1

Tribological studies of glass filled Nylon 6 composites in self-mated contacts and against AISI D2 steel disc

Conference

Materials Today

SudhirKumar,  D.Jafrey DanielJames, K.Panneerselvam and Barnik Saha Roy

  44,   2021,   1939-1943

2

Experimental investigation and multi response optimization of turning process parameters for Inconel 718 using TOPSIS approach

Conference

Materials Today

R.Thirumalai, M.Seenivasan and K.Panneerselvam

  45,   2021,   467-472

3

A comparative assessment in sequential μ-drilling of Hastelloy-X using laser in combination with μ-EDM and μ-ECM

Article

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Sivaprasad P.V.; Panneerselvam K.; Noorul Haq A.

  43,   2021

4

Manufacturing and Characterization of Tungsten Particulate-Reinforced AW106 Epoxy Resin Composites

Article

 Transactions of the Indian Institute of Metals

E.JensonJoseph                  K.Panneerselvam

  74,   2021,   817-825

5

Investigation on the influence of tungsten particulate in mechanical and thermal properties of HD50MA180 high density polyethylene composites

Article

 Materials Research Express

Jenson Joseph E     and  K Panneerselvam

  7,   2020

6

Process parameters optimization for friction vibration joining of polypropylene/spheri glass composites using topsis

Article

 Surface Review and Letters

D. JAFREY DANIEL  and K.PANNEERSELVAM

  27,   2020

7

Joining of PEEK plates by friction stir welding process

Conference

Materials Today

J. VinodhJose K.Panneerselvam

  39,   2020,   1635-1639

8

Effect of particulate fillers on mechanical, metallurgical and abrasive behavior of tungsten reinforced HDPE composites: A Taguchi approach

Conference

Materials Today

E.Jenson Joseph K.Panneerselvam

  39,   2020,   1228-1234

9

Experimental investigation and optimization of abrasive wear characteristics of polypropylene nanocomposites

Article

 Materials Research Express

Jafrey Daniel D            and       Panneerselvam K

  7,   2020

10

A NOVEL STUDY on SURFACE MODIFICATION of PALMYRA FIBERS for ENHANCING MECHANICAL and THERMAL PROPERTIES

Article

Surface Review and Letters

Raghavendra, T.;Panneerselvam, K.

  27,   2020

11

An investigation on antibacterial filler property of silver nanoparticles generated from Walnut shell powder by insitu process

Conference

Materials Today

S.Mohan K.Panneerselvam

  39,   2020,   368-372

12

Mechanical and Thermal Characterization of Camphor Soot Embedded Coir Fiber Reinforced Nylon Composites

Article

 Fibers and Polymers

T Raghavendra,             K Panneerselvam

  21,   2020,   2569-2578

13

Investigation on Thermal and Tribological Properties of Polypropylene/Spheri Glass 3000 Composites Processed by Melt Intercalation Method

Article

Silicon

Jafrey Daniel, D. Panneerselvam, K.

  11,   2019,   2885-2894

14

A Novel Study on Thermal Stability of Camphor Soot Reinforced Coir Fibers

Article

Fibers and Polymers

Raghavendra T.

  19,   2018,   1567-1575

15

Microstructure evaluation on friction stir welding of cryorolled 2219 aluminum alloy

Article

 Journal of Testing and Evaluatio

Kamal Babu, K. Panneerselvam, K. Sathiya,P             Noorul Haq, A.  Sundarrajan, S.  Mastanaiah,P. Srinivasa Murthy, C. V.

  47,   2018

16

Experimental investigation of resistance welded polypropylene nanocomposite joints

Article

Journal of Adhesion Science and Technology

Jafrey, Daniel D. Panneerselvam, K.

  32,   2018,   2350-2363

17

Multi-performance optimization of micro-drilling using taguchi technique based on membership function

Article

 Indian Journal of Engineering and Materials Sciences

Shunmugesh, K.;Panneerselvam, K.

  25,   2018,   383-390

18

Investigation on the effects of Cloisite 30B and copolymer (ethylene and butyl acrylate) reinforcement with polypropylene thermoplastic by melt intercalation method

Article

 Journal of Thermoplastic Composite Materials

Daniel, D. Jafrey; Panneerselvam, K.

