| Sl. No | Details of Papers Published in International/National Journals |
|---|---|
| 1 | Akhil Krishnan SR, Suresh Sivan, VC Midhun, Soumya Ranjan Behera (2023), Experimental and numerical investigation of solid-solid phase change material assisted heat sink with integrated heat pipe for electronic cooling, Journal of Energy Storage, volume (59), page: 106494 |
| 2 | X Michel Myures, S Suresh (2023), Nanofluidic electrolyte based on nitrogen doped reduced graphene oxide as an electrocatalyst for VO2+/VO2+ in vanadium redox flow battery, Journal of Energy Storage, volume (58), page 106387 |
| 3 | Krishnadass Karthick, S Suresh, KS Abhishek (2022),Effect of a eutectic mixture of D-Mannitol and Magnesium Chloride Hexahydrate on reversible solar thermoelectric power generation: An experimental study, Thermal Science and Engineering Progress, volume (36), page: 101523 |
| 4 | Seetharaman Sathyanarayanan, Sivan Suresh, CG Saravanan, M Vikneswaran, Gopinath Dhamodaran, Ankit Sonthalia, JS Femilda Josephin, Edwin Geo Varuvel (2022), Experimental investigation and performance prediction of gasoline engine operating parameters fueled with diisopropyl ether-gasoline blends: Response surface, Journal of Cleaner Production, volume (375), page: 133941 |
| 5 | Aaradhya Sharma, Neha Gunreddy, Akshith Reddy Mulamalla, Sakthivadivel Duraisamy, Suresh Sivan, Ganesh Kumar Poongavanam, Balaji Kumar (2022),Conductive and convective heat transfer augmentation in flat plate solar collector from energy, economic and environmental perspectives—a comprehensive review, Environmental Science and Pollution Research, page: 17899 |
| 6 | VC Midhun, S Suresh, Akhil Krishnan SR (2022), Effect of vacuum insulation panel integration in phase change material-based passive thermal management system for electronics package exposed to hot air environment, Journal of Energy Storage, volume (53), page: 105180 |
| 7 | Solaimalai Raja Rakkappan, Suresh Sivan, Mohammed Arshad Raza, Atharva Relkar, Harshit Mittal, Mainak Adak (2022), A facile and reliable approach to enhance the energy storage performance of 1-Decanol for sustainable and energy-efficient cold storage system, Journal of Energy Storage, volume (52), page: 104933 |
| 8 | S Sathyanarayanan, S Suresh, S Uslu, RS Shivaranjani, VP Chandramohan, S Simsek (2022),Optimization of gasoline engine emission parameters employing commercial and sucrolite-catalyst coated converter using response surface methodology, International Journal of Environmental Science and Technology, page: 17899. |
| 9 | A Dominic, VS Devahdhanush, S Suresh (2022), An experimental investigation on the effect of relative waviness on performance of minichannel heat sinks using water and nanofluids,Heat and Mass Transfer, volume(58), page: 17899 |
| 10 | Sathyanarayanan, S; Suresh, S;Sridharan, M (2022), Application of CFD and ANN in predicting the flow nature of flue gas in the catalytic converter, Journal of Scientific and Industrial Research (JSIR), volume (81), page:51-59 |
| 11 | Dominic, A; Devahdhanush, VS; Suresh, S (2022), An experimental investigation on the effect of relative waviness on performance of minichannel heat sinks using water and nanofluids, Heat and Mass Transfer, volume (58), page: 247-262 |
| 12 | Rakkappan,Solaimalai Raja;Sivan,Suresh; Raza, Mohammed Arshad;Relkar, Atharva;Mittal,Harshit; Adak, Mainak (2022), A facile and reliable approach to enhance the energy storage performance of 1-Decanol for sustainable and energy-efficient cold storage system, Journal of Energy Storage, volume (52), page: 104933 |
| 13 | Midhun, VC; Suresh, S; SR, Akhil Krishnan (2022), Effect of vacuum insulation panel integration in phase change material-based passive thermal management system for electronics package exposed to hot air environment, Journal of Energy Storage, volume (53), page: 105180 |
| 14 | Rakkappan, Solaimalai Raja; Sivan, Suresh; Praveen, B; Naarendharan, M; Sudhir, P Sai (2021), Thermal property, charging and discharging characteristics study on tetra-n-butyl ammonium bromide semi-clathrate hydrates for air-conditioning cold storage and secondary refrigerant applications, The Journal of Chemical Thermodynamics, volume (153), page: 106275 |
| 15 | Rakkappan, Solaimalai Raja; Sivan, Suresh; Ahmed, Shaik Naveed; Naarendharan, M; Sudhir, P Sai (2021), Preparation, characterisation and energy storage performance study on 1-Decanol-Expanded graphite composite PCM for air-conditioning cold storage system, International Journal of Refrigeration, volume (123), page: 91-101 |
| 16 | Krishnaswamy, Karthik; Sivan, Suresh (2021), Improvement in Thermal Hydraulic Performance by using Continuous V and W-Shaped Rib Turbulators in Gas Turbine Blade Cooling Application,Case Studies in Thermal Engineering, volume (1), page: 100857 |
| 17 | Rakkappan, Solaimalai Raja; Sivan, Suresh; Pethurajan, Vignesh;Aditya, A;Mittal, Harshit (2021), Preparation and Thermal Properties of Encapsulated 1-Decanol for Low-Temperature Heat Transfer Fluid Application, Colloids and Surfaces A: Physicochemical and Engineering Aspects, page: 126167 |
| 18 | Raj, Cyril Reuben; Suresh, S; Singh, Vivek Kumar; Bhavsar, RR; Chandrasekar, M; Archita, V (2021), Life cycle assessment of nanoalloy enhanced layered perovskite solid-solid phase change material till 10000 thermal cycles for energy storage applications, Journal of Energy Storage, volume (35), page: 102220 |
| 19 | Sathyamurthy, Vikesh; Gopalan, Sankar; Suresh, Sivan; Karuppudayar Ramaraj, Balasubramanian; Deenadayalan, Santhosh Kumar (2021), Comparative Study of Various Approaches in Analysis of TGA Data of Devolatilization of High Ash Indian Coal, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, page: 1-15 |
| 20 | Rakkappan, Solaimalai Raja; Sivan, Suresh; Preetham, Devarasetty Sasi; Sudhir, Pinjala Sai; Naarendharan, M (2021), Facile approach to fend off the supercooling phenomenon of water in a spherical enclosure for energy-efficient and sustainable cold thermal energy storage system, Sustainable Energy Technologies and Assessments, volume (45), page: 101076 |
| 21 | Midhun, VC; Suresh, S; Praveen, B; Neethikumar, R; Rajesh, KS (2021), Preparation, characterisation and thermal property study of micro/nanocellulose crystals for vacuum insulation panel application, Thermal Science and Engineering Progres, page: 101045 |
| 22 | Kumar, R Ram; Suresh, S; Suthakar, T (2021), Thermal management of polymer electrolyte membrane fuel cell with stearyl alcohol and fans combined, Journal of Energy Storage, volume: 41, page: 102847 |
