Journals

Publications:

SCI Journals

  1. J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of Flexible Manufacturing Systems using Particle Swarm Optimization Algorithm”, International Journal of Advanced Manufacturing Technology, UK, Vol.25, pp.964-971, 2005.
  2. J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani, “Simultaneous Scheduling of Parts and AGVs in an FMS using Adaptive Genetic Algorithm”, International Journal of Advanced Manufacturing Technology, UK, Vol. 29, pp. 584 – 589, 2006.
  3. A. Gnanavelbabu, A. Noorul Haq, V. Muthu Laxmi, T. Vigneswaralu,
    “Scheduling of Machines and Automated Guided Vehicles in FMS
    using Differential Evolution” International Journal of Production Research. Vol. 48, No. 16, 15 August 2010, 4683–4699.
  4. N. Rajesh Mathivanan, J. Jerald, Materials and Design, Volume 31, Issue 9, 2010, pp 4553-4560.
  5. N. Rajesh Mathivanan, J. Jerald, Puspita Behera (2011), International Journal of Advanced Manufacturing Technology, Vol 52, PP 433-441.
  6. S.P.Leo Kumar, J.Jerald, S.Kumanan, (2014) “An Intelligent Process Planning System for Micro Turn- Mill Parts”. International Journal of Production Research, Vol.52,No.40:6052-6075.
  7. S.P.Leo Kumar, J.Jerald, S.Kumanan, Aniket Nargundkar, (2014) “Process Parameters Optimization for Micro End Milling Operation for CAPP Applications”. Neural Computing and Applications, Vol.25, No.7-8:1941-1950.
  8. S.P.Leo Kumar, J.Jerald, S.Kumanan, R.Prabakaran, (2014) “Review on Current Research Aspects in Tool Based Micromachining Processes”. Materials and Manufacturing Processes.Vol.29, No.11-12:1291-1337.
  9. S.P.Leo Kumar, J.Jerald, S.Kumanan, (2014) “Feature Based Modeling and Process Parameters Selection in a CAPP system for Prismatic Micro Parts”. International Journal of Computer Integrated Manufacturing. DOI:10.1080/0951192X.20140953586 (Published Online)
  10. J Cyril, P Asokan, J Jerald, Sumit Kuar, G Kanagaraj, Experimental investigations of powder mixed micro Electrical discharge drilling on 316L Stainless Steel, Materials and Manufacturing Process, August 2016(Published Online).
  11. J. Cyril Pilgrin, P. Asokan, J. Jerald, G. Kanagaraj, J. Mukund Nilakantan, Izabela Nielsen,” Tool Speed and Polarity Effects in Micro-EDM Drilling of 316L Stainless Steel”, Production and Manufacturing Research, pp.99-117,2017.
  12. J. Cyril Pilgrin, P. Asokan, J. Jerald, G. Kanagaraj,” Effects of electrode materials on performance measures of electrical discharge micro-machining”, Materials and Manufacturing Processes, pp.1-10,2017.
  13. J. Jerald, R. Rekha, A. Palanisamy, N. Baskar, “Regression Modelling and Simulated Annealing Optimization of Cylindrical Grinding Process”, International Journal of Manufacturing Technology and Management. (Accepted).
  14. T. Venkatesan, J. Jerald, P. Asokan, “Performance analysis of cryogenically assisted high speed micro drilling of Incoloy 800 super alloy”, Materials Research Express, volume 6. DOI: 10.1088/2053-1591/ab1a0a.
  15. J. Jerald, P. Asokan, T. Venkatesan, J. Cyril Pilgrin,”Experimental Investigation on Micro Drilling of Inconel 718 Super Alloy”, International Journal of Machining and Machinability of Materials. (Accepted).
  16. A. Saravanan & J. Jerald (2020) “Ontological model-based optimal determination of geometric tolerances in an assembly using the hybridized neural network and Genetic algorithm”, Journal of Engineering Design 30: 4-5, 180-198. DOI: 10.1080/09544828.2019.1605585.
  17. Saravanan, A., Jerald, J., & Carolina Rani, A. (2020). “An explicit methodology for manufacturing cost–tolerance modeling and optimization using the neural network integrated with the genetic algorithm”. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 34(3), 430-443. doi:10.1017/S0890060420000219.
  18. A. Saravanan, J. Jerald & A. Delphin Carolina Rani (2020) “An intelligent constitutive and collaborative framework by integrating the design, inspection and testing activities using a cloud platform”, International Journal of Computer Integrated Manufacturing, 33:5, 440-459, DOI: 10.1080/0951192X.2020.1736712
  19. Sherif, S.U., Sasikumar, P., Asokan, P., Jerald, J. (2020), “Bi-objective optimisation model with societal constraints for green closed loop supply chain network – a case of battery industry”, International Journal of Productivity and Quality Management, Vol. 27, No. 3, pp. 276 – 304.
  20. Sherif, S.U., Sasikumar, P., Asokan, P., Jerald, J. (2021), “An eco-friendly closed loop supply chain network with multi-facility allocated centralized depots for bidirectional flow in a battery manufacturing industry”, Journal of Advances in Management Research, Vol. 17, No. 1, pp. 131 – 159.