  31,   2018,   1371-1392

19

Multi-performance Optimization of Drilling Carbon Fiber Reinforced Polymer Using Taguchi: Membership Function

Article

 Transactions of the Indian Institute of Metals

Shunmugesh,K.; Panneerselvam, K.

  71,   2018,   1615-1627

20

Abrasive wear of polypropylene/Cloisite 30B/Elvaloy AC 3427 nanocomposites

Article

Journal of Composite Materials,

Daniel, D. Jafrey; Panneerselvam, K.

   52,   2018,   1833-1843

21

Corrosion properties of cryorolled aa2219 friction stir welded joints using different tool pin profiles

Article

Surface Review and Letters

Kamal Babu, K. Panneerselvam, K. Sathiya, P.            Noorul Haq, A. Sundarrajan, S. Mastanaiah, P. Srinivasa Murthy, C. V.

  25,   2018

22

Investigations on dry sliding wear behaviour of nylon-6 and GFR nylon-6 composites using Taguchi technique

Article

 Indian Journal of Engineering and Materials Science

Kumar, Sudhir; Panneerselvam, K.

  25,   2018,   89-97

23

Mechanical Properties of Polypropylene Nanocomposites: Dispersion Studies and Modelling

Article

 Transactions of the Indian Institute of Metals

Daniel, D. Jafrey; Panneerselvam, K.

  71,   2018,   225-230

24

Parameter optimization of friction stir welding of cryorolled AA2219 alloy using artificial neural network modeling with genetic algorithm

Article

 International Journal of Advanced Manufacturing Technology

Kamal Babu, K.; Panneerselvam, K.; Sathiya, P.;          Noorul Haq, A.; Sundarrajan, S.; Mastanaiah, P.; Srinivasa Murthy, C. V.

  94,   2018,   3117-3129

25

Influences of metastable θ″, θ′ and stable θ intermetallics formed during cryorolling and friction stir welding process on AA2219

Article

 Journal of Alloys and Compounds

Kamal Babu, K.;Panneerselvam, K.;Sathiya, P.;Haq, A. Noorul;Sundarrajan, S.;Mastanaiah, P.;Srinivasa Murthy, C. V.

  732,   2018,   624-629

26

Effects of various tool pin profiles on mechanical and metallurgical properties of friction stir welded joints of cryorolled AA2219 aluminium alloy

Article

 Metallurgical Research and Technology

Kamal Babu, K; Panneerselvam, K;                Sathiya, P;           Noorul Haq, A;           Sundarrajan,S;  Mastanaiah,P; Srinivasa Murthy,C.V

  115,   2018

27

Investigation and optimization of machining parameters in drilling of carbon fiber reinforced polymer (CFRP) composites

Article

 Pigment and Resin Technology

Shunmugesh, K. Panneerselvam, K.

  46,   2017,   21-30

28

Optimization of drilling process parameters Via Taguchi, TOPSIS and RSA techniques

Article

 Archives of Metallurgy and Materials

Shunmugesh, K. Panneerselvam, K.

  62,   2017,   1803-1812

29

Study on Tensile Strength, Impact Strength and Analytical Model for Heat Generation in Friction Vibration Joining of Polymeric Nanocomposite Joints

Article

 Polymer Engineering and Science

Jafrey, Daniel D.; Panneerselvam, Kavan

  57,   2017,   495-504

30

Mechanical and Thermal Behaviour of Polypropylene/Cloisite 30B/Elvaloy AC 3427 Nanocomposites Processed by Melt Intercalation Method

Article

 Transactions of the Indian Institute of Metals

Daniel, D. Jafrey; Panneerselvam, K.

  70,   2017,   1131-1138

31

Optimization of machining process parameters in drilling of CFRP using multi-objective Taguchi technique, to PSIS and RSA techniques

Article

 Polymers and Polymer Composites

Shunmugesh, K.; Panneerselvam, K.

   25,   2017,   185-192

32

Grey Relational Analysis Based Optimization of Multiple Responses in Drilling of Carbon Fiber-Epoxy Composites

Conference

 Materials Today: Proceedings

Shunmugesh, K.; Panneerselvam, K.

  4,   2017,   2861-2870

33

Manufacturing Issues of Polypropylene Nanocomposite by Melt Intercalation Process

Conference

 Materials Today: Proceedings

Daniel, D. Jafrey; Panneerselvam, K.