| 23 | Rakkappan, Solaimalai Raja; Sivan, Suresh; Naarendharan, M; Sudhir, Pinjala Sai; Preetham, Devarasetty Sasi (2021), Experimental Investigation on Enhanced Energy Storage Characteristics of Spherically Encapsulated 1-Decanol/Expanded Graphite Composite for Cold Storage System,Journal of Energy Storage, volume: 41, page:102941 |
| 24 | Raj, Cyril Reuben; Suresh, S; Singh, Vivek Kumar; Bhavsar, RR; Vasudevan, Sudharshan; Archita, V (2021), Experimental investigation on nanoalloy enhanced layered perovskite PCM tamped in a tapered triangular heat sink for satellite avionics thermal management, International Journal of Thermal Sciences, volume: 167, page:107007 |
| 25 | Raj, Cyril Reuben; Suresh, S; Singh, Vivek Kumar; Bhavsar, RR; Panda, Anmol (2021), Experimental Investigation on CNT-Enhanced Neopentyl glycol Solid–Solid PCM for Applications of Thermal Control in Spatial Remote Sensing Instruments, Journal of the Indian Society of Remote Sensing, page: 1-12. |
| 26 | Karthick, Krishnadass; Suresh, S (2021), Effect of adding alumina nanoparticle in D-Mannitol for reversible solar thermoelectric power generation: An experimental study, Solar Energy Materials and Solar Cells, volume: 219, page: 110781. |
| 27 | Midhun, VC; Suresh, S; Praveen, B; Raj, Cyril Reuben (2021), Effect of vacuum insulation panel on active thermal management for electronics system exposed to thermal radiation, Thermal Science and Engineering Progress, page: 101117 |
| 28 | VC, Midhun; Suresh, S (2021), Thermal protection by integration of vacuum insulation panel in liquid-cooled active thermal management for electronics package exposed to thermal radiation, Journal of Thermal Science and Engineering Applications, page:1-34. |
| 29 | Sathyanarayanan, S; Suresh, S; Sridharan, M (2021), Effect of sucrose catalyst in the catalytic converter on performance and emission of spark ignition engine, Journal of Thermal Science and Engineering Applications, page: 1-25. |
| 30 | Sundaravel, Anand; Sivan, Suresh; Deenadayalan, Santhosh Kumar (2021), A new heat transfer correlation for supercritical water flowing in a vertical tube-an hitherto approach, International Communications in Heat and Mass Transfer, volume: 125, page: 105314 |
| 31 | Narayanasamy, Manikanda Prabu; Gurusamy, Sureshkannan; Sivan, Suresh; Senthilkumar, AP (2021), Heat transfer analysis of looped micro heat pipes with graphene oxide nanofluid for Li-ion battery, Thermal Science, volume:25, page: 395-405. |
| 32 | Krishnaswamy, Karthik; Sivan, Suresh; Ali, Hafiz Muhammad (2021),Influence of Narrow Rectangular Channel () on Heat Transfer and Friction for V-and W-Shaped Ribs in Turbine Blade Applications, International Journal of Photoenergy |
| 33 | Pethurajan, Vignesh; Suresh, Sivan; Mojiri, Ahmad; Konatt, Alan Johny (2020), Microencapsulation of nitrate salt for solar thermal energy storage-synthesis, characterisation and heat transfer study, Solar Energy Materials and Solar Cells, volume:206, page: 110308 |
| 34 | Salyan, Srikanth; Praveen, B; Singh, Harjit; Suresh, S; Reddy, A Sarath (2020), Liquid Metal Gallium in Metal Inserts for Solar Thermal Energy Storage: A Novel Heat Transfer Enhancement Technique, Solar Energy Materials and Solar Cells, volume:208, page: 110365 |
| 35 | Cyril Reuben Raj , Suresh S. Bhavsar, R. R. Singh, Vivek Kumar Govind, K. Akash (2020), Influence of fin configurations in the heat transfer effectiveness of Solid solid PCM based thermal control module for satellite avionics: Numerical simulations, Journal of Energy Storage, volume:29, page: 101332 |
| 36 | Mani, Dharmendra; Sivan, Suresh; Ali, Hafiz Muhammad; Ganesan, Udaya Kumar (2020), Investigation to improve the pool boiling heat transfer characteristics using laser-textured copper-grooved surfaces, International Journal of Photoenergy. |
| 37 | Venkata, Krishnan; Suresh, S (2020), Wettability Control of Copper Surface Using Picosecond Laser for Enhancing Condensation Heat Transfer, Materials Science Forum, volume:978, page: 505-513 |
| 38 | Kumar, G Udaya; Suresh, Sivan; Kumar, CS Sujith; Back, Seunghyun; Kang, Bongchul; Lee, Hee Joon (2020), A review on the role of laser textured surfaces on boiling heat transfer,Applied Thermal Engineering, volume: 174, page: 115274. |
| 39 | Kumar, R Ram; Suresh, S; Suthakar, T; Singh, Vivek Kumar (2020), Experimental investigation on PEM fuel cell using serpentine with tapered flow channels, International Journal of Hydrogen Energy, International Journal of Hydrogen Energy, volume: 45, page: 15642-15649. |
| 40 | Raj, Cyril Reuben; Suresh, S; Bhavsar, RR; Singh, Vivek Kumar; Govind, K Akash (2020), Influence of fin configurations in the heat transfer effectiveness of Solid solid PCM based thermal control module for satellite avionics: Numerical simulations, Journal of Energy Storage, volume: 29, page: 101332. |
| 41 | Raj, Cyril Reuben; Suresh, S; Vasudevan, Sudharshan; Chandrasekar, M; Singh, Vivek Kumar; Bhavsar, RR (2020), Thermal performance of nano-enriched form-stable PCM implanted in a pin finned wall-less heat sink for thermal management application, Energy Conversion and Management, volume: 226, page: 113446. |
| 42 | Raj, Cyril Reuben; Suresh, S; Upadhyay, Arijit; Govind, K Akash; Nivethaa, R (2020), Binary Mixture of Solid-Solid Phase Change Material: Synthesis, Characterization and Experimental Study, Materials Science Forum, volume: 978, page: 407-420. |
| 43 | NH, Mohamed Ibrahim; Udayakumar, M; Suresh, Sivan; Bhattacharyya, Suvanjan; Sharifpur, Mohsen (2020), Coupling LES with soot model for the study of soot volume fraction in a turbulent diffusion jet flames at various Reynolds number configurations, International Journal of Numerical Methods for Heat & Fluid Flow. |
| 44 | Midhun, VC; Suresh, S; Praveen, B; Shiju, RS (2020), Experimental study on phase transition behaviour of shape stable phase change material for application in vacuum insulation panel, Journal of Energy Storage, volume: 32, page: 101825. |
| 45 | Kalidoss, P; Venkatachalapathy, S; Suresh, S (2020), Optical and Thermal Properties of Therminol 55-TiO2 Nanofluids for Solar Energy Storage, International Journal of Photoenergy. |
| 46 | Sargunanathan, S; Ramanathan, K; Mohideen, S Tharves; Suresh, S (2020), Enhancing the Performance of the Standalone Rooftop SPV Module during Peak Solar Irradiance and Ambient Temperature by the Active Cooling of the Rear Surface with Spraying Water and the Front Surface with Overflowing Water, International Journal of Photoenergy, page: 1-12 |
