Projects guided

Ph.D.

Sl. No

Name of the Thesis

Year

1

Heat transfer Augmentation studies in a circular tube fitted with helical screw inserts

Dec 2006

2

Real time studies of flow sensor less measurement and control

Mar 2007

3

Studies on intelligent pressure control

Sep 2008

4

Studies on Heat transfer Augmentation in a circular tube fitted with Right-Left helical twist insert

Mar 2009

5

Studies on Thermoacoustically Driven Thermoacoustic Refrigerator

May 2013

Ph.D. Co. Guided

Sl. No

Name of the Thesis

Year

1

Studies on Biodegradation of Chlorinated Aromatic Hydrocarbon

Dec 2008

2

Heat transfer characteristics of Nano fluids in a coiled agitated vessel

Jan 2013

M.S Guided

Sl. No

Name of the Thesis

Year

1

Experimental  and CFD studies  on effect of cut in baffle and turbine agitator on power consumption

May 2009

M.Tech.

Sl. No

Name of the Thesis

Year

  1.  

Fermentation of Citric acid from Commercial Sugar by Aspergillus Niger

 

  1.  

Studies on Flow Pattern and Pressure drop for the tube fitted with twisted tape and Kenics Element

 

  1.  

Studies on Circulating Fluidized Bed Drier

 

  1.  

Studies on Energy Audit in Combined Cycle Power Plant

 

  1.  

Studies on Fouling of Heat Exchangers and its Mitigation Technique

 

  1.  

Studies on Energy Audit in Large Utility Boiler

 

  1.  

Studies on Hydrodynamics of Circulating Fluidized Bed Drier

 

  1.  

Process Integration study of Ammonia plant

 

  1.  

Studies on Denitrification using Fluidized Bed

 

  1.  

Studies on Removal of Mercury –II by adsorption

 

  1.  

Studies on optimization of batch digester in Kraft pulp mill

 

  1.  

Experimental studies on Agitation

 

  1.  

Experimental studies on Etherification of Acetic acid with N-Butyl Alcohol

 

  1.  

Multi-phase flow Simulation of Liquid-Solid Fluidized Bed by using CFD-CFX

 

  1.  

Studies on Hydrodynamics of Annular Circulating Fluidized Bed with Dhal particles

Jan 2005

  1.  

CFD Simulation of Heat transfer in Laminar Flow through a circular tube with and without twisted tape internals

Jan 2005

  1.  

Studies on Hydrodynamics of Annular Circulating Fluidized Bed with Dhal particles

June 2006

  1.  

CFD Simulation of Heat transfer in Laminar Flow through a circular tube with and without twisted tape internals

June 2006

  1.  

Ohmic heating in Parboiling of Paddy and Energy Audit

June 2006

  1.  

Design of maximum Power point tracker for Photovoltaic Powered Water Pumping System

 

  1.  

CFD Simulation of Heat transfer Augmentation using varying width of twisted tape in laminar flow with power law fluid

 

  1.  

Fuzzy based control of Pressure

 

  1.  

Enhancement of heat exchanger control using optimized PID controller

 

  1.  

Analog implementation of and controller design of MIMO system

 

  1.  

Experimental and Simulation studies on power consumption in mixing using energy saving turbine agitator using water

 

  1.  

Pressure drop studies in helical coil fitted with inserts

 

  1.  

Experimental and Simulation studies on power consumption in mixing using energy saving turbine agitator using glycerol

 

  1.  

CFD simulation of heat transfer augmentation using helical screw inserts

 

  1.  

Studies on heat transfer augmentation in a circular tube fitted with straight half twist inserts

 

  1.  

Studies on heat transfer augmentation in a circular tube fitted with straight full twist inserts

 

  1.  

Studies on heat transfer augmentation in a circular tube fitted with straight full twist inserts with V cuts and varying twisted tape width

 

  1.  

CFD simulation of Thermoacoustic Prime mover

 

  1.  

Treatment of Tanning Effluent by Electrocoagulation and sonication

Dec 2012

  1.  

Catalytic wet air oxidation studies of Phenol in tricked bed red reactors

Dec 2012

  1.  

Enzyme based recovery of silver from exposed x-ray films

May 2013

  1.  

REMOVAL OF PHENOL FROM SYNTHETIC WASTEWATER USING CAULIFLOWER (Brassica oleracae) PEROXIDASE

May 2013

  1.  

Effects of Different Resonator Lengths on the performance of twin prime mover –CFD studies

Dec 2014

  1.  

CFD Simulation of twin thermoacoustic prime mover by varying composition of has mixture

Dec 2014

  1.  

Effects of temperature gradient on twin thermoacoustic prime mover-CFD studies

May 2014

  1.  

CFD Heat transfer studies of Carbon nano tube –water nano fluids in coiled agitated vessel

May 2014

  1.  

Formation of aromatics in Claus furnace

Dec 2014

  1.  

CFD studies on heat transfer characteristic of Al 2 O 3 –Ethylene glycol nano fluids in a coiled agitated vessel

Dec 2014

  1.  

Formation of aromatics inside Claus furnace

May 2015

  1.  

Experimental and Numerical studies on heat transfer characteristics of graphite-water micro fluids in a coiled agitated vessel

May 2015

  1.  

Experimental and Numerical studies on effect of coil fluid flow rate on heat transfer

Dec 2015

  1.  

Hydrogen production using Claus process

Dec 2015

B.Tech

Every year two or three batches of students comprising two students per batch have been being guided