Journals published by Mr. V. Anandakrishnan
|
S# |
Title |
Author(s) |
Journal |
Year |
|
Vol. (No), Page |
||||
|
1. |
Effect of geometric work-hardening and matrix work-hardening on new constitutive relationship for aluminium–alumina P/M composite during cold upsetting |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
International Journal of Mechanics and Materials in Design |
Volume 4, Number 3/ September, 2008, Pages 301–315. |
|
2. |
Effect of carbon content on workability of powder metallurgy steels |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
Materials Science and Engineering A |
Volume 494, Issues 1-2, October 2008, Pages 337-342. |
|
3. |
Some aspects on plastic deformation of copper and copper–titanium carbide powder metallurgy composite preforms during cold upsetting |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
International Journal of Material Forming |
Volume 1, Number 4, December, 2008. |
|
4. |
Effect of carbon content on instantaneous strain-hardening behaviour of powder metallurgy steels |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
Materials Science and Engineering |
Volume 497, Issues 1-2, 15 December 2008, Pages 505-511. |
|
5. |
Effect of geometric work-hardening and matrix work-hardening on workability and densification of aluminium-3.5% alumina composite during cold upsetting |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
Materials & Design |
Volume 29, Issue 8, 2008, Pages 1582-1599. |
|
6. |
Comparison of workability strain and stress parameters of powder metallurgy steels AISI 9840 and AISI 9845 during cold upsetting |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
Materials & Design |
Volume 29, Issue 10, December 2008, Pages 1919-1925. |
|
7. |
Effect of molybdenum addition on workability of powder metallurgy steels during cold upsetting |
R.Narayanasamy, V.Anandakrishnan, K.S.Pandey |
Materials Science and Engineering |
Volume 517, Issues 1-2, 20 August 2009, Pages 30-36. |
|
Multi-Response Optimization of turning Parameters of AL-6061-TIB2 in-situ metal Matrix Composite using Grey-Taguchi Method |
A.Mahamani, V.Anandakrishnan |
International eJournal of Mathematics and Engineering |
Volume 1, 2010, Issue 2, Pages 246-255. |
|
|
9. |
Investigations of flank wear, cutting force, and surface roughness in the machining of Al-6061–TiB2 in situ metal matrix composites produced by flux-assisted synthesis |
V.Anandakrishnan, A.Mahamani |
The International Journal of Advanced Manufacturing Technology |
Volume 55, 2011, Numbers 1-4, Pages 65-73. |
|
10. |
Determination of optimum parameters for multi-performance characteristic in turning of Al-6061-6%ZrB2 in-situ metal matrix composite using grey relational analysis |
A.Mahamani, N.Muthukrishnan, V.Anandakrishnan |
International Journal of Manufacturing, Materials, and Mechanical Engineering |
Volume 2, Issue 1, January-March 2012, Pages 11-30. |
|
11. |
Comparison of high temperature wear behaviour of plasma sprayed WC–Co coated and hard chromium plated AISI 304 austenitic stainless steel |
G.M.Balamurugan, Muthukannan Duraiselvam, V.Anandakrishnan |
Materials & Design |
Volume 35, March 2012, Pages 640-646. |
|
12. |
Effect of sintering temperature and time intervals on workability behaviour of Al–SiC matrix P/M composite |
J.Bensam Raj, P.Marimuthu, M.Prabhakar, V.Anandakrishnan |
The International Journal of Advanced Manufacturing Technology |
Volume 61, July 2012, Issue 1-4, Pages 237-252, DOI 10.1007/s00170-011-3709-4. |
|
13. |
Mathematical Modeling of Machining Parameters in Electrical Discharge Machining with Cu-B4C Composite Electrode |
V.Anandakrishnan, V.Senthilkumar |
Advanced Materials Research |
Volume 488-489, 2012, Pages 871-75. |
|
14. |
Synthesis and Forming Behaviour of AA 7075–TiC Metal Matrix Composites |
V.Anandakrishnan, S.Baskaran, S.Sathish |