| 47 | Gandhi, Nishant; Suresh, S (2020), Effect of mist concentration on the cooling effectiveness of a diffused hole mist cooling system, Journal of Thermal Analysis and Calorimetry, volume: 141, page: 2231-2238 |
| 48 | Balijepalli, Ramakrishna; Chandramohan, VP; Kirankumar, K; Suresh, S (2020), Numerical analysis on flow and performance characteristics of a small-scale solar updraft tower (SUT) with horizontal absorber plate and collector glass, Journal of Thermal Analysis and Calorimetry, volume:141, page: 2463-2474. |
| 49 | Lingayat, Abhay; Chandramohan, VP; Raju, VRK; Suresh, S (2020), Drying kinetics of tomato (Solanum lycopersicum) and Brinjal (Solanum melongena) using an indirect type solar dryer and performance parameters of dryer, Heat and Mass Transfer, page: 1-21. |
| 50 | Gandhi, Nishant; Sivan, Suresh (2020), A Study on the Effect of Angle in Diffused Hole Film Cooling Effectiveness at Different Blowing Ratios, International Journal of Turbo & Jet-Engines, volume: 01 |
| 51 | Iqbalshajahan, Mohamed; Michael, Jee Joe; Prakasajothi, M Arul; Suresh, Sivan; Nasr, Emad Abouel; Hussein, HMA (2020), Effect of Conical Strip Inserts and ZrO2/DI-Water Nanofluid on Heat Transfer Augmentation: An Experimental Study, Energies, volume:13, page: 4554. |
| 52 | Venkitaraj, KP; Suresh, S; Bibin, BS; Abraham, Jisa (2020), DSC Analysis of Nano-enhanced Monobasic and Binary Solid-Solid Phase Change Materials for Thermal Storage, Recent Asian Research on Thermal and Fluid Sciences, page: 47-57. |
| 53 | Anish, R; Mariappan, V; Suresh, S (2019), Experimental investigation on melting and solidification behaviour of erythritol in a vertical double spiral coil thermal energy storage system, Sustainable Cities and Society, volume: 44, page: 253-264. |
| 54 | Karthick, K., Suresh, S., Joy, G.C., Dhanuskodi, R.(2019), Experimental investigation of solar reversible power generation in Thermoelectric Generator (TEG) using thermal energy storage, Energy for Sustainable Development, volume:48, page: 107-114. |
| 55 | Venkitaraj, KP; Suresh, S (2019), Effects of Al2O3, CuO and TiO2 nanoparticles son thermal, phase transition and crystallization properties of solid-solid phase change material, Mechanics of Materials, volume: 128, page: 64-88. |
| 56 | Kumar, G Udaya; Krishnan, D Venkata; Suresh, S; Thansekhar, MR; Prasanna, R Varun; Jubal, M (2019), Investigating the combined effect of square microgrooves and CNT coating on condensation heat transfer, Applied Surface Science, volume: 469, page: 50-60. |
| 57 | Muraleedharan, M; Singh, H; Udayakumar, M; Suresh, S (2019), Modified active solar distillation system employing directly absorbing Therminol 55–Al2O3 nano heat transfer fluid and Fresnel lens concentrator, Desalination, volume: 457, page: 32-38. |
| 58 | Praveen, B; Suresh, S (2019), Thermal performance of micro-encapsulated PCM with LMA thermal percolation in TES based heat sink application, Energy Conversion and Management, volume: 185, page: 75-86. |
| 59 | Karthick, Krishnadass; Suresh, S; Singh, Harjit; Joy, Grashin C; Dhanuskodi, R (2019), Theoretical and experimental evaluation of thermal interface materials and other influencing parameters for thermoelectric generator system, Renewable Energy, volume: 134, page: 25-43. |
| 60 | Venkitaraj, KP; Suresh, S (2019), Experimental thermal degradation analysis of pentaerythritol with alumina nano additives for thermal energy storage application, Journal of Energy Storage, volume: 22, page: 1-16 |
| 61 | Hameed, M Shahul; Suresh, S; Singh, Rajive Kumar (2019), Comparative study of heat transfer and friction characteristics of water-based Alumina–copper and Alumina–CNT hybrid nanofluids in laminar flow through pipes, Journal of Thermal Analysis and Calorimetry, volume: 136, page: 243-253. |
| 62 | Jaygopal, J; Palappan, K Ganesh; Lakshminarasimhan, M; Rajavel, M; Suresh, S (2019), Experimental investigations of vanadium and nickel distribution while firing petcoke in a circulating fluidised bed test facility, International Journal of Oil, Gas and Coal Technology, volume: 20, page: 81-96. |
| 63 | Anbu, S; Venkatachalapathy, S; Suresh, S (2019), Convective heat transfer studies on helically corrugated tubes with spiraled rod inserts using TiO2/DI water nanofluids, Journal of Thermal Analysis and Calorimetry, volume: 137, page: 849-864. |
| 64 | Praveen, B; Suresh, S; Pethurajan, Vignesh (2019), Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink, Applied Thermal Engineering, volume: 156, page: 237-249. |
| 65 | Kalidoss, P; Venkatachalapathy, S; Suresh, S (2019), Photothermal energy conversion enhancement studies using low concentration nanofluids, Journal of Solar Energy Engineering, volume:141. |
| 66 | Karthick, Krishnadass; Suresh, S; Hussain, Mohammed Muaaz MD; Ali, Hafiz Muhammad; Kumar, CS Sujith (2019), Evaluation of solar thermal system configurations for thermoelectric generator applications: a critical review, Solar Energy, volume: 188, page: 111-142. |
| 67 | Elankovan, R; Suresh, S; Karthick, Krishnadass; Hussain, Mohammed Muaaz MD; Chandramohan, VP (2019), Evaluation of thermoelectric power generated through waste heat recovery from long ducts and different thermal system configurations, Energy, volume: 185, page: 477-491. |
| 68 | Raj, Cyril Reuben; Suresh, S; Bhavsar, RR; Singh, Vivek Kumar; Reddy, Sarath (2019), Effect of nano-gallium capsules on thermal energy storage characteristics of manganese organometallic SS-PCM, Thermochimica Acta, volume: 680, page: 178341-178343. |
| 69 | Venkitaraj, KP; Suresh, S; Praveen, B (2019), Energy storage performance of pentaerythritol blended with indium in exhaust heat recovery application, Thermochimica Acta, volume: 680, page: 1-14. |
| 70 | Raj, Cyril Reuben; Suresh, S; Bhavsar, RR; Singh, Vivek Kumar; Reddy, A Sarath; Upadhyay, Arijit (2019), Manganese-based layered perovskite solid–solid phase change material: Synthesis, characterization and thermal stability study, Mechanics of Materials, volume: 135, page: 88-97. |
| 71 | Venkitaraj, KP; Suresh, S; Praveen, B (2019), Experimental charging and discharging performance of alumina enhanced pentaerythritol using a shell and tube TES system, Sustainable Cities and Society, volume: 51, page: 101767. |