Non-SCI Journals

  1. J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani,  “Simultaneous Scheduling of Parts and AGVs in an FMS using Non-Traditional Optimization Algorithms”, International Journal of Applied Management and Technology, USA, Vol.3, No.1, pp. 305- 315, 2005.
  2. J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of Parts and AS/RS in an FMS using Genetic Algorithm”, International Journal of Applied Management and Technology, USA, Vol. 4, No.1, pp.25 – 34, 2006.
  3. P. Asokan, , S. Arunachalam, T.Page, “Application of the Adaptive Genetic Algorithm and Particle Swarm Optimization in the scheduling of Jobs and AS/RS in FMS”, International Journal of Manufacturing Research. Vol. 3, No. 4, pp. 393-405, 2008.
  4. J. Jerald, A.Gnanavel Babu, A. Noorul Haq, “Multi-Objective Scheduling of Jobs, Automated Guided Vehicles and Automated Storage/Retrieval System in Flexible Manufacturing System” International Journal for Manufacturing Science & Production, Vol. 9, Nos. 1-2, 2008, pp 61–80.
  5. N. Rajesh Mathivanan, L. Sunith Babu, Ramesh. S.Sharma, “Experimental Investigation of Low-velocity Impact Characteristicsof Polyurethane Foam based Sandwich Composites”, International Journal of Mechanical Engineering, Vol. 1, No. 2, pp. 163-167, 2008.
  6. A. Gnanavel Babu, K. Narendar, A. Noorul Haq, “Simultaneous Scheduling of Machines and AGVs in FMS Environment”, Journal of Modern Manufacturing Technology, Vol 1. No. 1 pp 43 – 57, 2009.
  7. N. Rajesh Mathivanan, J. Jerald, K. Divya, International Journal of Material Sciences, 2009, vol. 4, Number 2, pp 101-114.
  8. A. Gnanavel Babu, J. Jerald, A. Noorul Haq (2009), “Scheduling of Machines and AGVs in FMS using Sheep Flock Heredity Algorithm”, International Journal of Industrial Engineering Practices Vol 1, No 2, pp 115-124.
  9.  A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Multi-objective Scheduling of Jobs, AGVs and AS/RS in FMS using Artificial Immune System” International Journal of Advances in Production Engineering and Management, No 3, Vol 4, 2009, pp 139-150.
  10. A. Gnanavel Babu, J. Jerald, A. Noorul Haq (2010), “Particle Swarm Optimization for scheduling of Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, International Journal of Materials, Manufacturing and Optimization, Vol 1, No. 1, pp 1-11.
  11. Gnanavel Babu, S.Divya, J. Jerald, A. Noorul Haq (2010) “Simultaneous Scheduling of Machines and Automated Guided Vehicles in FMS using Scatter Search’, International Journal for Production Technology and Management Research, Vol 1, No.1, pp 9-17.
  12. R. Ramesh, , Tom Page, Subramaniyam Arunachalam, “Concurrent Tolerance Allocation using an Artificial Neural Network and Continuous Ant Colony Optimization”, International Journal of Design Engg., Issue 2, Vol. 1, 2009, pp. 1-25.
