1

Anand, R. B., Lajpat Rai, Singh, S. N. (2003) “Effect of turning angle on the flow and performance characteristics of Long S-shaped circular diffuser", Proc. Inst. Mech. Engg., Part G, Journal of Aerospace Engineering, Vol. 217, pp. 29 - 41

2

Anand, R. B., Lajpat Rai, Singh, S. N. (2005) "Flow Characteristics of Short and Long S-shaped Circular Diffusers: Effect of Reynolds Number, curvature Ratio and swirl", Computational Fluid Dynamics Journal, Vol. 14, pp. 191 - 203

3

Anand, R. B., Lajpat Rai, Singh, S. N.(2009) “Effect of inlet swirl on the performance of S-shaped circular diffuser”, International Journal of Turbo and Jet Engines, Vol. 26, No. 1, pp. 51 – 60

4

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M. (2009) "Stability of Diesohol using Biodiesel as Additive and its Performance and Emission Characteristics in a Compression Ignition Engine under Various Compression Ratios", International Journal of Applied Engineering Research (IJAER), Vol. 4, No. 9, pp. 1723 – 1738

5

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M.,( 2009) "Combustion Characteristics of Diesohol using Biodiesel as additive in a Direct Injection Compression Ignition Engine under Various Compression Ratios", Energy & Fuels, 23, pp. 5413–5422,  DOI:10.1021/ef900587h

6

Arul Mozhi Selvan, V., Anand, R.B., Udayakumar,M.,( 2009) “Stability, Performance and Emission Characteristics of Diesel-Ethanol Blend with Castor Oil as Additive in Variable Compression Ratio Engine”, SAE Paper No.32-0120

7

Arul Mozhi Selvan, V., Anand, R. B., (2009)Udayakumar, M., “Effects of Cerium Oxide Nanoparticle Addition in Diesel and Diesel-Biodiesel-Ethanol Blends on the Performance and Emission Characteristics of a CI Engine”, Journal of Engineering and Applied Science, Vol. 4, No. 7

8

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M., (2009)“Stability of diesohol blend with castor oil as additive and its performance and emission characteristics in a variable compression ratio engine”, International Journal of Power Engineering,  Vol. 1, No. 2, pp. 99-113

9

Marimuthu, M., Anand, R. B., Udayakumar, M. (2010)“Performance and emission characteristics of a DI diesel engine using palm oil and sunflower oil”, Internatioanl Journal of Electrical Engineering and Embedded Systems,  Vol. 1, No. 2, pp.41 – 48

10

Sadhik Basha, J., Anand, R. B.,(2010) “Performance and Emission Characteristics of a DI Compression Ignition Engine Using Carbon Nanotubes Blended Diesel”, International Journal of Advances in Thermal Science and Engineering, , Vol. 1, No. 1, pp. 67 – 76

11

Sadhik Basha, J., Anand, R. B., (2010)“Application of nanoparticle/nanofluid in compression ignition engines – A case study”, International Journal of Applied Engineering Research, , Vol. 5 (4), pp. 697 – 708

12

Sadhik Basha, J., Anand, R. B., “Effects of nano particle additive in the water-diesel emulsion fuel on the performance, emission and combustion characteristics of a diesel engine”, International Journal of Vehicle Design (Article in press)

13

Sadhik Basha, J., Anand, R. B., “Effects of alumina nano particle blended jatropha bio-diesel on working characteristics of a diesel engine”, International Journal of Industrial Engineering and Technology (Article in press)

14

Anand, R.B., Chandraprabhu, A., Richards, X.J.A., Hareshram, N.,( 2010) “Flow and Performance Characteristics of a Y-Shaped Diffusing Duct Using CFD”, International Journal of Aerodynamics,  Vol. 1, No. 2, pp. 115 - 129

15

Anand, R.B., Chandraprabhu, A., Richards, X.J.A., Hareshram, N.,( 2010) “Flow and Performance Characteristics of a Y-Shaped Diffusing Duct Using CFD”, International Journal of Aerodynamics, Vol. 1, No. 2, pp. 115 - 129

16

Sadhik Basha, J., Anand, R. B., “Effects of nano particle blended water-biodiesel emulsion fuel on working characteristics of a diesel engine“, International Journal of Global Warming, Vol. 2, No.4, pp. 330 – 346

17

Sadhik Basha, J., Anand, R. B.,(2011) “Role of nano additive blended bio-diesel emulsion fuel on the working characteristics of diesel engine”, Journal of Renewable and Sustainable Energy, (Pub.:  American Institute of Physics), DOI:10.1063/1.3575169

