanics and Materials in Design 4 31 2008  
R Narayanasamy, C Sathiya Narayanan Forming, fracture and wrinkling limit diagram for if steel sheets of different thickness Materials & Design 29 1467-1475 2008  
R Narayanasamy, C Sathiya Narayanan, NL Parthasarathi Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets Materials Science and Engineering: A 445 427-439 2007  
R Narayanasamy, C Sathiya Narayanan Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions Materials & design 28 1555-1576 2007  
R Narayanasamy, C Sathiya Narayanan Forming limit diagram for interstitial free steels supplied by Ford India Motors Materials & design 28 16-35 2007  
R Narayanasamy, C Sathiya Narayanan Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies Materials & design 28 254-259 2007  
R Narayanasamy, C Sathiya Narayanan Experimental analysis and evaluation of forming limit diagram for interstitial free steels Materials & design 28 1490-1512 2007  
R Narayanasamy, C Sathiya Narayanan, NL Parthasarathi, R Ravindran Effect of annealing temperature on void coalescence in 5086 aluminium alloy formed under different stress conditions International Journal of Mechanics and Materials in Design 3 293-307 2006  
R Narayanasamy, C Sathiya Narayanan Some aspects on fracture limit diagram developed for different steel sheets Materials Science and Engineering: A 417 197-224 2006  
R Narayanasamy, C Sathiya Narayanan Forming limit diagram for Indian interstitial free steels Materials & design 27 882-899 2006  
R Narayanasamy, C Sathiya Narayanan Forming limit diagram for interstitial free steels Part I Materials Science and Engineering: A 399 292-307 2005  
R Narayanasamy, C Sathiya Narayanan FORMABILITY OF HSLA AND EDDQ STEELS Innovating the Future Through Manufacturing   296 2005  
R Narayanasamy, C Sathiya Narayanan Formability of HSLA and EDDQ steels of tube products of India CSIR     2005  

Conferences/Workshops/Symposia Proceedings

Author(s) Title of Abstract/ Paper Title of the Proceedings Page numbers Conference Theme Venue Year
K A Selvarajan, C Sathiya Narayanan, C Raju Co efficient of Performance between Single and Multi Point Incremental Forming Tools ( Patent Protected) for Similar Components AMPIE’18   International Conference MIET Namakkal 2018
K A Selvarajan, C Sathiya Narayanan, C Raju Development of Multi Point Incremental Forming Tools (Patent Protected) – An overview from starting stage prototypes AMPIE’18   International Conference MIET Namakkal 2018
K A Selvarajan, C Sathiya Narayanan, C Raju Development of Database for Literature Review on Multi Point Incremental Forming Tools (Patent Protected) AMPIE’18   International Conference MIET Namakkal 2018
K A Selvarajan, C Sathiya Narayanan Multiple Sheet Single Point Incremental Forming for dual phase steel sheet CDAMIES-2018   International Conference NIT Trichy 2018
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Optimization and application of VMC in small-hole fabrication of CFRP composites International Conference on Recent Advances in Engineering & Technology (ICRAET-2017)   Others MAM School of Engineering, Trichy 2017
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Effect of machining parameters on hole quality of micro drilling for CFRP International Conference on materials, design and manufacturing process (ICMDM 2016)   International Conference CEG Chennai 2016
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Optimization of machining parameter on drilling of CFRP composite desirability function analysis by Taguchi method Second national level conference on Materials and Metallurgical Application (NCMMA-16)   International Conference Nadar Saraswathi College of Engineering 2016
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Optimization Model in Computer Numerical Control Micro Step turning Process Proceedings of the International Colloquium on Materials, Manufacturing and Metrology   International Conference IT madras 2014
V Balasubramaniam, N Baskar, C Sathiya Narayanan Optimisation of Electrical discharge machining parameters using artificial neural network with different electrodes 5th Int and 26 All India AIMTDR   International Conference   2014
D Rajkumar, P Ranjithkumar, C Sathiya Narayanan Micromachining of Surface Roughness using Computer Numerical Control Lathe An International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING-COPEN 2013   International Conference NIT, Calicut 2013
V Balasubramaniam, N Baskar, C Sathiya Narayanan Grey relational analysis approach for machining parameters optimisation in EDM process INCAMA 2013   International Conference kalasalingam university 2013