| 72 | Elankovan, R; Suresh, S; Karthick, K (2019), Modelling and Optimization of Heat Transfer Coefficients for Hot and Cold Sides of Thermoelectric Generator (TEG) system, International Research Journal of Engineering and Technology, volume: 06, page: 1174-1184. |
| 73 | Manickam, R; Kalidoss, P; Suresh, S; Venkatachalapathy, S (2019), Erythritol based Nano-PCM for Solar Thermal Energy Storage, International Research Journal of Engineering and Technology (IRJET), volume: 06, page: 1631-1636. |
| 74 | Ajith Krishnan R, Balasubramanian K., R Suresh, S (2019), An experimental investigation on the effect of gravitational orientation on flow boiling performance in different channel sizes ranges from minichannels to microchannels, Heat and Mass Transfer, page: 1-31. |
| 75 | Goud, Mallikarjuna; Reddy, Mugi Vishnu Vardhan; Chandramohan, VP; Suresh, S (2019), A novel indirect solar dryer with inlet fans powered by solar PV panels: drying kinetics of Capsicum Annum and Abelmoschus esculentus with dryer performance, Solar Energy, volume: 194, page: 871-885. |
| 76 | Cyril Reuben Raj, S Suresh, RR Bhavsar, Vivek Kumar Singh (2019),Recent developments in thermo-physical property enhancement and applications of solid solid phase change materials, Journal of Thermal Analysis and Calorimetry, page:1-27 |
| 77 | Krishnan, D Venkata; Kumar, G Udaya; Suresh, S; Jubal, M; Thansekhar, MR; Ramesh, Ravi (2019), Wetting transition in laser-fabricated hierarchical surface structures and its impact on condensation heat transfer characteristics, International Journal of Heat and Mass Transfer, volume: 140, page: 886-896. |
| 78 | Balasubramanian, Andi; Jayaraman, Venkatesan; Sivan, Suresh; Vairavan, Mariappan (2019), Experimental analysis of triple fluid vapour absorption refrigeration system driven by electrical energy and engine waste heat, Thermal Science, volume: 23, page: 2995-3001. |
| 79 | Pethurajan, Vignesh; Sivan, Suresh; Konatt, Alan Johny; Reddy, A Sarath (2018), Facile approach to improve solar thermal energy storage efficiency using encapsulated sugar alcohol based phase change material, Solar Energy Materials and Solar Cells, volume: 185, page: 524-535. |
| 80 | Anbu, S., Venkatachalapathy, S., Suresh, S (2018), Heat transfer and pressure drop studies of TiO2/DI water nanofluids in helically corrugated tubes using spiraled rod inserts, Heat and Mass Transfer/Waerme- und Stoffuebertragung, volume: 54, page: 1301-1311. |
| 81 | Venkitaraj, K.P., Suresh, S., Alwin Mathew, T., Bibin, B.S., Abraham, J (2018), An experimental investigation on heat transfer enhancement in the laminar flow of water/TiO2 nanofluid through a tube heat exchanger fitted with modified butterfly inserts, Heat and Mass Transfer/Waerme- und Stoffuebertragung, volume: 54, page: 813-829. |
| 82 | Arulprakasajothi, M., Elangovan, K., Chandrasekhar, U., Suresh, S (2018), Experimental study of a water-based titanium oxide nanofluid in a circular pipe with transition flow and conical strip inserts, Heat Transfer Research, volume: 49, page: 439-456. |
| 83 | Pethurajan, Vignesh; Sivan, Suresh; Joy, Grashin C (2018), Issues, comparisons, turbine selections and applications–An overview in organic Rankine cycle, Energy Conversion and Management, volume: 166, page: 474-488. |
| 84 | Salyan, Srikanth; Suresh, S (2018), Liquid metal gallium laden organic phase change material for energy storage: an experimental study, International Journal of Hydrogen Energy, volume: 43, page: 2469-2483 |
| 85 | Venkitaraj, KP; Suresh, S; Praveen, B; Nair, Sreeju C (2018), Experimental heat transfer analysis of macro packed neopentylglycol with CuO nano additives for building cooling applications, Journal of Energy Storage, volume: 17, page: 1-11. |
| 86 | P Rathnakumar, SM Iqbal, JJ Michael, S Suresh (2018), Study on performance enhancement factors in turbulent flow of CNT/water nanofluid through a tube fitted with helical screw louvered rod inserts, Chemical Engineering and Processing-Process Intensification , volume: 127, page: 103-110 |
| 87 | Venkitaraj, KP; Suresh, S (2018), Experimental study on the thermal storage performance and non-isothermal crystallization kinetics of pentaerythritol blended with low melting metal,Thermochimica Acta, volume: 662, page: 75-89. |
| 88 | Praveen, B; Suresh, S (2018), Experimental study on heat transfer performance of neopentyl glycol/CuO composite solid-solid PCM in TES based heat sink, Engineering science and technology, an international journal, volume: 21, page: 1086-1094 |
| 89 | Kumar, G Udaya; Suresh, S; Thansekhar, MR; Halpati, Deepkumar (2018), Role of inter-nanowire distance in metal nanowires on pool boiling heat transfer characteristics, Journal of colloid and interface science, volume: 532, page: 218-230. |
| 90 | S Salyan, S Suresh (2018), Multi-walled carbon nanotube laden with D-Mannitol as phase change material: Characterization and experimental investigation, Advanced Powder Technology, volume: 29, page: 3183-3191. |
| 91 | Pethurajan, Vignesh; Sivan, Suresh (2018), Fabrication, characterisation and heat transfer study on microencapsulation of nano-enhanced phase change material, Chemical Engineering and Processing-Process Intensification, volume: 133, page: 12-23. |
| 92 | Salyan, Srikanth; Suresh, S (2018), Multi-walled carbon nanotube laden with D-Mannitol as phase change material: characterization and experimental investigation, Advanced Powder Technology, volume: 29, page: 3183-3191. |
| 93 | Salyan, Srikanth; Suresh, S (2018), Study of thermo-physical properties and cycling stability of D-Mannitol-copper oxide nanocomposites as phase change materials, Journal of Energy Storage, volume: 15, page: 245-255. |
| 94 | Pethurajan, Vignesh; Sivan, Suresh (2018), Experimental study of an organic rankine cycle using n-hexane as the working fluid and a radial turbine expander, Inventions, volume: 03, page: 31 |
| 95 | Venkitaraj, KP; Suresh, S; Venugopal, Arjun (2018), Experimental study on the thermal performance of nano enhanced pentaerythritol in IC engine exhaust heat recovery application,Applied Thermal Engineering, volume: 137, page: 461-474. |
| 96 | Krishnan, D Venkata; Kumar, G Udaya; Suresh, S; Thansekhar, MR; Iqbal, Uzair (2018), Evaluating the scale effects of metal nanowire coatings on the thermal performance of miniature loop heat pipe, Applied Thermal Engineering, volume: 133, page: 727-738. |