  4,   2017,   4032-4041

34

Effects of mechanical, metallurgical and corrosion properties of cryorolled AA2219-T87 aluminium alloy

Conference

 Materials Today: Proceedings

Babu, K. Kamal; Panneerselvam, K.; Sathiya, P.;          Noorul Haq, A.; Sundarrajan, S.; Mastanaiah, P.; Srinivasa Murthy, C. V.

  4,   2017,   285-293

35

EXPERIMENTAL INVESTIGATION on FRICTION STIR WELDING of CRYOROLLED AA2219 ALUMINUM ALLOY JOINTS

Article

 Surface Review and Letters

Babu, K. Kamal; Panneerselvam, K.; Sathiya, P.;              Haq, A. Noorul; Sundarrajan, S.; Mastanaiah, P.; Murthy, C. V.Srinivasa

   24,   2017

36

Machinability study of Carbon Fiber Reinforced Polymer in the longitudinal and transverse direction and optimization of process parameters using PSO–GSA

Article

 Engineering Science and Technology, an International Journal

Shunmugesh, K.; Panneerselvam, K.

  19,   2016,   1552-1563

37

Modeling of tensile properties, dispersion studies, and hardness evaluation of Cloisite 30B in polypropylene with Elvaloy AC 3427 as compatibilizer

Article

 Journal of Composite Materials

Jafrey Daniel, D.; Panneerselvam, K.

  50,   2016,   3219-3227

38

Optimization of process parameters in micro-drilling of Carbon Fiber Reinforced Polymer (CFRP) using taguchi and grey relational analysis

Article

 Polymers and Polymer Composites

Shunmugesh, K.; Panneerselvam, K.

  24,   2016,   499-506

39

Tribological properties of glass fiber reinforced nylon 6 against various counterparts

Conference

 international conference on advances in production and industrial engineering

Sudhir kumar and      K. Panneerselvam

  2015,   359-364

40

Dry sliding wear cheracteristics of pure and glass fiber reinforced nylon 6 against AISI D2 steel disc

Conference

 international conference on Advances in materials, Manufacturing and Applications

Sudhir kumar and      K. Panneerselvam

  2015,   1003-1010

41

“Research on tribological behaviors of pure and glass fiber reinforced nylon 6 composites against polymer disc”

Article

Journal of material science and mechanical engineering

Sudhir kumar and      K. Panneerselvam

   Vol. 2, No. 6,   2015,   24-28

42

Multi objective optimization of friction and wear of pure and glass fiber reinforced nylon 6 composites using taguchi based grey relational technique”

Article

 Journal of material science and mechanical engineering

Sudhir kumar and      K. Panneerselvam

  Vol. 2, No. 10,   2015,   7-11

43

Multi Objective Optimization of Tribological Property of Nylon 6 Composites using Hybrid Taguchi” Grey Relational Analysis and Cuckoo Search Algorithm

Conference

 ISME Conference,

Sudhir kumar and      K. Panneerselvam

2015

44

Mechanical Investigation of Friction Stir Welded Polymeric Nano composites Joints

Conference

 ISME Conference, Year 2015

Jafrey Daniel D and    K. Panneerselvam

2015

45

Parameters optimization in FSW of polypropylene based on RSM

Article

 Multidiscipline Modeling in Materials and Structures

Panneerselvam, K.; Lenin, Kasirajan

  11,   2015,   32-42

46

"Parameters optimization in FSW of Polypropylene base on RSM

Article

 Multidiscipline modeling in Materials and Structures

Panneerselvam, K., and K. Lenin.

  11(1),   2014,   32 – 42.

47

An experimental investigation on polymeric nano composite material

Conference

 International and 26th All India Manufacturing Technology, Design and Research Conference, Year 2014

Jafrey Daniel D and    K. Panneerselvam

2014

48

Joining of Nylon 6 plate by friction stir welding process using threaded pin profile,

Article

 Materials and Design (Elsevier)

Lenin, K.,                       K. Panneerselvam

  53,   2014,   302−307.

