| 125 |
|
Somasundaram Kumanan,
Veluchamy M Satheeshkumar V
|
|
Investigations on tribological behavior of additive manufactured SS316L parts under wet condition |
3rd International Conference on
Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) Dubai |
|
|
2023 |
| 124 |
| Somasundaram Kumanan and Karmuhilan M |
|
Influence of inter pass idle time on thermal effects in additive manufactured components by WAAM process |
3rd International Conference on
Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) Dubai |
|
|
2023 |
| 123 |
Ameena, A ., S Kumanan., Jatin Akhani |
Sustainable measures in heating applications in manufacturing system with multi criteria decision analysis - Case study |
International conference on innovations in energy engineering and cleaner production |
|
2022 |
| 122 |
Baranitharan.P., S.Kumanan |
Analytical characterization of sustainable bio-fuel obtained from pyrolysis of wood barks of bael |
International Conference on Adaptive technologies for sustainable growth (ICATS 2021) |
|
2022 |
| 121 |
Baranitharan.P., S.Kumanan |
Sustainable Manufacturing Of Synthetic Fuel As A Diesel Alternative: Obtained From Pyrolysis Of E-Waste |
International Conference of Modelling Simulation and Control - 2021 Coimbatore India 26-27 Feb 2021 |
184-195 |
2021 |
| 120 |
S Kumanan ., S. Jagadeesh |
Non distructive examination of cladding using phased array ultrasonic system |
International Materials, Industrial, And Manufacturing Engineering Conference (MIMEC 2017) |
|
2017 |
| 119 |
Anish Nair ., Kumanan,S |
Machining Quality Prediction in Abrasive Water Jet processing of Inconel 617 using Artificial Neural Network trained by PSO |
International Materials, Industrial, And Manufacturing Engineering Conference (MIMEC 2017) |
|
2017 |
| 118 |
Kumanan,S., Anish Nair |
Prediction of multi performance characteristics of wire EDM process using grey ANFIS |
International conference on materials and Intelligent manufacturing, Singapore |
216-223 |
2017 |
| 117 |
N.Manikandan ,S.Kumanan, C.Sathiyanarayanan |
Prediction of Metal Removal Rate in Electrochemical Machining using Multiple Regression Analysis |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
250-256 |
2015 |
| 116 |
Leo Kumar,S.P., J. Jerald and S. Kumanan |
Mathematical Modeling of Micro End Milling Process and Establishing Parameters to Develop A CAPP System, . |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
486-492 |
2015 |
| 115 |
Anish Nair, S. Kumanan |
Newer Materials for Supercritical Power Plant Components-A Manufacturability study |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
326-332 |
2015 |
| 114 |
R. Silambarasan, S. Kumanan |
Experimental Investigation on Welding and Heat Treatment of modified 9Cr-1Mo-V Steel for Supercritical Boilers |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
204-210 |
2015 |
| 113 |
Manish Patil, S. Kumanan |
Facility Lay out Optimization using Linear and Non-Linear Mixed Integer Programming |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
570-576 |
2015 |
| 112 |
Shantosh Shivhare, G. Jegan Jose, S Kumanan |
Field Service Scheduling using Mixed Integer Programming |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
639-645 |
2015 |
| 111 |
Pranav Sankpal, A Andrew, S Kumanan |
Maintenance strategies Selection using Fuzzy FMEA and Integer Programming |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
503-509 |
2015 |
| 110 |
G. Jegan Jose, S Kumanan, S Prasanna Venkatesan |
Optimize Field Service Management through Analytics |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
529-535 |
2015 |
| 109 |
S. J. Vaghela, S Kumanan |
Prediction of Temperature Distribution in Butt welded Joint using Finite Element Analysis |
International Conference on Advances in Production and Industrial Engineering(INCAPIE_2015),NIT Trichy |
228-234 |
2015 |
| 108 |
Leo Kumar, S, P; Jerald, J; Kumanan, S |