Advanced Materials Research |
Volume 651, 2013, Pages 251 – 56. |
|
15. |
Effect of Sintering Temperature on the Formability and Pore Closure Behavior of Al-SiC Composites |
J.Bensam Raj, P.Marimuthu, M.Prabhakar, V.Anandakrishnan |
Applied Mechanics and Materials |
Volume 392, 2013, Pages 24-30. |
|
16. |
Workability Behavior of Al-SiC Matrix P/M Composites Under Triaxial Stress State Condition |
J.Bensam Raj, P.Marimuthu, M.Prabhakar, V.Anandakrishnan |
International Review of Mechanical Engineering |
Volume 7(5), 2013, Pages 947- 954. |
|
17. |
An ANN approach for predicting the cutting inserts performances of different geometries in hard turning |
N.Senthilkumar, T.Tamizharasan, V.Anandakrishnan |
Advances in Production Engineering & Management |
Volume 8 (4), 2013, Pages 231–241. |
|
18. |
Multi-Objective Optimization of Upsetting Parameters of Al-TiC Metal Matrix Composites A Grey-Taguchi approach |
Mohit Sahu, A.Valarmathi, S.Baskaran, V.Anandakrishnan, Rupesh Pandey |
Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, |
February 25, 2014, Pages 1-7.(0.661) doi:10.1177/0954405413519434 |
|
19. |
Synthesis and forming behavior of aluminium-based hybrid powder metallurgic composites |
M.Ravichandran, A.Naveen Sait, V.Anandakrishnan |
International Journal of Mineral, Materials and Metallurgy |
Volume 21, Number 2, February 2014, Pages 181-189 (0.483). |
|
20. |
Effect of TiO2 in Aluminium Matrix on Workability Behavior of Powder Metallurgy Composites during Cold Upsetting |
M.Ravichandran, A.Naveen Sait, V.Anandakrishnan |
International Journal of Materials Research |
Volume 105, Issue 4, Pages 358-364 (0.83). |
|
21. |
Al–TiO2–Gr powder metallurgy hybrid composites with cold upset forging |
M.Ravichandran, A.Naveen Sait, V.Anandakrishnan |
Rare Metals |
Volume 1, Issue 11 (0.493). |
|
22. |
Densification and deformation studies on sintered powder metallurgy aluminium hybrid composite |
M.Ravichandran, A.Naveen Sait, V.Anandakrishnan |
Journal of Materials Research |
Volume 29, Number 13, 2014, Pages 1-8 (1.713). |
|
23. |
Taguchi grey relational analysis of dry sliding wear behaviour of annealed AA7075-TiC metal matrix composites |
S.Baskaran, V.Anandakrishnan, Muthukannan Duraiselvam, S.Raghuraman, V.M. Illayaraja Muthaiyaa |
Applied Mechanics and Materials |
Volume. 541-542, 2014, Pages 258-262. |
|
24. |
Effect of heat treatment on wear behavior of hot extruded AA7075 - 4%TiC in-situ metal matrix composite |
S.Baskaran, B.M.Muthamizh Selvan, V.Anandakrishnan, R.Venkatraman, Muthukannan Duraiselvam |
Applied Mechanics and Materials |
Volume. 541-542, 2014, Pages 263-267. |
|
25. |
Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano-composites |
B.Selvam, P.Marimuthu, R.Narayanasamy, V.Anandakrishnan, K.S.Tun, M.Gupta, M.Kamaraj |
Materials and Design |
Volume 58, June 2014, Pages 47–481 |
|
26. |
Investigations on dry sliding wear behavior of in-situ casted AA7075-TiC metal matrix composites by using Taguchi technique |
S.Baskaran, V.Anandakrishnan, Muthukannan Duraiselvam |
Manuscript Accepted, Materials and Design |
Volume 60, August 2014, Pages 184-192. |
|
27. |
Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance |
I.Arun, P.Vaishnavi, M.Duraiselvam, V.Senthilkumar, V.Anandakrishnan |
International Journal of Materials Research |
Volume 105, Issue 6, 2014, Pages 544-551 (0.83). |
|
28. |
Synthesis and Characterization of Al7075, Al7075-10 Vol.% Al2O3 Composite Prepared by High-Energy Ball Milling |
C.Raja, R.Devi, S.Sivaprakash, V.Anandakrishnan |
Applied Mechanics and Materials |
Volume 592, 2014, Pages 755-759. |
|
29. |
Synthesis of Al7075 Alloy/Al2O3 Composite and Corrosion Study |
R.Devi, C.Raja, S.Sivaprakash, V.Anandakrishnan |
Advanced Materials Research |
Volume 954, 2014, Pages 541-545. |
|
30. |
Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies |
Ilangovan Arun, Muthukannan Duraiselvam, V.Senthilkumar, R.Narayanasamy, V. Anandakrishnan |
Materials and Design |
Volume 63, November 2014, Pages 257–262. |
|
31. |
Experimental investigation and performance analysis of cemented carbide inserts of different geometries using taguchi based grey relational analysis |
N.Senthilkumar, T.Tamizharasan, V.Anandakrishnan |
Measurement |
|
|
32. |
An Hybrid Taguchi-Grey Relational Technique and Cuckoo Search Algorithm for Multi-Criteria Optimization in Hard Turning of AISI D3 Steel |
N.Senthilkumar, T.Tamizharasan, V.Anandakrishnan |
Journal of Advanced Engineering Research, |
Volume 1, Issue 1, 2014, Pages 16-31. |
|
33. |
The effects of various reinforcements on dry sliding wear behaviour of AA 6061 nanocomposites |
D.Jeyasimman, R.Narayanasamy, R.Ponalagusamy, V.Anandakrishnan, M.Kamaraj |
Materials and Design |
Volume 64, November 2014 Pages 783–793. |
|
34. |
Workability Studies on Al+2.5%TiO2 +Gr Powder Metallurgy Composites During Cold Upsetting |
Manickam Ravichandran, Abdullah Naveen Sait, Veeramani Anandakrishnan |
Materials Research |
Volume 17, Issue 6, 2014, Pages 1489-1496. |
|
35. |
Hot Upset Forging Studies on Al-2.5%-TiO2-C Hybrid Powder Metallurgy Composite |
A. Naveen Sait and V.Anandakrishnan M. Ravichandran |
Transactions of Powder Metallurgy Association of India |
Volume 40, Issue 2, 2014, Pages 43-49. |
|
36. |
Optimization of powder metallurgy parameters to attain maximum strength coefficient in Al–10 wt% MoO3 composite |
Manickam Ravichandran and Veeramani Anandakrishnan |
Journal of Materials Research |
Volume 30, 2015, Pages 2380-2387. doi 10.1557/jmr.2015.211. |
|
37. |
Synthesis and forming characteristics of Al–TiO2 powder metallurgy composites during cold upsetting under plane stress state conditions |
M. Ravichandran, A. Naveen Sait, and V. Anandakrishnan |
Journal of Sandwich Structures and Materials |
Vol. 17 no. 3, May 2015,Pages 278-294 |
|
38. |
Effect of Particulate Reinforced Aluminium Metal Matrix Composite–A Review |
C. Saravanan, K. Subramanian, V. Ananda Krishnan, and R. Sankara Narayanan |
Mechanics and Mechanical Engineering |
Volume 19, no. 1, (2015), Pages23-30. |
|
39 |
Study of characteristics of Al + 5 wt.% TiO2 + 6 wt.% Gr hybrid P/M composite powders prepared by ball milling process |
M. Ravichandran, VS. Vidhya, V. Anandakrishanan |
Physicochemical Mechanics of Materials, |
Volume 4, 2015, Pages 136-143. |
|
40 |
Optimization of welding parameters to attain maximum strength in friction stir welded AA7075 joints |
Manickam Ravichandran, Mokkaiya Thirunavukkarasu, Shanmugam Sathish and Veeramani Anandakrishnan |
Materials Testing |
Volume 58, No.3, 206-210, March 2016. |
|
41 |
Hot Upset Studies on Sintered (Al–TiO2–Gr) Powder Metallurgy Hybrid Composite |
M Ravichandran, V Anandakrishnan |
Strength of Materials, Springer |
Volume 48, issue 3, 450-459, May 2016. |
|
42 |
Multi-Objective Optimization Of Electric Discharge Machining Of Hybrid Copper Composite Using Taguchi Grey Relational Analysis |
R Ravikumar, K Ilayaraja, P Ranjith Kumar, Anandakrishnan Veeramani, S Sathish, M Ravichandran |
Journal of Advances in Chemistry |
Volume 13, Issue-01, Pages-5923-5928, Jan 2017
|
|
43 |
Workability behavior of hybrid copper matrix composites synthesized by powder metallurgy technique |
K Ilayaraja, P Ranjith Kumar, V Anandakrishnan, N Sathish, V Ravichandran, R Ravikumar |
Mechanics and Mechanical Engineering |
Volume 21, Issue-02, pages- 207-216, Feb 2017 |
|
44 |
Mechanical, electrical, and corrosion behavior of AA6063/TiC composites synthesized via stir casting route |
Sekar Saravanan, Palanisamy Senthilkumar, Manickam Ravichandran, Veeramani Anandakrishnan |
Journal of Materials Research |
Volume 32, Issue-03, Pages- 606-614, Feb 2017.