| 97 | Arulprakasajothi, Mahalingam; Elangovan, Kariappan; Chandrasekhar, Udayagiri; Suresh, Sivan (2018), Performance study of conical strip inserts in tube heat exchanger using water based titanium oxide nanofluid, Thermal Science, volume: 22, page: 477-485. |
| 98 | Karthick, Krishnadass; Joy, Grashin C; Suresh, S; Dhanuskodi, R (2018), Impact of thermal interface materials for thermoelectric generator systems, Journal of Electronic Materials, volume: 47, page: 5763-5772. |
| 99 | Arulprakasajothi, M; Elangovan, K; Chandrasekhar, U; Suresh, S (2018), Experimental studies of water-based titanium oxide nanofluid in a circular pipe under transition flow with conical strip inserts, Heat Transfer Research, volume: 49, page: 439-456. |
| 100 | Krishnan, R Ajith; Balasubramanian, KR; Suresh, S (2018), Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel, International Journal of Heat and Mass Transfer, volume: 120, page: 1341-1357. |
| 101 | Kumar, Ganesan Udaya; Soni, Khushboo; Suresh, Sivan; Ghosh, Kaushik; Thansekhar, MR; Babu, P Dinesh (2018), Modified surfaces using seamless graphene/carbon nanotubes based nanostructures for enhancing pool boiling heat transfer, Experimental thermal and fluid science, volume: 96, page: 493-506. |
| 102 | Salyan, Srikanth; Suresh, S; Reddy, A Sarath (2018), Low melt alloy enhanced solid-liquid phase change organic sugar alcohol for solar thermal energy storage, Journal of Molecular Liquids, volume: 266, page: 29-42. |
| 103 | Balasubramanian, KR; Krishnan, R Ajith; Suresh, S (2018), Transient flow boiling performance and critical heat flux evaluation of Al2O3-water nanofluid in parallel microchannels, Journal of Nanofluids, volume: 07, page: 1035-1044. |
| 104 | Anbu, S; Venkatachalapathy, S; Suresh, S (2018), Heat transfer and pressure drop studies of TiO 2/DI water nanofluids in helically corrugated tubes using spiraled rod inserts, Heat and Mass Transfer, volume: 54, page:: 1301-1311. |
| 105 | Balasubramanian, KR; Krishnan, R Ajith; Suresh, S (2018), Spatial orientation effects on flow boiling performances in open microchannels heat sink configuration under a wide range of mass fluxes, Experimental Thermal and Fluid Science, volume: 99, page: 392-406. |
| 106 | Rathnakumar, P; Iqbal, S Mohamed; Michael, Jee Joe; Suresh, S (2018), Study on performance enhancement factors in turbulent flow of CNT/water nanofluid through a tube fitted with helical screw louvered rod inserts, Chemical Engineering and Processing-Process Intensification, volume: 127, page: 103-110. |
| 107 | Suresh, S; Salyan, Srikanth (2018), Solar Thermal Energy Storage Using Graphene Nanoplatelets-Added Phase Change Materials, Applications of Solar Energy, page: 187-205. |
| 108 | Venkitaraj, KP; Suresh, S; Mathew, T Alwin; Bibin, BS; Abraham, Jisa (2018), An experimental investigation on heat transfer enhancement in the laminar flow of water/TiO2 nanofluid through a tube heat exchanger fitted with modified butterfly, Heat and Mass Transfer, volume: 54, page: 813-829. |
| 109 | Kumar, CS Sujith; Kumar, G Udaya; Arenales, Mario R Mata; Hsu, Chin-Chi; Suresh, S; Chen, Ping-Hei (2018), Elucidating the mechanisms behind the boiling heat transfer enhancement using nano-structured surface coatings, Applied Thermal Engineering, volume: 137, page: 868-891. |
| 110 | Dominic, A; Sarangan, J; Suresh, S; Devahdhanush, VS (2017), An experimental study of heat transfer and pressure drop characteristics of divergent wavy minichannels using nanofluids, Heat and Mass Transfer, volume: 53, page: 959-971. |
| 111 | Hameed, M Shahul; Suresh, S (2017), Convective Heat Transfer and Pressure Drop Characteristics of Al2O3-CNT/Water Hybrid Nanofluid in Straight Circular Tube Under Turbulent Flow, Journal of Nanofluids, volume: 06, page: 743-750. |
| 112 | Kumar, Udaya; Suresh, S; Thansekhar, MR; Babu, Dinesh (2017), Effect of diameter of metal nanowires on pool boiling heat transfer with FC-72, Applied Surface Science, volume: 423, page: 509-520. |
| 113 | Venkitaraj, KP; Suresh, S (2017), Experimental study on thermal and chemical stability of pentaerythritol blended with low melting alloy as possible PCM for latent heat storage, Experimental Thermal and Fluid Science, volume: 88, page: 73-87. |
| 114 | Singh, DK; Suresh, S; Singh, H (2017), Graphene nanoplatelets enhanced myo-inositol for solar thermal energy storage, Thermal Science and Engineering Progress, volume: 02, page: 1-7. |
| 115 | B.A.J. Rose, H. Singh, N. Verma, S. Tassou, S. Suresh, N. Anantharaman, D. Mariotti; P. Maguire (2017) Investigations into nanofluids as direct solar radiation collectors. Solar Energy, volume 147, page 426-431 |
| 116 | Durgesh Singh,H. Singh,S. Suresh, B.A.J Rose, S. Tassou, N. Anantharaman (2017) MyoInositiol based nano PCM for solar thermal energy storage. Applied Thermal Engineering, volume 110, page 564-572 |
| 117 | R. Ajith Krishnan, K.R. Balasubramanian, S. Suresh (2017) The effect of heating area orientation on flow boiling performance in microchannels heat sink under subcooled condition. International Journal of Heat and Mass Transfer, volume 110, page 276-293 |
| 118 | ManoopMuraleedharan, H. Singh, S. Suresh, M. Udayakumar (2016) Directly absorbing Therminol-Al2O3Nano heat transfer fluid for linear solar concentrating collectors. Solar Energy, volume 137, page 134-142 |
| 119 | A Dominic, J Sarangan, S Suresh, VS Devahdhanush (2016) An experimental study of heat transfer and pressure drop characteristics of divergent wavy minichannels using nanofluids. Heat and Mass Transfer Springer, volume 53, page 959-971 |
| 120 | SR Chitra, S Sendhilnathan, S Suresh (2016) Investigation of heat transfer characteristics of MgMnNi/DIW-based nanofluids for quenching in industrial applications. Journal of Enhanced Heat Transfer, volume 22, page 1-8 |
| 121 | M Arulprakasajothi, K Elangovan, KHC Reddy, S Suresh (Proceedings) Heat Transfer Study of Water-based Nanofluids Containing Titanium Oxide Nanoparticles. Materials Today, volume 2(4), page 3648-3655 |
| 122 | M Arulprakasajothi, K Elangovan, KHC Reddy, S Suresh (2016) Experimental investigation on heat transfer effect of conical strip inserts in a circular tube under laminar flow. Frontiers in Energy, page 1-7 |
| 123 | Dharmendra M, Sivan Suresh, Sujith Kumar C.S., Qiaoqin Yang, Pool boiling heat transfer enhancement using vertically aligned CNT coating on a copper substrate. Applied Thermal Engineering, volume 99, page 61-71 |