Automatic Feature Extraction and CNC Code Generation in a CAPP System for Micromachining |
International Conference on Advances in Materials and Manufacturing Engineering (ICAMME-14), NITK, Surathkal |
1987-1997 |
2014 |
| 107 |
Kumanan, S; Manikandan, N; Sathiyanarayanan, C |
Investigations of process parameters of Electrochemical machining of titanium (Ti6Al4V) alloy using Grey Relational Analysis |
International Colloquium on Materials, Manufacturing and Metrology (ICMMM-14), IIT Madras |
305-306 |
2014 |
| 106 |
Kumanan,S ; Jose,G |
Selection of technician in field service management using a mathematical model |
Twenty Ninth National Convention of Production Engineers and National seminar on Green Manufacturing Strategies |
NCPE/2014/016 |
2014 |
| 105 |
Kumanan, S; Silambarasan, R |
Influence of post weld heat treatment on mechanical properties of modified 9Cr-1Mo-V steel |
Twenty Ninth National Convention of Production Engineers and National seminar on Green Manufacturing Strategies |
NCPE/2014/022 |
2014 |
| 104 |
Kumanan, S; Vaghela, S,J |
Finite Element Analysis of submerged arc welding |
Twenty Ninth National Convention of Production Engineers and National seminar on Green Manufacturing Strategies |
NCPE/2014/021 |
2014 |
| 103 |
G. Jegan Jose, S Kumanan, S Prasanna Venkatesan |
A Practical approach for multiresource scheduling -heurisitic approach |
International Conference on Advanced Computing and Informaiton Technology (ICACIT -2013) |
|
2013 |
| 102 |
Leo Kumar, S, P; Jerald, J; Kumanan, S |
An Expert System for Cutting Tool Selection for Micromachining Processes |
International Conference on Precision,Meso,Micro and Nano Engineering COPEN 08 |
133-137 |
2013 |
| 101 |
Leo Kumar, S, P; Jerald, J; Kumanan, S;Aniket Nargundkar |
Experimental Investigation of Micro End Milling of Cast Grade Virgin PMMA |
1st National Conference on Micro and Nano Fabrication (Mnf -2013) at CMTI, Banglore, India |
321-324 |
2013 |
| 100 |
Leo Kumar, S, P; Jerald, J; Kumanan, S; Shashank Pansari |
Experimental Investigation of Micro Drilling of C360 Brass |
1st National Conference on Micro and Nano Fabrication (Mnf -2013) at CMTI, Banglore, India |
325-328 |
2012 |
| 99 |
Prasanna Venkatesan, S; Kumanan, S; |
Supply chain Risk Prioritazation using a hybrid MCDM approach |
International Conference on Manufacturing and Industrial Enginneering (ICMIE) Singapore |
E0091 |
2012 |
| 98 |
Prasanna Venkatesan, S; Kumanan, S |
Simulation Modeling for Supply Chain sourcing under risk |
International Simulation Conference of India (ISCI) Mumbai |
Paper Number 37 |
2012 |
| 97 |
Manikandan, N; Kumanan, S; Sathiyanarayanan, C |
Electrochemical Deburring of automobile components- A study |
XXVIII National Convention of Mechanical engineers IE India Coimbatore C40-C43 2012 |
C40-C43 |
2012 |
| 96 |
Leo kumar, S, P; Jerald, J; Kumanan, S |
Manufacturing Application of Micromachining for automobile components |
XXVIII National Convention of Mechanical engineers IE India Coimbatore |
C67-C70 |
2011 |
| 95 |
Ahilan, C; Kumanan, S ; Sivakumaran,N |
Prediction of shell andtube heat exchanger performance using artificial neural networks. |
International Conference on Advanced Computing and Communication Technologies ACCT |
307-312 |
2011 |
| 94 |
Kumar, K;Kumanan, S |
An Integrated fuzzy QFD and MCDM approach for Facility location Selection |
International Conference of Industrial Engineering ICIE |
ICIE 101 |
2011 |
| 93 |
Ahilan, C; Kumanan, S; Sivakumaran, N |
Modeling and analysis of cutting parameters influence on power consumption and surface roughness for CNC turning of AISI304 |
2nd International Conference on Production and Industrial Engineering, CPIE, NIT Jalandhar, India, |
M003 1-6 |
2010 |
| 92 |
Kumanan, S Suresh, R |
Supply Chain Performance evaluation using DEA/TOPSIS model |
International conference on Flexible Automation and Intelligent Manufacturing California USA |
464-471 |
2010 |
| 91 |