  13. R. Ramesh, , “Concurrent Tolerance Allocation for Quality with Form Control using Genetic Algorithm”, International Journal of Manufacturing Research, Vol. 4, No. 4, 2009, pp. 439-457.
  14. R. Ramesh, , “Development of New Emprical Manufacturing Cost Tolerance Models”, International Journal of Materials, Manufacturing and Optimization, (Accepted for publication, 2009).
  15. J.Jerald, A.S.Radhamani, T.Merlin Leo, “
  16. J. Jerald, Saravanan D, Arul Arasu M, and Arunachalam R.M. (2010), “Experimental Investigation of Micro Electro Chemical Machining on Nickel”, International Journal of Production Technology and Management Research, Volume 1, Issue 2, , pp 67-74.
  17. N. Rajesh Mathivanan, J. Jerald (2010), The Journal of Minerals & Materials Characterization & Engineering. Vol. 9, No.7, pp.643-652.
  18. Rajesh Mathivanan, N. and J. Jerald (2011) “ International Journal of Materials, Management and Optimization, No 2, Vol 1, pp 13-18.
  19. M. S. Arun Vikram, A. Chandramouli andJ. Jerald (2011), “Scheduling Optimization of Job Schaduling Proble using Particle Swarm Optimization” , International Journal of Materials, Management and Optimization, No 2, Vol 1, 2011, pp 1-5,
  20. R.Thanigaivelan, RM.Arunachalam, J.Jerald, T.Niranjan, (2011) “”, Int. J. of Experimental Design and Process Optimisation. Vol 02, No.: 04, pp 283-297
  21. H. Rama Murthy Naik, J.Jerald and N. Rajesh Mathivanan,(2012), “
  22. Rajesh Mathivanan, N. and J. Jerald (2012), “ The Journal of Minerals & Materials Characterization & Engineering Vol 11, No 3, pp 321-333.
  23. J.Jerald, S.Kumanan, S.P.Leo Kumar, H.V. Chandrakar, (2013) “Experimental Investigation and Optimization of Process Parameters in Micro- Electric Discharge Machining, Int. J. of Manufacturing Technology and Management. No 1/2/3,Vol.27, pp 88-100.
  24. T. Venkatesan, J. Jerald, P. Asokan," Performance analysis of Temperature and MRR using high speed micro drilling on Incoloy 800 super alloy". Lecture Notes in Mechanical Engineering. (Accepted).
  25. Su. Venkatesan, J. Jerald, P. Asokan, R. Harichandran, “A study on the mechanical and corrosion behavior of bronze – TiB2 metal matrix composites”, Materials Today: Proceedings, Volume 39, Part 4, 2021, Pages 1426-1433, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.05.116.
  26. Venkatesan, S., Jerald, J., Asokan, P., Prabakaran, R. (2020). A Comprehensive Review on Microfluidics Technology and its Applications. In: Kumar, H., Jain, P. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1071-7_20.
  27. S.Senthilkumar and J.Jerald (2021),”Study the Impact of Electrical Discharge Machining Parameters on Al-Mg-Tio2 Nano Composite”, International Journal of Mechanical Engineering, Vol. 6 No. 3 December, 2021.
  28. Kiran V Sagar, J. Jerald (2022),” Real-time Automated Guided vehicles scheduling with Markov Decision Process and Double Q-Learning algorithm”, Materials Today: Proceedings, 2022,ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2022.04.522.