| 124 | AS Praveen, J Sarangan, S Suresh, BH Channabasappa (2016) Optimization and erosion wear response of NiCrSiB/WC–Co HVOF coating using Taguchi method. Ceramics International, volume 42(1), page 1094-1104 |
| 125 | CSS Kumar, S Suresh, AS Praveen, MCS Kumar, V Gopi (2016) Effect of surfactant addition on hydrophilicity of ZnO–Al2O3 composite and enhancement of flow boiling heat transfer. Experimental Thermal and Fluid Science, volume 70, page 325-334 |
| 126 | AyyappanSusila Praveen, J Sarangan, S Suresh, J Siva Subramanian (2015) Erosion wear behaviour of plasma sprayed NiCrSiB/Al2O3 composite coating. International Journal of Refractory Metals and Hard Materials, volume 52, page 209-218 |
| 127 | A Dominic, J Sarangan, S Suresh, VS DevahDhanush (2015) An Experimental Investigation of Wavy and Straight Minichannel Heat Sinks Using Water and Nanofluids. Journal of Thermal Science and Engineering Applications, volume 7(3), page 031012 |
| 128 | M Satheeshkumar, MR Thansekhar, C Anbumeenakshi, S Suresh (2015) Effect of Geometrical Parameters on Flow Mal-Distribution in a Wavy Microchannel. Applied Mechanics and Materials,volume 813, page 674-678 |
| 129 | S Venkatachalapathy, G Kumaresan, S Suresh (2015) Performance analysis of cylindrical heat pipe using nanofluids–An experimental study. International Journal of Multiphase Flow, volume 72, page 188-197 |
| 130 | Sujith Kumar, S Suresh, CR Aneesh, Santhosh Kumar, AS Praveen, K Raji (2015) Flow boiling heat transfer enhancement on copper surface using Fe doped Al2O3–TiO2 composite coatings. Applied Surface Science, volume 334, page 102-109 |
| 131 | M Arulprakasajothi, S Suresh, K Elangovan, K Hemachandra (2015) Experimental Study of Preparation, Characterization and Thermal Behavior of Water-based Nanofluids. Applied Mechanics & Materials, volume 766-767, page 348-354 |
| 132 | S Kumar, S Suresh, Q Yang, CR Aneesh (2014) An experimental investigation on flow boiling heat transfer enhancement using spray pyrolysed alumina porous coatings. Applied Thermal Engineering, volume 71, page 508-518 |
| 133 | S Kumar, S Suresh, L Yang, Q Yang, S Aravind (2014) Flow boiling heat transfer enhancement using carbon nanotube coatings. Applied Thermal Engineering, volume 65(1), page 166-175 |
| 134 | SP Jesumathy, M Udayakumar, S Suresh, S Jegadheeswaran (2014) An experimental study on heat transfer characteristics of paraffin wax in horizontal double pipe heat latent heat storage unit, Journal of the Taiwan Institute of Chemical Engineers, volume 45, page 1298-1304 |
| 135 | S. Selvam, P. Thiyagarajan, S. Suresh (2014) Experimental studies on effect of bonding the twisted tape with pins to the inner surface of the circular tube. Thermal Science, volume 18(4), page 1273-1283 |
| 136 | A Dominic, J Sarangan, S Suresh, VS DevahDhanush (2014) An Experimental Study of Forced Convective Fluid Flow in Divergent Minichannels Using Nanofluids. Applied Mechanics and Materials, volume 592, page 1418-1422 |
| 137 | K Karunamurthy, K Mohankumar, S Suresh (2014) Performance analysis of an in-pond heat exchanger of a salt gradient solar pond. Applied Solar Energy, volume 50(2), page 84-89 |
| 138 | A Dominic, J Sarangan, S Suresh, M Sai (2014) Heat Transfer Performance of Al2O3/Water Nanofluids in a Mini Channel Heat Sink. J NanosciNanotechnol, volume 14, page 2368-2376 |
| 139 | S Suresh, KP Venkitaraj, MS Hameed, J Sarangan (2014) Turbulent Heat Transfer and Pressure Drop Characteristics of Dilute Water Based Al2O3–Cu Hybrid Nanofluids. J NanosciNanotechnol, volume 14, page 2563-2572 |
| 140 | P Selvakumar, S Suresh (2014) Thermal Performance of Ethylene Glycol Based Nanofluids in an Electronic Heat Sink. J NanosciNanotechnol, volume 14(3), page 2325-2333 |
| 141 | P Rathnakumar, K Mayilsamy, S Suresh, P Murugesan (2014) Laminar Heat Transfer and Friction Factor Characteristics of Carbon Nano Tube/Water Nanofluids. J NanosciNanotechnol, volume 14, page 2400-2407 |
| 142 | PCM Kumar, J Kumar, S Suresh (2014) Experimental investigation on convective heat transfer and pressure drop in a helically coiled tube with Al2O3/water nanofluid. Journal of Mechanical Science and Technology, volume 28(5), page 1841-1847 |
| 143 | P Selvakumar, S Suresh, S Salyan (2013) Investigations of effect of radial flow impeller type swirl generator fitted in an electronic heat sink and Al2O3/water nanofluid on heat transfer enhancement. Chemical Engineering and Processing: Process Intensification, volume 72, page 103-112 |
| 144 | S Selvam, PR Thiyagarajan, S Suresh (2013) Experimental Studies on Wire Coiled Coil Matrix Turbulators with and Without Centre Core Rod. Arabian Journal for Science and Engineering, volume 38, page 2557-2568 |
| 145 | M Chandrasekar, S Suresh, T Senthilkumar (2013) Passive cooling of standalone flat PV module with cotton wick structures. Energy Conversion and Management, volume 71, page 43-50 |
| 146 | DRS Raghuraman, PK Nagarajan, S Suresh (2013) Thermal Performance of Higher Aspect Ratio Microchannels Using TiO2-Water Nanofluids. Journal of Nanoscience and Nanotechnology, volume 13(4), page 2842-2846 |
| 147 | P Selvaraj, J Sarangan, S Suresh (2013) CFD analysis on heat transfer and friction factor characteristics of a turbulent flow for internally grooved tubes. Thermal Science, volume 17(4), page1125-1137 |
| 148 | P Rathnakumar, K Mayilsamy, S Suresh, P Murugesan (2013) Comparison of Heat Transfer and Friction Factor Characteristics of Carbon Nanotubes Based Nanofluids in a Circular Tube Fitted with Helical Screw Inserts with Spacers. Journal of Nanofluids, volume 2(4), page 274-282 |
| 149 | M Chandrasekar, S Suresh, T Senthilkumar (2013) Passive cooling of standalone flat PV module with cotton wick structures. Energy Conversion and Management, volume 71, page 43-50 |
| 150 | P Rathnakumar, K Mayilsamy, S Suresh, P Murugesan (2013) Experiments On Turbulent Heat Transfer And Friction Factor In Reaction With Carbon Nanotube Based Nanofluids. International Journal of Mechanical and Materials Engineering, volume 8(2), page 116-126 |
| 151 | K Karunamurthy, KMM Kumar, S Suresh (2012) Enhancement of Heat Transfer in Pilot Simulated Solar Ponds using Modified Tube Inserts. European Journal of Scientific Research, volume 91(1), page 165-173 |
| 152 | N Kannadasan, K Ramanathan, S Suresh (2012) Comparison of heat transfer and pressure drop in horizontal and vertical helically coiled heat exchanger with CuO/water based nano fluids. Experimental Thermal and Fluid Science, volume 42, page 64-70 |