Kumanan, S ; Ilangkumaran, M |
Fuzzy VIKOR approach for selecting an optimum maintenance strategy |
International conference on Flexible Automation and Intelligent Manufacturing California USA |
28-35 |
2010 |
| 90 |
Kumanan, S; Kumar, K ; Edwin Raja Dhas, J |
Location selection An Integrated Particle Swarm Optimization with fuzzy clustering approach |
International conference on recent advances in Mechanical Engineering |
473-480 |
2010 |
| 89 |
Leo Kumar, S, P; Kumanan, S; Ahilan, C; Mohan kumar, R, S |
Automation of blanking die design parameters selection using intelligent system |
International conference on recent advances in Mechanical Engineering |
578-580 |
2010 |
| 88 |
Kumanan Somasundaram;Edwin Raja Dhas, J |
Prediction of Weld parameter based on weld geometry in SAW using intelligent decision making tool |
International conference on recent advances in Mechanical Engineering |
414-419 |
2010 |
| 87 |
Ilangkumaran, M; Kumanan, S |
Selecting the best maintenance strategy using AHP and VIKOR approaches |
International Conference on Advances in Industrial Engineering Applications |
MC05 1-6 |
2010 |
| 86 |
Udhayakumar, P; Kumanan,S |
Optimizing Tardiness of Job and Tool in a FMS using Genetic and Ant Colony Optimization Algorithm |
International Conference on Advances in Industrial Engineering Applications |
SH 07 |
2010 |
| 85 |
Udhayakumar, P; Kumanan, S |
Optimizing tardiness of Job and Tool in a FMS using Particle Swarm Optimization algorithm |
9th International Consortium of Students in Management Research, COSMAR |
PP 1-10 |
2009 |
| 84 |
Udhayakumar, P ; Kumanan, S |
Multi objective task scheduling of AGV in flexible manufacturing system using GA and PSO algorithm |
International Conference on ?Latest Trends in Simulation Modeling and Analysis COSMA |
37-41 |
2009 |
| 83 |
Udhayakumar, P; Kumanan, S |
Optimizing tardiness of job and tool in a FMS using Genetic algorithm |
International Conference on ?Latest Trends in Simulation Modeling and Analysis COSMA |
15-18 |
2009 |
| 82 |
Edwin Raja Dhas, J; Kumanan, S |
Neural Network modeling of Electron Beam Welding |
International Conference on Advanced Manufacturing and Automation INCAMA |
157 |
2009 |
| 81 |
Edwin Raja Dhas, J; Kumanan, S |
Particle Swarm Optimization technique to optimize parameters of SAW |
International Conference on Advances in Mechanical and Building sciences in the 3rd Millennium |
1057-1060 |
2009 |
| 80 |
Ahilan, C; Kumanan, S; Sivakumaran, N |
Design and implementation of fuzzy logic controller for an air conditioner with energy saving |
Seventh International conference on sustainable manufacturing |
72-77 |
2009 |
| 79 |
Edwin Raja Dhas, J; Kumanan, S |
Neural Network Modeling of Submerged Arc Welding |
National conference on Recent Development in Mechanical Engineering |
RDME 09 |
2009 |
| 78 |
Satheesh kumar, R, M; Asokan, P; Kumanan,S |
Artificial Immune System approach to solve Quadratic Assignment Formulation of Multi-row Layout Problem in FMS |
International Conference on Advances in Manufacturing Technology, (ICAMT) |
1 to 8 |
2008 |
| 77 |
Kumanan,S ; Bobin Cherian Jos |
Selection of partners in extended enterprise using a hybrid MADM method |
International conference on Facscinating advancement in Mechanical Engineering |
169-176 |
2008 |
| 76 |
Kumanan, S ; Bobin Cherian Jos, S |
Application of Artificial Immune Systems for the selection of partner companies in Virtual enterprise |
Second International and 23rd AIMTDR conference |
1081-1086 |
2008 |
| 75 |
Ahilan, C; Kumanan,S; Tamilselvan, R; Sivakumaran, N |
Multiobjective optimization of CNC turning process using Grey based Taguchi Method |
Second International and 23rd AIMTDR conference |
849-854 |
2008 |
| 74 |
Satheesh Kumar, R,M; Asokan, P; Kumanan, S |
Artificial Immune System based algorithm for supply chain oriented facility layout design |
6th International Conference on Supply Chain Management and Information Systems |