49

Process parameters optimization for friction welding of polypropylene materials using Taguchi’s approach,

Article

 Journal of Scientific & Industrial Research

K Lenin, H Abdul Shabeer, K Suresh Kumar and                     K Panneerselvam,

  73,   2014,   369-374.

50

Optimization of CNC Turning Parameters with Carbide Tool for Surface, Roughness Analysis Using Taguchi Analysis,

Article

 Research Journal of Engineering Sciences

Shunmugesh K., Panneerselvam K., Pramod M. and Amal George

  3(6),   2014,   1-7

51

A nova Based Optimization of Machining Parameters in Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites,

Article

 International Journal of Emerging Engineering Research and Technology

Shunmugesh. K, Panneerselvam. K, Jospaul Thomas

  2(3),   2014,   53-60.

52

Optimization of Turning Parameters with Carbide Tool for Surface Roughness Analysis

Article

 International Journal of Emerging Engineering Research and Technology

Shunmugesh K., Panneerselvam K., Pramod M. and Amal George

  2(2),,   2014,   149-154.

53

Optimising Drilling Parameters Of GFRP By Using Grey Relational Analysis

Article

 International Journal of Research in Engineering and Technology

Shunmugesh K, Panneerselvam. K, Jospaul Thomas

  03(06),   2014,   302-305

54

Joining of Nylon 6 plate by friction stir welding process using threaded pin profile

Article

 Materials and Design

Panneerselvam, K.;Lenin, K.

  53,   2014,   302-307

55

Machining parameter optimization of bidirectional CFRP composite pipe by genetic algorithm

Article

 Materialpruefung/Materials Testing

Vijaykumar, Krishnasamy; Panneerselvam, Kavan; Sait, Abdullah Naveen

  56,   2014,   728-736

56

Machinability study of hybrid-polymer composite pipe using response surface methodology and genetic algorithm

Article

 Journal of Sandwich Structures and Materials

Kumar, K. Vijay;      Sait, A. Naveen; Panneerselvam, K.

  16,   2014,   418-439

57

Process parameters optimization for friction stir welding of polypropylene material using taguchi's approach

Article

 Journal of Scientific and Industrial Research

Lenin, K.;           Shabeer, H. Abdul; Kumar, K. Suresh; Panneerselvam, K.

  73,   2014,   369-374

58

Optimization Of Turning Parameters With Carbide Tool For Surface Roughness Analysis Using Response Surface Methodology,

Article

 International Journal Of Research In Aeronautical And Mechanical Engineering Optimization Of Turning Parameters

Shunmugesh.K, Panneerselvam K, Amal George

  2(6),   2014,   17-27.

59

Machinability study of hybrid-polymer composite pipe using response surface methodology and genetic algorithm,

Article

Journal of Sandwich Structures and Material

K Vijay Kumar, A Naveen Sait, and          K Panneerselvam,

  16( 4),,   2014,   418-439.

60

Investigation of process parameters during FSW and FVW of casted Acrylic plate.

Conference

International conference on Production and Industrial Engineering

K. Panneerselvam and K. Lenin,

  2013,   36

61

Selection of FVW tool, feed rate and frequency for joining nylon 6 and polypropylene plates

Conference

International conference on Production and Industrial Engineering

K. Panneerselvam, K. Lenin and Sachin Kumar

  2013,   36

62

Investigation of effects of Tool forces and joint defects during FSW of Nylon 6 Plate

Conference

International conference of Advances in material processing and Characterization

K. Panneerselvam and K. Lenin,

  2013,   713-724.

63

Effects and Defects of the Polypropylene plate for Different parameters in Friction stir welding process

Article

International journal of Research in Engineering and Technology

K. Panneerselvam and K. Lenin

  2(2),   2013,   143-152

64

Study on hardness and microstructural characterization of friction stir welded nylon 6 plate

Article

International Journal of Mechanical Engineering

K. Panneerselvam and K. Lenin

  2(2),   2013,   51-62.

65

Optimizing the welding parameters of Friction stir welding by using resultant force and defects for Nylon 6 material

Article

International Journal of Mechanical Engineering

Lenin, K.,                       K.Panneerselvam,

  2(2),   2013,   77-84

66

Study on Friction stir welding of Nylon 6 plates.

Conference

International Conference on Engineering, Technology and Management

K. Panneerselvam and K. Lenin

   2012,   101-105.