| 153 | P Selvakumar, S Suresh (2012) Use of/Water Hybrid Nanofluid in an Electronic Heat Sink. Components, Packaging and Manufacturing Technology, volume 2(10), page 1600-1607 |
| 154 | K Karunamurthy, K. M. Mohankumar, S Suresh (2012) Use of CuO nano-material for the improvement of thermal conductivity and performance of low temperature energy. Digest Journal of Nanomaterials&Biostructures, volume 7(4), page 1833-1841 |
| 155 | M Chandrasekar, S Suresh, T Senthilkumar (2012) Mechanisms proposed through experimental investigations on thermophysical properties and forced convective heat transfer characteristics of various nanofluids–A review. Renewable and Sustainable Energy Reviews, volume 16(6), page 3917-3938 |
| 156 | P Selvakumar, S Suresh (2012) Convective performance of CuO/water nanofluid in an electronic heat sink. Experimental Thermal and Fluid Science, volume 40, page 57-63 |
| 157 | S Jesumathy, M Udayakumar, S Suresh (2012) Experimental study of enhanced heat transfer by addition of CuO nanoparticle. Heat and Mass Transfer, volume 48(6), page 965-978 |
| 158 | S Suresh, KP Venkitaraj, P Selvakumar, M Chandrasekar (2012) A comparison of thermal characteristics of Al2 O3/water and CuO/water nanofluids in transition flow through a straight circular duct fitted with helical screw tape inserts. Experimental Thermal and Fluid Science, volume 39, page 37-44 |
| 159 | S Suresh, KP Venkitaraj, P Selvakumar, M Chandrasekar (2012) Effect of Al2O3–Cu/water hybrid nanofluid in heat transfer. Experimental Thermal and Fluid Science, volume 38, page 54-60 |
| 160 | S Suresh, M Chandrasekar, P Selvakumar (2012) Experimental studies on heat transfer and friction factor characteristics of CuO/water nanofluid under laminar flow in a helically dimpled tube. Heat and Mass Transfer,volume 48(4), page 683-694 |
| 161 | S Suresh, P Selvakumar, M Chandrasekar, VS Raman (2012) Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid under turbulent flow. Chemical Engineering and Processing, volume 53, page 24-30 |
| 162 | SP Jesumathy, M Udayakumar, S Suresh (2012) Heat transfer characteristics in latent heat storage system using paraffin wax. Journal of mechanical science and technology, volume 26(3), page 959-965 |
| 163 | PCM Kumar, J Kumar, S Suresh, KP Babu (2012) Heat Transfer Enhancement in a Helically Coiled Tube with Al2O3/WATER Nanofluid Under Laminar Flow Condition. International Journal of Nanoscience, volume 11(05) |
| 164 | M Raja, RM Arunachalam, S Suresh (2012) Experimental studies on heat transfer of alumina/water nanofluid in a shell and tube heat exchanger with wire coil insert. International Journal of Mechanical and Materials Engineering, volume 7(1), page 16-23 |
| 165 | P Murugesan, K Mayilsamy, S Suresh (2012) Heat Transfer in a Tube Fitted with Vertical and Horizontal Wing-Cut Twisted Tapes. Experimental Heat Transfer, volume 25(1), page 30-47 |
| 166 | S Selvam, P Thiyagarajan, S Suresh (2012) Effect of wire coiled coil matrix turbulators with and without bonding on the wall of the test section of concentric tube heat exchanger. Thermal Science, volume 16(5), page 1151-1164 |
| 167 | S Suresh, M Chandrasekar, P Selvakumar (2012) Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid under laminar flow with spiraled rod inserts. International Journal of Nanoparticles, volume 5(1), page 37-55 |
| 168 | SP Jesumathy, M Udayakumar, S Suresh (2012) Thermal characteristics in latent heat energy storage system using paraffin wax. International Journal of EnergyTechnology and Policy, volume 8(1), page 50-64 |
| 169 | V Mariappan, M Udayakumar, PL Shrestha, S Suresh (2012) Thermodynamic Analysis Of R134a–Dmac Vapor Absorption Refrigeration (Var) stem. International Journal of Computational Engineering Research, volume 2 |
| 170 | PC Mukesh Kumar, J Kumar, S Suresh (2012) Heat transfer and friction factor studies in helically coiled tube using Al2O3/water Nanofluid. European Journal of Scientific Research, volume 82(2), page 161-172 |
| 171 | M. Chandrasekar, S. Suresh (2012) Measurement of Thermal Conductivity And Viscosity of Al2O3/Water Nanofluid to Assess Its Merit as Enhanced Coolant. Nano Trends: A Journal of Nanotechnology and Its Applications, volume 12, page 11-27 |
| 172 | Mukesh Kumar .P.C,Kumar.J. Suresh .S. Praveen babu .K (2012) Experimental study on parallel and counter flow configuration of a shell and helically coiled tube heat exchanger using Al2O3 / water nanofluid. Materials and Environmental Sciences, volume 3(4), page 766-775 |
| 173 | P. C. Mukesh Kumar, J. Kumar, S. Suresh (2012) Review on nanofluid theoretical viscosity Models. International Journal of Engineering Innovation & Research, volume 1(2), page 182-188 |
| 174 | S. Selvam, PR. Thiyagarajan, S. Suresh (2012) Effect of wire coiled coil matrix turbulators with and without bonding on the wall of the test section of concentric tube heat exchanger. Thermal Science, volume 16(4), page 1151-1164 |
| 175 | S Suresh, KP Venkitaraj, P Selvakumar, M Chandrasekar (2011) Synthesis of Al2O3–Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, volume 388, page 41-48 |
| 176 | S Suresh, KP Venkitaraj, P Selvakumar (2011) Comparative study on thermal performance of helical screw tape inserts in laminar flow using Al2O3/water and CuO/water nanofluids. Superlattices and Microstructures, volume 49(6), page 608-622 |
| 177 | M Chandrasekar, S Suresh (2011) Experiments to Explore the Mechanisms of Heat Transfer in Nanocrystalline Alumina/Water Nanofluid under Laminar and Turbulent Flow Conditions. Experimental Heat Transfer, volume 24(3), page 234-256 |
| 178 | S Suresh, M Chandrasekar, S Chandra Sekhar (2011) Experimental studies on heat transfer and friction factor characteristics of CuO/water nanofluid under turbulent flow in a helically dimpled tube. Experimental Thermal and Fluid Science, volume 35(3), page 542-549 |
| 179 | P Murugesan, K Mayilsamy, S Suresh (2011) Heat Transfer and Friction Factor in a Tube Equipped with U-cut Twisted Tape Insert. Jordan Journal of Mechanical and Industrial Engineering, volume 5(6), page 559-565 |
| 180 | S Suresh, KP Venkitaraj, P Selvakumar (2011) Synthesis, Characterisation of Al2O3-Cu Nano Composite Powder and Water Based Nanofluids. Advanced Materials Research, volume 328, page 1560-1567 |
| 181 | M Chandrasekar, S Suresh, AC Bose (2011) Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under transition flow with wire coil inserts. Heat Transfer Engineering, volume 32(6), page 485-496 |