704-712 |
2008 |
| 73 |
Prasanna Venkatesan, S; Kumanan, S |
Decentralized Production Distribution Planning in Supply Chain using Intelligent Agents |
6th International Conference on Supply Chain Management and Information Systems pages India |
120-128 |
2008 |
| 72 |
Kumanan,S; Bobin Cherian Jos,S |
Selection of Partners in virtual Enterprise using Sheep Flocks Heridity Algorithm |
6th International Conference on Supply Chain Management and Information Systems pages India. |
113-119 |
2008 |
| 71 |
Kumar, K; Kumanan, S |
Competitive Facility location for Bidirectional distribution of Naval Logistics |
International Conference on Logistics and supply chain management |
ID AB 086 848-854 |
2008 |
| 70 |
Prasanna Venkatesan, S ; Kumanan, S |
Multi Objective Particle Swarm Optimization for distribution planning in Supply Chain Network |
18th International Conference on Flexible automation and Intelligent Manufacturing Sweden. |
574-581 |
2008 |
| 69 |
Kumanan, S ; Bobin Cherian Jos |
Selection of Partner companies in extended enterprise |
National Conference on Recent trends in Mechanical Engineering RTIME |
178-182 |
2008 |
| 68 |
Jesuthanam, C, P; Samgopiraj Yadav, C, V; Kumanan, S |
An Experimental analysis to determine the influence of material hardness and cutting parameters on surface roughness |
International conference on advanced materials and composites |
442-447 |
2007 |
| 67 |
Jesudhanam, C,P; Kumanan, S |
Neural Networks and Fuzzy logic in modeling the machining process |
International Conference on Trends in Industrial Measurements and automation |
257-261 |
2007 |
| 66 |
Edwin Raja Dhas, J; Kumanan, S |
Neurofuzzy approach for welding quality prediction |
International Conference on Trends in Industrial Measurements and automation |
362-366 |
2007 |
| 65 |
Kumar,K;Prasanna Venkatesan, S; Kumanan, S |
Optimization of Facility location for operational logistics using simulated annealing |
11th Annual Conference of society of Operations Management India |
DC II 10 |
2007 |
| 64 |
Dev Anand, M; Selvaraj, T; Kumanan, S |
Parameter Identification of Robot Arm using Artificial Neural Networks |
National Conference on Computational Intellgence |
001 -010 |
2007 |
| 63 |
Ashutosh Hengle; Joseph Amalesh; Rapinder Sawhney;Somasundaram Kumanan |
Estimating Product Development Time Using Extended PERT Model |
Annual Conference of IIE 2007 Nashville, USA. |
1575-1580 |
2007 |
| 62 |
Yuerong Chen; Xueping Li; Somasundaram Kumanan |
Job Completion Time Variance Minimization on Identical Parallel Machines |
Annual Conference of IIE 2007 Nashville, USA. (Adjudged as BEST PAPER ) |
974-979 |
2007 |
| 61 |
Ilankumaran, M ; Kumanan, S |
Decision making in maintenance using Fuzzy logic |
National Conference on recent developments in production and operations management |
63-66 |
2007 |
| 60 |
Shajahan, C, J; Subhramanyan Embranthiri, E; Kumanan, S |
A Simulated Annealing Based Optimization Frame Work For Estimating Product Development Iterative Time |
Proceedings on National conference on Factory Automation, Robotics and Soft Computing |
315-319 |
2007 |
| 59 |
Edwin Raja Dhas, J; Kumanan, S |
Prediction Of Weld Bead Width Using Artificial Neural Networks |
Proceedings on National conference on Factory Automation, Robotics and Soft Computing |
382-385 |
2007 |
| 58 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Janarthanan, J |
Neuro Fuzzy Based Fault Diagnosis System for Robot Manipulator |
22nd International Conference on CAD/CAM Robotics and Factories of the Future (CARs &FOF) India |
822-832 |
2006 |
| 57 |
Udhayakumar, P; Kumanan, S |
AGV Task Scheduling of flexible manufacturing systems using genetic algorithm |
International Conference on ?Total engineering, analysis and manufacturing technologies, TEAM TECH 2006 |
P 83 |
2006 |
| 56 |
Dev Anand,M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Fault Detection and isolation in robotic manipulator via hybrid learning neural networks |