67

Optimizations of Friction Stir Welding Parameters for Nylon 6 material

Conference

International Symposium for Research Scholars

K. Panneerselvam and K. Lenin

  2012,   47

68

Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel

Article

Optics and Laser Technology

Sathiya, P.; Panneerselvam, K.; Soundararajan, R.

  44,   2012,   1905-1914

69

Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm

Article

 Materials and Design

Sathiya, P.; Panneerselvam, K.; Abdul Jaleel, M. Y.

  36,   2012,   490-498

70

Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate

Article

article Procedia Engineering

K. Panneerselvam and K. Lenin

  38,   2012,   3927-3940

71

Investigation on effect of tool forces and joint defects during FSW of polypropylene plate

Conference

Conference Paper Procedia Engineering

Panneerselvam, K.; Lenin, K.

  38,   2012,   3927-3940

72

Study on resistance welding of glass fiber reinforced thermoplastic composites

Article

Materials and Design

Panneerselvam, K.; Aravindan, S.;    Noorul Haq, A.

  41,   2012,   453-459

73

Process Parameter Optimization of the Argon shielded laser welding of super austenitic stainless steel

Conference

 International Conference on MetaComputing

P.Sathiya, K.Panneerselvam and M.Y.AbdulJaleel

2012

74

Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate.

Conference

International conference on Modeling, optimization and Computing

K. Panneerselvam and K. Lenin,

2012

75

“Process Parameter Optimization of the Argon shielded laser welding of super austenitic stainless steel”published in proceedings

Conference

International Conference on MetaComputing

P.Sathiya, K.Panneerselvam and M.Y.AbdulJaleel

2011

76

Tool geometry for friction stir welding - Optimum shoulder diameter

Article

Article Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

M. Mehta ., A. Arora ., A. De ., T. DebRoy .,

   42,   2011,   2716-2722

77

Optimization of end milling parameters for glass fiber reinforced plastic (GFRP) using grey relational analysis

Conference

Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011

Panneerselvam, K.; Aravindan, S.;    Noorul Haq, A.

  2011,   1104-1107

78

Advanced welding of composite material

Conference

Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011

Panneerselvam, K.; Aravindan, S.;    Noorul Haq, A.

  2011,   1067-1071

79

OPTIMIZATION OF END MILLING PARAMETERS FOR GLASS FIBER REINFORCED PLASTIC (GFRP) USING GREY RELATIONAL ANALYSIS”,

Conference

Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2011

80

Advanced Welding of Composite Material”,i

Conference

 International Conference on Heterogeneous Material Mechanics

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2011,   1067-1071

81

TAGUCHI MULTI-PERFORMANCE CHARACTERISTICS OPTIMIZATION IN MILLING OF GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITES USING UTILITY CONCEPT

Conference

International Conference on Computational Methods in Manufacturing

K.Panneerselvam, K.Pradeep and P.Asokan

2011

82

Optimization of friction welding parameters using evolutionary computational techniques

Article

Journal of Materials Processing Technology

Sathiya, P.;  Aravindan, S.;         Haq, A. Noorul; Paneerselvam, K.

  209,   2009,   2576-2584

84

“Joining of thermoplastic by frictional vibration”,

Article

Journal of Modern Manufacturing Technology

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  1(1),,   2009,   83-92

85

“A Heuristic Approach For a Real Time -Mixed Model Assembly Systems To Reduce Idle Time And Material Handling Cost”,

Article

A Heuristic Approach For a Real Time -Mixed Model Assembly Systems To Reduce Idle Time And Material Handling Cost

K.Panneerselvam, S.Aravindan and A.NoorulHaq,

  1(2),   2009,   97-101

86

Hybrid of ANN with genetic algorithm for optimization of frictional vibration joining process of plastics

Article

International Journal of Advanced Manufacturing Technology

Panneerselvam, K.; Aravindan, S.;    Noorul Haq, A.

   42,   2009,   669-677

87

STUDY ON MILLING OF GLASS FIBER REINFORCED PLASTICS (GFRP) COMPOSITE

Conference

 National Conference of Emerging Materials and Technologies for India 2020, Year 2008

K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq

2008

88

Investigation on End milling of Glass Fiber Reinforced Plastic (GFRP) composites

Conference

All India seminar on Automation trends in manufacturing industries: cutting edge technologies & their impact, organized by The Institute of Engineers, Year 2008

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2008

89

An innovative approach for optimization of Frictional Vibration Joining Process”

Article

The International Journal for Manufacturing Science & Production

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  9, 3-4,,   2008,   203-216.