| 182 | P Murugesan, K Mayilsamy, S Suresh, PSS Srinivasan (2011) Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert. International Communications in Heat and Mass Transfer, volume 38(3), page 329-334 |
| 183 | P Murugesan, K Mayilsamy, S Suresh (2011) Heat transfer in tubes fitted with trapezoidal-cut and plain twisted tape inserts. Chemical Engineering Communications, volume 198(7), page 886-904 |
| 184 | P Selvaraj, J Sarangan, S Suresh (2011) Experimental investigation on heat transfer and friction factor characteristics of a water and ethylene glycol mixture flow of internally grooved tubes. International Journal of Chemical Research, volume 3(1), page 33-40 |
| 185 | MukeshKumar.P.C., Kumar J., Suresh S. (2011) Thermal conductivity model for nanofluid based on static and modified Brownian motion model Elixir. Thermal Engineering, volume 33, page 2287-2290 |
| 186 | P Murugesan, K Mayilsamy, S Suresh (2010) Heat transfer and friction factor studies in a circular tube fitted with twisted tape consisting of wire-nails. Chinese Journal of Chemical Engineering, volume 18(6), page 1038-1042 |
| 187 | P Murugesan, K Mayilsamy, S Suresh (2010) Turbulent heat transfer and pressure drop in tube fitted with square-cut twisted tape. Chinese Journal of Chemical Engineering, volume 18(4), page 609-617 |
| 188 | P Selvaraj, J Sarangan, S Suresh (2010) Experimental Investigations and Numerical Analysis on Heat Transfer and Friction Factor Characteristics of a Laminar Flow for Internally Grooved Tubes, Applied Engineering Research, volume 5(15) |
| 189 | M Chandrasekar, S Suresh, A Chandra Bose (2010) Experimental studies on heat transfer and friction factor characteristics of Al2 O3water nanofluid in a circular pipe under laminar flow withwire coil inserts. Experimental Thermal and Fluid Science, volume 34(2), page 122-130 |
| 190 | M Chandrasekar, S Suresh, A Chandra Bose (2010) Experimental investigations and theoretical determination of thermal conductivity and viscosity of Al2 O3/water nanofluid. Experimental Thermal and Fluid Science, volume 34(2), page 210-216 |
| 191 | Mukesh Kumar .P.C., Kumar .J., Suresh.S (2010) Theoretical model to determine the Thermal conductivity of nanofluids. International Journal of Engineering Science and Technology, volume 2, page 2846-2852 |
| 192 | Chandrasekar, M., and S. Suresh (2010) Limits for thermal conductivity of nanofluids. ThermalScience, volume 14, page65-71 |
| 193 | Daniel Sagayaraj, T. A., Suresh, S., Sandeep (2010) Erosion Analysis of Strain Hardened Bent-Tubes of Carbon Steel Economizer of Power Boilers by Fly Ash Particles. International Journal of Material Science, volume 5(4), page 511-522 |
| 194 | Chandrasekar, S. Suresh and A. Chandra Bose (2010) Factorial Design to Investigate Various Factors Affecting the Grain Size of snO2 Nanoparticles. International Journal of Nanomaterials and Technology, volume 1, page 100-113 |
| 195 | M Chandrasekar, S Suresh (2009) Determination of Heat Transport Mechanism in Aqueous Nanofluids Using Regime Diagram. Chinese Physics Letters, volume 26(12), page 124401 |
| 196 | P Murugesan, K Mayilsamy, S Suresh (2009) Heat Transfer and Pressure Drop Characteristics of Laminar Flow in a Double Pipe Heat Exchanger Fitted with and without full length Twisted tape Insert. Heat transfer, page 201-205 |
| 197 | M Chandrasekar, S Suresh (2009) A review on the mechanisms of heat transport in nanofluids. Heat Transfer Engineering, volume 30(14), page 1136-1150 |
| 198 | TA Sagayaraj, S Suresh, M Chandrasekar (2009) Experimental studies on the erosion rate of different heat treated carbon steel economiser tubes of power boilers by fly ash particles. International Journal of Minerals, Metallurgy and Materials, volume 16(5), page 534-539 |
| 199 | S Jaisankar, TK Radhakrishnan, KN Sheeba, S Suresh (2009) Experimental investigation of heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of Left–Right twisted tapes. Energy Conversion and Management, volume 50, page 2638-2649 |
| 200 | P Murugesan, K Mayilsamy, S Suresh, PSS Srinivasan (2009) Heat transfer and pressure drop characteristics of turbulent flow in a tube fitted with trapezoidal-cut twisted tape insert. International journal of academic research, volume 1(1), page 401-407 |
| 201 | TA Sagayaraj, S Suresh, M Chandrasekar (2009) Experimental Studies on Erosion Rate of Carbon Steel Economizer Tubes of Power Boilers by Fly Ash Particles. International Journal of Materials Science, volume 4(2), page 110-115 |
| 202 | M Chandrasekar, S Suresh, R Srinivasan, AC Bose (2009) New analytical models to investigate thermal conductivity of nanofluids. Journal of nanoscience and nanotechnology, volume 9(1), page 533-538 |
| 203 | Mukesh Kumar .P.C., Kumar .J., Suresh .S (2009) Experimental investigation on the Overall heat transfer coefficient of a double pipe parallel flow heat Exchanger using Al2O3Nanofluids. Journal of Nanotechnology and its Applications, volume 7(2), page 17-23 |
| 204 | Chandrasekar. M.S. Suresh (2009) Lower and upper bounds for thermal conductivity of nanofluids. Nano trends, volume 7(1), page 12-18 |
| 205 | P. Murugesan, K. Mayilsamy, S. Suresh (2009) Heat transfer and pressure drop characteristics of laminar flow in a tube fitted with trapezoidal –cut twisted tape insert. Int. journal of Emerging Technologies and applications in Engineering, volume 3, page 780-784 |
| 206 | P Sivashanmugam, PK Nagarajan, S Suresh (2008) Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with right and left helical screw-tape inserts. Chemical Engineering Communications, volume 195(8), page 977-987 |
| 207 | P Sivashanmugam, S Suresh (2007) Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts. Applied Thermal Engineering, volume 27(8), page 1311-1319 |
| 208 | P Sivashanmugam, S Suresh (2007) Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with regularly spaced helical screw-tape inserts. Experimental thermal and fluid science, volume 31(4), page 301-308 |
| 209 | Sivashanmugam, P and S Suresh (2007) Experimental studies on heat transfer and friction factor characteristics in turbulent flow through a circular tube fitted with helical screw-tape inserts. Chemical Engineering and Processing: Process Intensification, volume 46(12), page 1292-1298 |
| 210 | P Sivashanmugam, S Suresh (2006) Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts. Applied Thermal Engineering, volume 26(16), page 1990-1997 |