Firstr International and 22 nd AIMTDR conference |
123-129 |
2006 |
| 55 |
Asokan, P; Kumanan, S; SathisKumar, S |
Selection of optimal cutting conditions for CNC multitool drilling system using Genetic algorithm |
First International and 22 nd AIMTDR conference |
283-288 |
2006 |
| 54 |
Satheesh Kumar, R, M; Asokan, P; Kumanan, S |
Design of loop layout in Flexible manufacturing system using non traditional optimization technique |
First International and 22 nd AIMTDR conference |
315-319 |
2006 |
| 53 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Mago Stalany, V |
Tolerance Specification and Identification of Robot Kinematic Parameters Using Genetic Algorithms |
International Conference on Intelligent Systems and Control (ISCO) |
395-398 |
2006 |
| 52 |
Ch rasekaran, M; Asokan,P; Kumanan, S; Umamaheswari, S |
A hybrid approach for optimization of multiobjective job shop scheduling problems |
International conference eon Global Manufacturing and Innovation |
1- 6 |
2006 |
| 51 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Mago Stalany, V; Ansalam Raj, T,G |
Optimization of Robot Parameters Using Genetic Algorithms |
International Conference on Global Manufacturing and Innovation (GMI),Paper India. |
Number 91 |
2006 |
| 50 |
Siva Sankar, R; Asokan, P; Kumanan, S |
Optimization of parameters for Turning operations using ANN and Particle Swarm Optimization |
CARs and FOF '06, India |
334-341 |
2006 |
| 49 |
Dev Anand, M; Selvaraj, T; Kumanan, S;Ajith Bosco Raj |
Robotics in Online Inspection and Quality Control |
International conference on ?Resource Utilization and intelligent system? (INCRUIS-2006) India |
307-314 |
2006 |
| 48 |
Thillaivanan, A; Asokan,P; Kumanan, S; Srinivasan, K,N |
Determination of Optimal Cutting Parameters for the EDM Process using Artificial Neural Network and Genetic Algorithm |
International conference on recent advances in Materials and Processing |
ID 12.05 Page 67 |
2006 |
| 47 |
Christu Paul,R; Asokan, P ; Kumanan,S; Vijayakumar, R,L |
Tabu search algorithm to solve machine layout problem |
All India Seminar on Manufacturing and Management of Intelligent materials IE (India) |
138-145 |
2006 |
| 46 |
Dev Anand, M; Selvaraj,T; Kumanan, S; Austin Johnny, M |
Fuzzy Logic Based Control of Stationary Robot Arm |
2nd National Conference on Advances in Manufacturing and Recourse (AMARA) India |
99-106 |
2006 |
| 45 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Artificial Neural Network Based Control of Stationary Robot Arm |
National Conference on Advances in Manufacturing Engineering (NCME) India |
300-310 |
2006 |
| 44 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Gunavathi, N |
Tolerance Optimization of Robot Arm Parameters using Taguchi Method |
National Conference on Contemporary Approaches in Design and Manufacturing (CADAM) |
1.34 - 1.42 |
2006 |
| 43 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Analytic Hierarchy Process for Selection of Robotics System |
National Conference on Recent Trends in Mechatronics Nanotechnology and Robotics(RTMNR) India |
274-279 |
2006 |
| 42 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Gunavathi, N |
Tolerance Optimization of Robot Kinematic Parameters Using Taguchi Method |
National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST) |
Paper Number 250 |
2006 |
| 41 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
A FRIEND Functional Robot System with User Friendly for Assisting Handicapped People |
National Conference on Recent Trends in Engineering and Application Computational Technologies (REACT), India |
27- 31 |
2006 |
| 40 |
Deva Anand, M; Selvaraj, T; Kumanan,S; Mago Stalany, M |
Tolerance Specification of Robot Kinematic Paramenters Using Genetic Algorithms |
National Conference on Recent Advances in Product Design, Materials Technology and Manufacturing Systems RAPMATS |
Abstract |