National Journals:

  1. K.Thangadurai, P.Satheesh, R.Saravanan, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Particle Swarm Optimization and Memetic Algorithm”, Journal of Manufacturing Technology Today, pp.11-15, Vol. 3, No. 11, 2004.
  2. J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani, “Simultaneous Scheduling of Parts and AGVs in an FMS using Genetic Algorithm”, Journal of Manufacturing Technology Today, pp.8-11, Vol. 3, No. 12, 2004.
  3. R.Ravikumar, P. Asokan,, M. Shanthi “Optimization of Parameters in Electro Chemical Machining using Non-Traditional Techniques”, ,
  4. R.C.Paul, P.Asokan, J. Jerald, “Multi objective Facility Layout Problem using Particle Swarm Optimization” Journal of Institution of Engineers (India), Vol. 89 pp 1-6, Sep 2008.

Conferences/Workshops/Symposia Proceedings:

International Conferences:  

  1. S. Muruganandam, J. Jerald, R. Saravanan, P. Asokan, “Optimization of Modern Manufacturing Systems using Genetic Algorithm (GA)”, International Conference on e-Manufacturing, Maulana Azad National Institute of Technology, Bhopal, 17-19 November 2002.
  2. J. Jerald, P. Asokan, G. Prabaharan, P. Satheesh,  “Scheduling Optimization of Flexible Manufacturing Systems using Memetic Algorithm”, International Conference on Responsive Supply Chain and Organizational Competitiveness (RSC 2004), Coimbatore Institute of Technology, Coimbatore, 5-7 January 2004.
  3. Jeganathan.K, Jerald.J, Satheesh.P,” Optimization of Tool Requirement Planning in CNC Machines” 21st All India Manufacturing Technology, Design and Research (AIMTDR), VIT Vellore, December 20-22, 2004.
  4. P. Asokan, M. Chandrasekaran, “Application of Artificial Immune System Algorithm to Minimize Total Holding Cost of Completed and In-Process Products Subject with No Tardy Jobs”,17th International Conference on Flexible Automation and Intelligent Manufacturing, The PennsylvaniaState University, Pennsylvania, USA, June 18-20, 2007.
  5. A. Gnanavel Babu, A. Noorul Haq, “Multi objective Scheduling of Jobs, AGVs and AS/RS in FMS using Sheep flock Heredity Algorithm”, International Conference on Advances in Manufacturing Technology for Young Engineers, IITM, Chennai, 6-8February, 2008.
  6. A. Gnanavel Babu, P. Prabhaharan, A. Noorul Haq, “Particle Swarm Optimization for Scheduling of Machines and AGVs in FMS”, InternationalConference on Advances in Manufacturing Technology for Young Engineers, IITM, Chennai, 6-8February, 2008.
  7. A. Gnanavel Babu, P. Prabhaharan, A. Noorul Haq, A. Noorul Haq, A. Gnanavel Babu, P. Asokan, K.Narendar, “Simultaneous Scheduling of Machines and Automated Guided Vehicles using Artificial Immune System”, The 6th International Conference on Manufacturing Research, UK, 9 – 11 September 2008.
  8. A. Gnanavel Babu, A. Noorul Haq, “Multi-objective Scheduling of Machines and Material Handling systems in FMS Environment” The 6th International Conference on Supply Chain Management and Information systems, National Institute of Technology, Tiruchirappalli, 8-10, Dec. 2008.
  9. Gnanavel Babu, A. Noorul Haq, “Artificial Immune System Based Scheduling for Machines and Material Handling Systems in FMS”, 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference, IIT Madras, Dec-2008, pp.51-57.
  10. N. Rajesh Mathivanan, Ramesh S. Sharma, “Influence of Core Density of Composite Structures subjected to Low-Velocity Impact”, International Conference on Emerging Research and Advances in Mechanical Engineering(ERA 2009), Velammal College of Engineering, Chennai, 19 – 21 March 2009.
  11. N. Rajesh Mathivanan, J. Jerald, Proc. of the International Conference on Advances in Mechanical and Building Sciences in the 3rd Millennium, Vellore Institute of Technology, Vellore, Tamil Nadu, India, 2009, pp 1171-1177.
  12. J. Jerald and A. Delphin Carolina Rani, “AS/RS Scheduling in an FMS using Adaptive Genetic Algorithm” XIV Annual International Conference of the Society of Operations Management 17-19, December 2010,  National Institute of Industrial Engineering (NITIE), Mumbai