V Balasubramaniam, N Baskar, C Sathiya Narayanan Optimization of EDM parameters for Titanium alloy using L27 orthogonal array with Taghuchi Technique AIMTDR 2012, 25th International conference and 4th AIMTDR   International Conference Jadavpur University, Kolkata 2012
V Balasubramaniam, N Baskar, C Sathiya Narayanan Mathematical Modeling and Analysis of Electrical Discharge Machining on Al MMC-5 vol % SiCp composites AIMTDR 2012, 25th international conference and 4th AIMTDR   International Conference Jadavpur University, Kolkata 2012
V Balasubramaniam, N Baskar, C Sathiya Narayanan Investigation of Micromachining on CNC International Conference INCOSET- 2012   International Conference JJ College of Engineering and Technology, Tamilnadu 2012
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Optimization of EDM Process Parameters for Al 6061-3%TIC Composite Using Grey Relational analysis AIMTDR-2010   International Conference Andhra University, Visakhapatnam.A.P 2010
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Optimization of EDM Parameters for Inconel 718 Using L18 Array with Grey Relational Analysis AIMTDR 10   International Conference Andra University College of Engineering, Vishakapa 2010
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Investigation of surface quality, MRR, EWR for composite materials in EDM process ETAM-2010, National conference on Emerging Technologies in Advanced Manufacturing   Others K. LN college of Engineering, Pottapalayam 2010
S Dhanabalan, K Sivakumar, C Sathiya Narayanan The Use of Orthogonal Array With Taguchi Technique To Optimize The Electrical Discharge Machining Process With Multiple Performance Characteristics For Titanium Grades ICAIEA 2010   International Conference Anna university Gundy. Chennal 2010
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Multiple Performance Characteristic Optimizations of Robust Technique For Titanium Alloy COSMA '09   International Conference NIT, CALICUT 2009
S Dhanabalan, K Sivakumar, M Ganesan, C Sathiya Narayanan Optimal Machining Parameters In Electrical Discharge Machine Conventional Optimization Technique TEAM-TECH 2009   International Conference BANGLORE 2009
S Dhanabalan, K Sivakumar, M Ganesan, C Sathiya Narayanan Multi - Objective Optimization of EDM Parameters Using Intelligent Technique For Titanium Alloy TEAM-TECH 2009   International Conference BANGLORE 2009
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Multiple Performance Characteristic Optimization Of EDM Parameters Using Orthogonal Array And Neural Network For Titanium Alloy TEAM -TECH 2009   International Conference BANGLORE 2009
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis For Titanium Alloy INDIA-JAPAN CONFRENCE on Advances in Material Processing   International Conference Annamalai University 2009
R Narayanasamy, N L Parthasarathi, R Ravindran, C Sathiya Narayanan Some Aspects of Formability Studies on Automotive High Strength Interstitial Free (IF) Steels at room temperature NCAM -2007   International Conference PSG College of Technology, Coimabatore 2007
R Narayanasamy, R Ravindran, N L Parthasarathi, C Sathiya Narayanan Void Analysis of Aluminium Alloy 5086 Formed under Different Stress Conditions At Different Annealing Temperature RTME – 2007   Others Saranathan College of Engineering, Trichy 2007
R Narayanasamy, N L Parthasarathi, R Ravindran, C Sathiya Narayanan A Comparative study on Strain Limit of Extra Galvannealed interstitial Free and Bake Hardened Steel Sheets under Different Stress Conditions RTME-2007   Others Saranathan College of Engineering, Trichy 2007
S Dhanabalan, K Sivakumar, C Sathiya Narayanan Application of Taguchi Method in the optimization of EDM parameters for surface roughness In Titanium National Conference on Emerging Trends in Mechanical Engineering and Sciences - ETIMES 2007   International Conference Bannari Amman Institute of Technology, Sathyamanga 2007
C Sathiya Narayanan, R Narayanasamy Forming Limit Diagram for Interstitial Free Steels International Conference on Recent Advances in Materials Processing Technology   International Conference National Engineering College, Kovilpatti, Tamilnadu 2005
R Narayanasamy, C Sathiya Narayanan Formability of HSLA and EDDO steels AIMTDR Conference   International Conference VIT Vellore 2004
C Sathiya Narayanan, R Narayanasamy Farming Limit Diagram for Stainless Steel Sheet 430 Grade National Conference on Recent Advances in Mechanical Engineering   Others National Engineering College, Kovilpatti, Tamilnadu 2004