2006 |
| 39 |
Kumanan, S |
Modeling with Petrinets |
National conference on modeling and Simulation in Manufacturing |
IN 13-IN18 |
2006 |
| 38 |
Christu Paul, R; Asokan, P; Kumanan, S; Vijayakumar,R,L |
A Genetic Algorithm approach for Machine Layout Design |
National conference on recent advances in Product Design, Materials Technology and Manufacturing Systems RAPMATS |
41-45 |
2006 |
| 37 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Solution Approach problem Related in the field of service Robot Task Planning |
International Conference on Operations research for Development (ICORD-V) India |
451-456 |
2005 |
| 36 |
Dev Anand,M; Selvaraj, T; Kumanan, S |
Development of CAD/CAE based Robot Mapping and Localization Error in structured and unstructured environment |
14th ISME International Conference on Mechanical engineering in Knowledge Age India |
14-21 |
2005 |
| 35 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Neurofuzzy based intelligent Motion Planning for Robotics |
IX Annual International; Conference of the society of Operations Management |
01-Oct |
2005 |
| 34 |
Christu Paul; AsokanP; Kumanan, S |
An Approach to Solve Single Row Machine Layout Problem Using Tabu Search Technique |
IX Annual International Conference of the Society of Operations Management. |
41-45 |
2005 |
| 33 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
A Neuro Fuzzy Positioning System of Robot Arm |
International Conference on Productivity and Quality Research IIT Delhi India |
780-790 |
2005 |
| 32 |
Asha, A; Udhayakumar, P; Kumanan, S |
A Heuristic approach for routing and dispatching of automated guided vehicles |
International Conference on Advances in materials, product design and manufacturing systems India |
601-607 |
2005 |
| 31 |
Siva Sankar,R; Asokan, P; Kumanan, S |
Optimization of cutting parameters for Multipass Turning operation using Particle Swarm Optimization |
ICCES?05, INDIA |
3292-3297 |
2005 |
| 30 |
Shajahan, C, J; Kumanan, S |
Design for six sigma: A Break through strategy for managing Product Development process |
International Conference on Productivity and Quality Research IIT Delhi India |
Abstract |
2005 |
| 29 |
Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M |
Motion planning strategies with GA /Adaptive Neurofuzzy for intelligent robots tasks in a different environment |
International conference in Advances in materials product design and manufacturing systems ICAMPM 2005 |
1116 -1121 |
2005 |
| 28 |
Jesudhanam, C, P; Kumanan, S |
Prediction and Control of Machining Quality using Neuro Fuzzy System |
21st All India Manufacturing Technology Design and Research Conference |
948-954 |
2005 |
| 27 |
Jesudhanam, C, P ; Kumanan, S |
Prediction of Surface Roughness using Fuzzy Logic System |
National Conference on Modeling and Analysis of Production Systems |
156-160 |
2005 |
| 26 |
Kumanan,S; Prasanna Venkatesan, S; Balakumaran, S |
Multi objective optimization of supply chain logistics network using a genetic algorithm |
Fourth National Conference on Business Research Coimbatore India |
43-53 |
2005 |
| 25 |
Jafferson, J,M; Jesuthanam, C,P; Kumanan, S |
Prediction of Surface Roughness using AI techniques - A review |
National conference on Recent Advances in Mechanical Engineering |
83-90 |
2005 |
| 24 |
Shajahan, C,A; Kumanan, S |
Challenging issues in Managing New Product Development |
International Conference on Manufacturing and Management, India |
165-170 |
2004 |
| 23 |
Prasanna Venkatesan, S ; Kumanan,S |
Production Distribution Network analysis in Supply chain using Excel |
National conference on Challenges in achieving Global Quality |
473-476 |
2004 |
| 22 |
Canute,X ; Kumanan,S |
Computer Aided Maintenance Planning System |
National Conference on B Modeling and Analysis of Production Systems |
69-73 |
2003 |
| 21 |
Raja, K ; Kumanan, S |
Project Network Techniques For Modern Manufacturing |