  13. Rajesh Mathivanan, N. and J. Jerald, “Proc. of the First International Conference on Composites and Nano-composites, MG University, Kottayam, Kerala, India, 7-9, January 2011, pp146.
  14. J. Jerald, M. S. Arun Vikram and A. Chandramouli, “An Efficient Swarm Optimizer for Job S hop Scheduling Problem”Second International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6-8, June 2011, Universiti Tun Hussein Onn Malaysia (UTHM).
  15. S.P.Leo Kumar, J.Jerald and S.Kumanan, “An Expert System for Cutting Tool Selection for Micromachining Processes”,Proceedings of International Conference on Precision,Meso,Micro and Nano Engineering(COPEN-8),13-15,December2013,NITC.
  16. Lohithaksha M Maiyar, R. Ramanujam, K. Venkatesan, J. Jerald (2013), “ Optimization of Machining Parameters for End Milling of Inconel 718 Super alloy using Taguchi based Grey Relational Analysis”, Procedia Engineering(Elsevier), Vol 64, pp 1276-1282
  17. S.P.Leo Kumar, J.Jerald and S.Kumanan (2014) “Automatic Feature Extraction and CNC Code Generation in a CAPP System for MIcromachining”, International Conference on Advances in Manufacturing and Materials Engineering, National Institute of Technology Tiruchirappalli, 20-21 February 2015.
  18. S.P.Leo Kumar, J.Jerald and S.Kumanan (2014) “Automatic Feature Extraction and CNC Code Generation in a CAPP System for Micromachining”, International Conference on Advances in Materials and Manufacturing Engineering (ICAMME-14), 13-15 March 2014, National Institute of Technology Surathkal
  19. S.P.Leo Kumar, J.Jerald and S.Kumanan (2015) “Mathematical Modelling of Micro End Milling Process and Establishing Parameters to Develop a CAPP System”, Proceedings of the International Conference on Advances in Production and Industrial Engineering, National Institute of Technology Tiruchirappalli, 20-21 February 2015.
  20. R.Prabakaran, J.Jerald, J.Cyril Pilligrin, P.Asokan (2016), “An Experimental Investigation of Micro-Turning Process using Coconut Oil-Water Emulsion as a Green Cutting Fluid”, International Conference on Smart Design and Sustainable Manufacturing, Alagappa Chettiar College of Engg. & Tech., Karaikudi.
  21. J.Jerald, T.Venkatesan (2016), “High Speed Micro-Drilling on Inconel 718 Super Alloy”, International Conference on Smart Design and Sustainable Manufacturing, Alagappa Chettiar College of Engg. & Tech., Karaikudi
  22. R.Prabakaran, J.Jerald, J.Cyril Pilligrin, T.Venkatesan, P.Asokan (2017), “Effect of Forces and Coolant on Micro-Turning of 316 L Stainless Steel”, International Conference on Recent Advances in Mechanical Engg., Govt. College of Engg., Salem.
  23. A. Saravanan & J. Jerald (2018) “ Computer Aided Framework to Select Geometric Tolerances considering Machining and Manufacturing attributes for an Assembly using Fuzzy-TOPSIS” – International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES 2018), at National Institute of Technology, Tiruchirappalli.
  24. Shrikant Bardiya, J Jerald. (2019) “The impact of process parameters on the tensile strength, flexural strength and the manufacturing time of fused filament fabricated (FFF) parts”. 2nd International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing, from 27th to 28th December 2019, at National Institute of Technology, Tiruchirappalli.
  25. Venkatesan Su, Jerald J, Asokan P, Harichandran R (2019), “A Study on the Mechanical and Corrosion Behaviour of Bronze – Tib2 Metal Matrix Composites”. 2nd International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing, from 27th to 28th December 2019, at National Institute of Technology, Tiruchirappalli.
  26. Shrikant Bardiya, Jerald. J (2019). “Effect of process parameters on the impact strength of fused filament fabricated (FFF) PLA parts”.  International Conference on Advances in Minerals, Metals, Materials, Manufacturing and Modelling (ICAM5-2019), from 25th to 27th September 2019, at National Institute of Technology, Warangal. 