18

Sadhik Basha, J., Anand, R. B.,( 2011) “An experimental study in a CI engine using nano additive blended water-diesel emulsion fuel”, International Journal of Green Energy, Vol. 8, pp. 332 – 348, DOI: 10.1080/15435075.2011.557844

19

Sadhik Basha, J., Anand, R. B., “Influence of nano additive blended bio-diesel fuel on the working characteristics of a diesel engine”, Journal of Brazilian Society and Mechanical Sciences Engineering, Accepted for the publication

20

Anand, R. B., Lajpat Rai, Singh, S. N., Sharma, O. P.( 2001) “Flow Characteristics of a low aspect ratio 90/90 S-shaped diffuser”, Journal of Aeronautical Society of India,  Vol. 53, pp. 239 – 252

21

Anand, R. B., Lajpat Rai, Singh, S. N. (2008) “Effect of swirl on the flow characteristics of S-shaped diffusing duct”, Indian Journal of Engineering and Material Sciences,  Vol. 15, pp. 317 – 325

22

Prasad, B. V. S. S. S., Gowda, B. H. L., Anand, R. B.(1999)  "Flow induced vibrations of a circular cylinder in triangular arrangement”, Proc. International Conference on Fluid mechanics and Fluid Power, India,  pp. 246 – 255

23

Anand, R. B., Lajpat Rai, Singh, S. N. (2003)  "Performance characteristics of miniature S-shaped circular diffuser".  Proc. Fluent CFD Conference for India and South Asia, November, (No. of pages: 11)

24

Anand, R. B., Lajpat Rai, Singh, S. N.(2002)  "Effect of surface roughness on flow and performance characteristics of a 22.5/22.5 S-shaped circular diffuser using CFD", Proc. 2^nd International (29^th National) Conference on Fluid Mechanics and Fluid Power, , pp. 436 – 444

25

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M. (2008) “Stability and performance characteristics of diesohol using biodiesel as additive in compression ignition engine”, Proc. International Conference on Fascinating Advancement in Mechanical Engineering (FAME 2008), December 11 – 13,

26

Marimuthu, M., Anand, R. B., Udayakumar, M.( 2009) “Performance and emission characteristics of a DI diesel engine using palm oil and sunflower oil”, Proc. National conference on Energy Security for Rural Development (ESRD 2009), Gandhigram Rural University, Gandhigram, March 26, (This paper has also been published in the journal, International Journal of Electrical Engineering and Embedded Systems)

27

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M.,( 2009) “Stability of diesohol blend with castor oil as additive and its performance and emission characteristics in a variable compression ratio engine”,  Proc. National conference on Energy Security for Rural Development (ESRD 2009), Gandhigram Rural University, Gandhigram,   (This paper has also been published in the journal, International Journal of Power Engineering)

28

Arul Mozhi Selvan, V., Anand, R. B., Udayakumar, M. (2009) “Stability, Performance and Emission Characteristics of Diesel-Ethanol Blend with Castor Oil as Additive in Variable Compression Ratio Engine”, Proc. Small Engine Technology Conference (SETC 2009), Malaysia, JSAE and SAE International, Paper No. 2009-32-0120/20097120,  (This paper has also been published in SAE Transactions, Paper No. 2009-32-0120)

29

Sadhik Basha, J., Anand, R. B.,( 2009) “Performance and Emission Characteristics of a DI Compression Ignition Engine Using Carbon Nanotubes Blended Diesel”, Proc. International Conference on Advances in Mechanical Engineering (ICAME-2009), NIT, Surat, India, August 3-5, (Extended version of this paper has been published in the International Journal of Advances in Thermal Science and Engineering).

30

Anand, R. B., Lajpat Rai, Singh, S. N. (2001) "Flow and performance characteristics of a 22.5°/22.5° S-shaped circular diffuser", Proc. of the 28^th National Conference on Fluid mechanics and Fluid Power, India,  pp. 364 – 371

31

Rahim, A., Singh, S. N., Seshadri, V., Anand, R. B. (2003) “Numerical simulation of flow characteristics in a combustor model”, Proc. 30^th National Conference on Fluid Mechanics and Fluid Power, India

32

Marimuthu, M., Anand, R. B., Udayakumar, M. (2009) “Analysis of performance and pollutants emitted from a DI diesel engine using mixture of oxygenated agents with diesel”, National Conference on Emerging Trends in Mechanical Engineering, Trichy, Tamil Nadu, India