|
|
45 |
Accelerated Short-Term Techniques to Evaluate Corrosion in TiC Reinforced AA6063 Composites |
S Saravanan, T Palanisamy, M Ravichandran, V Anandakrishnan, S Sankar, AV Balan |
JOURNAL OF ADVANCES IN CHEMISTRY |
Volume 13, Issue-10, Pages- 5905-5913,March 2017 |
|
46 |
Synthesis, characterization and forming behavior of hybrid copper matrix composites produced using powder metallurgy |
Ilayaraja Karuppiah, Ranjith Kumar Poovaraj, Anandakrishnan Veeramani, Sathish Shanmugam, Ravichandran Manickam, Ravikumar Rangasamy |
International Journal of Materials Research |
Volume 108, Issue-07, Pages- 586-591, 2017 |
|
47 |
Recent Issues in Materials and Manufacturing |
M Ravichandran, V Anandakrishnan, Ing M Duraiselvam, Alokesh Pramanik |
Advances in Mechanical Engineering |
Volume 9, Issue-12, Pages- 1687814017743107 , Dec 2017 |
|
48 |
Investigations on electric discharge machining of copper-Al2O3-Gr powder metallurgy composites |
R Gnanasekaran, J Bensam Raj, V Anandakrishnan |
International Journal of Additive and Subtractive Materials Manufacturing |
Volume 2, Issue-01, Pages-61-73, 2018 |
|
49 |
Multi Objective Optimization of Wear Behaviour of In Situ AA8011-ZrB2 Metal Matrix Composites by Using Taguchi-Grey Analysis |
BM Selvan, V Anandakrishnan, Muthukannan Duraiselvam, Ramamoorthy Venkatraman, S Sathish |
Materials Science Forum |
Volume 928, Pages-162-167, 2018 |
|
50 |
Tribological behavior of AA7075-TiC composites by powder metallurgy |
C Saravanan, K Subramanian, V Anandakrishnan, S Sathish |
Industrial Lubrication And Tribology |
Volume 70, Issue-06, Pages- 1066-1071, 2018 |
|
51 |
Multi-objective Optimization of Cold Upsetting Parameters for Aluminium Metal Matrix Composites |
PP Shantharaman, M Prabhakar, V Anandakrishnan, S Sathish |
Transactions of the Indian Institute of Metals |
Volume 71, Issue-04, Pages-1-6, April 2018 |
|
52 |
Statistical analysis of Co-efficient of friction during dry sliding wear behaviour of TiC reinforced Aluminium Metal Matrix Composites |
S Baskaran, V Anandakrishnan |
Materials Today: Proceedings |
Volume 5, Issue-06, Pages- 14273-14280, Dec 2018 |
|
53 |
Experimental Investigation and Optimization of SiC Abrasive Water Jet Machining of Aluminium Alloys |
R. Rahul, S. Sreenivash, K. Renuka, V. Anandakrishnan S. Sathish |
International Journal of Vehicle Structures & Systems |
Volume 10, Issue-05, Pages- 337-341, 2018 |
|
54 |
Multi Objective Optimization of Wear Behaviour of In Situ AA8011-ZrB2 Metal Matrix Composites by Using Taguchi-Grey Analysis |
BM Selvan, V Anandakrishnan, Muthukannan Duraiselvam, Ramamoorthy Venkatraman, S Sathish |
Materials Science Forum |
Volume 928, Pages- 162-167, 2018 |
|
55 |
Synthesis and Forming Behaviour of AA7075-TiC Powder-Metallurgy Composites |
Saravanan Chinnaiyan, Subramanian Karuppazhagi, Anandakrishnan Veeramani, Sathish Shanmugam |
Materials and technology |
Volume 52, Issue-06, Pages- 809–812, 2018 |
|
S# |
Title |
Author(s) |
Journal |
Year Vol. (No), Page |
|
1. |
Influence of carbon content on workability of PM steels |
Dr. V. Anandakrishnan |
Transactions of PMAI, Powder Metallurgy Association of India |
Vol. 35, Pages 26 – 31, December 2009 |