National Conferences:

  1. J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of FMS using Ants Colony Optimization (ACO)”, National Conference on Modeling and Simulation in Manufacturing Systems (MOSIM 2003), Annamalai University, Chidambaram, pp. D55-61,15-16 March 2003.
  2. J. Jerald, P. Satheesh, P. Asokan, G. Prabaharan, “Scheduling Optimization of FMS Using Particle Swarm Optimization (PSO)”, National Conference on Modeling and Analysis of Production Systems (MAPS 2004), National Institute of Technology, Trichy, pp. 296-302, 22-23 January 2004.
  3. K. Thangadurai, , R. Saravanan, A. Balaji, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Genetic Algorithm”, National Conference on Advancement in Electrical and Mechanical Engineering, Mailam Engineering College, Mailam, Dindivanam, 20-21 February, 2004.
  4. K. Thangadurai, , P.Satheesh, R. Saravanan, A. Balaji,“Optimization of Operating Parameters in WEDM Process using Simulated Annealing Algorithm through a Weighted Approach”, National Conference on Recent Developments in Materials Processing, Bharathiyar College of Engg. and Tech., Karaikal, pp. 86 – 89, 6 March 2004.
  5. D. Murugaraj, P.Satheesh,, “Developing a Hill Climbing Optimization for Manufacturing Cost Optimization in FMS”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 685- 691,20-22 March 2004.
  6. D. Murugaraj, P.Satheesh,, “Optimization of Manufacturing Cost for FMS using Memetic Algorithm”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 698 – 704, 20-22 March 2004.
  7. M.S.R. Kumar, , P.Satheesh,“Memetic Algorithm based Approach for Sequence Dependent Schedule Generation for FMS Environment”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 692 – 697, 20-22 March 2004.
  8. K. Thangadurai, , P.Satheesh, R. Saravanan, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Memetic Algorithm”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 525 – 532, 20-22 March 2004.
  9. D. Murugaraj, P.Satheesh,, “Manufacturing Cost Optimization in FMS Using Genetic Algorithms”, Conference on Advances in Materials and Manufacturing Technology, IIT Madras, Chennai, pp. 141 – 142, 2 April 2004.
  10. K. Jaganathan, , P.Satheesh,“Optimization of Tool Requirement Planning in CNC Machines”, All India Manufacturing Technology Design and Research Conference (AIMTDR), VIT, Vellore, 20-22 December 2004.
  11. P. Asokan, “Integrated Scheduling of Jobs, AGVs and AS/RS in an FMS using Particle Swarm Optimization”, National Conference on Automation, Robotics and Soft Computing, NIT, Warangal, pp. 251 – 253, 17 – 18 January 2007.
  12. A. Gnanavel Babu, A. Noorul Haq, “Multi objective Scheduling of Jobs, AGVs and AS/RS in FMS using Artificial Immune System”, National Conference on Emerging Trends in Mechanical Engineering and Sciences, Bannari Amman Institute of Technology,Sathiyamangalam, pp. 229 – 239, 19-20 December, 2007.
  13. A. Gnanavel Babu, A. Noorul Haq, “Scheduling of Machines and AGVs in FMS using Sheep Flock Heredity Algorithm”, National Conference on Recent in Manufacturing & Management, Annamalai University, Chidambaram, 08-09 February, 2008.
  14. N. Rajesh Mathivanan, , Puspita Behera, R. Priyadharshini, “Analytical Prediction of Low-velocity Impact Response of Sandwich Panels”, National Conference on Discover Real Engineers and Mechanical Simulations, Perambalur, Tamilnadu, India, 2009, pp 8-15.
  15. R. Ramesh, “Concurrent Optimization of Assembly Tolerances for Quality using Scatter Search”, National conference on Recent advances in Manufacturing Technology, 2009, pp.25-32.
  16. Himanshu Varun Chandrakar, “Experimental Investigation and optimization of process parameters on Electrical Discharge Micro-Machining”, National conference on advanced material and processing technology, 2011, pp.25-32.
  17. Lohithaksha M Maiyar, “Integration of Process Planning and Scheduling using Hybrid Quantum Inspired Immune Algorithm”, National conference on advanced material and processing technology, 2011, pp.33-37.
  18. S.P.Leo kumar,“Manufacturing Applications of Micromachining for Automobile Components”, National Seminar on Emerging Technologies in Product Development for Safe and Sustainable Mobility” Proceedings of  XXVIII National Convention of Mechanical engineers  IE India Coimbatore 2012, pp.C67-70.
  19. S.P.Leo kumar,Nargundkar Aniket “ Experimental Investigation on Micro End milling of Cast Grade Virgin PMMA “ National Conference on Micro and Nano Fabrication”(Mnf-2013) on 21-23 January 2013.
  20. S.P.Leo kumar,“Experimental Investigation on Micro Drilling of C360 Brass“ National Conference on Micro and Nano Fabrication”(Mnf-2013) on 21-23 January 2013.
  21. Su. Venkatesan, J. Jerald, P. Asokan, R. Prabakaran, “A Comprehensive Review on Microfluidics Technology and Its Applications”, National Conference on Advances in Mechanical Engineering (NCAME-19), held at National Institute of Delhi, during 16th March 2019.
  22. T. Venkatesan, J. Jerald, P. Asokan, “Performance analysis of Temperature and MRR using High Speed Micro-drilling on Incoloy 800 Superalloy”, National Conference on Advances in Mechanical Engineering (NCAME -19), held at National Institute of Technology Delhi, during 16th March 2019.