90

FEA analysis of resistance welded thermoplastic composite joints

Conference

conference paper proceedings of the IIW IC, Year 2008

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2008

91

Study on Milling of Glass Fiber Reinforced Plastic (GFRP) Composite

Conference

 International Conference on ADVANCES IN MANUFACTURING TECHNOLOGY (ICAMT2008) for Young Engineers, Year 2008

K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq

2008

92

STUDY OF MILLING OF GFRP COMPOSITE USING STATISTICAL ANALYSIS

Conference

National Conference of Emerging Trends in Mechanical Engineering and Sciences, Year 2007

K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq

2007

93

Fusion bonding of thermoplastic composites”

Conference

Proceedings of Second International Conference on Recent Advances in Composite Materials, Year 2007

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2007

94

Investigation and Analysis of Friction Stir Welding Parameters on Metal Matrix Composite (Al-SiC)

Conference

 Proceedings of international conference on Advanced materials and composite,, Year 2007

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2007

95

Optimization of friction welding parameters using simulated annealing

Article

Indian Journal of Engineering and Materials Sciences

Sathiya, P.;  Aravindan, S.;         Haq, A. Noorul; Panneerselvam, K.

   13,   2006,   37-44

96

Joining of thermoplastics and thermoplastic composites”

Conference

conference paper Asian Symposium on Materials and Processing, Year 2006

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2006     144

97

Resistance welding of thermoplastic composites”

Conference

International Symposium of Research Students on Materials Science and Engineering

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2006,   102

98

Optimization of process parameters for friction welding of ferritic stainless steel using taguchi technique

Conference

Proceedings of international conference on recent advances in materials & processing

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2006,   48

99

JOINING OF THERMOPLASTIC MATRIX COMPOSITES BY FRICTIONAL VIBRATION

Conference

conference paper National welding Seminar

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2005

100

“Optimization of Process Parameters of Friction Welding by Genetic algorithm”

Article

 Journal of Manufacturing Technology Today

P. Sathiya, S. Aravindan, A. Noorul Haq, K. Paneerselvam

   4,   2005,   9-15

101

“Joining of Polymeric Matrix Composites”

Article

article Published in IWS journal

K.Panneerselvam, S.Aravindan A.Noorul Haq and R.Krishnamurthy,

  1,   2005,   15-19

102

JOINING OF PLASTIC BY FRICTIONAL VIBRATION”

Conference

National Conference on Modeling and Analysis of Production System

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2004,   190-103.

103

DYNAMIC ANALYSIS OF A COMPRESSOR CRANKSHAFT

Conference

National Conference on Recent Trends in Manufacturing Modeling and Analysis, Year 2004

K.Panneerselvam, S.Aravindan and A.NoorulHaq

2004

104

Joining of plastic by frictional vibrations”,

Conference

International Symposium of Research Students on Materials Science and Engineering

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  66,   2004

105

Friction Stir Welding”

Conference

 International Exhibition & conference on Advancements in materials and Process Used in the Manufacturing of transport Vehicles & Automobiles

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2004,   29

106

Optimization of process parameters of Tungsten Inert Gas Welding using Evolutionary Computational Techniques”

Conference

International Symposium on smart Material and Systems

K.Panneerselvam, S.Aravindan and A.NoorulHaq

  2004,   376-383

107

Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis Original Research Article

Article

Procedia Engineering

K. Panneerselvam, K. Pradeep, P. Asokan

  38,   ,   3962-3968

108

Optimization of friction welding parameters using simulated annealing”

Article

 Indian journal of Engineering & Materials sciences

P. Sathiya, S.Aravindan,    A.Noorul Haq,  K.Panneerselvam

  1.13,   ,   37-44

109

Joining of Glass Fiber Reinforced Polypropylene Thermoplastic Composites”

Conference

InternationalandINCCOM-6 Conference on “Future Trends in Composite Materials andProcessing” IITK

K.Panneerselvam, S.Aravindan and A.NoorulHaq