National Conference on B Modeling and Analysis of Production Systems pp 63-68, 2004 |
63-68 |
2003 |
| 20 |
Jesudhanam, C,P; Kumanan, S |
In-Process Quality Control in Machining using Artificial Neural Network |
National Conference on Advanced Machine Vision Systems for Societal Applications |
216-218 |
2003 |
| 19 |
Prasanna Venkatesan, S; Kumanan,S |
Supply Chain Planning using Excel |
National Conference on Business Research Coimbatore India (Adjudged as Best Paper) |
4.30 -4.34 |
2003 |
| 18 |
Raja, K; Kumanan, S; Krishnaiah Chetty, O,V; |
Petri Net- A Modeling and Simulation Tool for Manufacturing Projects |
National Conference on Business Research Coimbatore India |
4.34 - 4.41 |
2003 |
| 17 |
Boopalan, N; Kumanan, S |
Fixture Layout optimization using FEM and GA |
National Conference on World Class Manufacturing Coimbatore India |
342-347 |
2003 |
| 16 |
Baskar, P; Kumanan, S |
Fuzzy Expert System for tool selection for turning Center |
National Conference on World Class Manufacturing Coimbatore India |
354-359 |
2003 |
| 15 |
Senthil Kumaran, S; Kumanan, S |
Virtual Manufacturing - A case study with production centered approach |
National Conference on world Class Manufacturing, Coimbatore, India. |
329-334 |
2003 |
| 14 |
Kamesh, S; Kumanan,S |
Prediction of Machining Quality Using Taguchi?s Technique And Artificial Neural Networks |
National Conference on Modeling and Simulation Indiapp. |
E7-E12 |
2002 |
| 13 |
Nannee Saheb, S,D; Kumanan, S |
Modeling of Hot Extrusion Process using Artificial Neural Networks and Genetic Algorithm |
National symposium on Advances in Metal Forming India |
SAMF |
2002 |
| 12 |
Kumanan, S; Krishnaiah Chetty, O,V |
Resource Leveling using Petrinets and Genetic Algorithms |
International Conference on Operations Research, Anna University, India. |
CC20 |
2001 |
| 11 |
Kumanan,S ; Krishnaiah Chetty,O,V |
Time-cost trade-off analysis for manufacturing using Petri nets and GA |
Symposium on manufacturing Excellence, IIT Madras |
157-158 |
2001 |
| 10 |
Kumanan,S; Krishnaiah Chetty, O,V |
Managing Business Process reengineering with Petri Nets |
International Conference of logistics and Supply chain management, Coimbatore, India. |
280-285 |
2000 |
| 9 |
Kumanan,S; Krishnaiah Chetty,O,V |
A new method for optimal resource leveling using Petri nets and GA |
17th International Conference of CAD/CAM, Robotics and Factories of Future, Durban, South Africa |
662-669 ISBN 1-86840-432-3 |
2000 |
| 8 |
Kumanan,S ; Krishnaiah Chetty,O,V |
Project Management through Petrinets |
16th International Conference of CAD/CAM, Robotics and Factories of Future, Trinidad, West Indies, CARS&FOF 2000 |
645-652 ISBN 976-620-140-4. |
2000 |
| 7 |
Kumanan,S; Krishnaiah Chetty, O,V |
Analyzing Product Development time with Petrinets |
19th All India Manufacturing Technology Design and Research Conference |
601-606 |
1998 |
| 6 |
Jeetendra Kumar, V, A;Kumanan, S; Krishnaiah Chetty, O,V |
Application of Petri nets to Project Management |
14th International Conference on CAR&FOF 1998, Coimbatore, India, (Best Management Research Paper 1998-1999-Sardar Patel University Award) |
853-860 |
1997 |
| 5 |
Kumanan, S ; Saravanan, S |
Design Of Cellular Manufacturing Using Genetic Algorithm |
Intelligent Manufacturing System a Technology Watch. |
5.5.1 - 5.5.6 |
1997 |
| 4 |
Kumanan, S |
Methods Of Industry Institute Partnership-A Means For Mutual Excellence |
AICTE-ISTE Sponsored Seminar in REC, Trichy |
8 to 15 |
1996 |
| 3 |
Kumanan, S |
Quality in design of axisymmetric deep drawing die by computer aided analysis |
National Conference-QUEST 95 DRDL India, |
D 33- D36 |
1995 |
| 2 |
Kumanan, S ; Saravanan, S |
Quality and Reliability On Mechatronic Systems |
Seminar on Mechatronics, Anna University |
3.1 - 3.5 |
1995 |
| 1 |
Kumanan, S |
Computer Aided Quality Assurance |
International Conference Cad, Cam, Robotics And Factories Of Future INCARF?96- India |
564-569 |
1995 |
