Job Title | Employer | From | To |
---|---|---|---|
Professor | Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India | 12th March 2018 | Till date |
Associate Professor | Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India | 23rd April 2010 | 11th March 2018 |
Assistant Professor | Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India | 23rd April 2007 | 22nd April 2010 |
Lecturer | Department of Management Studies, National Institute of Technology, Tiruchirappalli, India | 23rd July 1999 | 22nd April 2007 |
Research Associate | Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India | 25th June 1998 | 22nd July 1999 |
Examination | Board / University | Year | Division/ Grade | Subjects |
---|---|---|---|---|
Ph.D | Technical University of Clausthal, Clausthal-Zellerfeld, Germany | 2006 | Title: Experimental investigations on laser clad/alloyed carbide reinforced intermetallic matrix composites to improve erosion resistance of turbine blade materials. | |
M.B.A. | Madurai Kamaraj University, Madurai, India. | 2001 | First class | |
M.E. - Manufacturing Technology | National Institute of Technology, Tiruchirappalli, India. | 1998 | First class with distinction | |
B.E. - Mechanical Engineering | Coimbatore Institute of Technology, Coimbatore, India. | 1996 | First class with distinction |
Position | Faculty/Department/Centre/Institution | From | To |
---|---|---|---|
Dean | Planning and Development | Dec 2019 | Till Date |
Head | Centre of Excellence in Manufacturing | May 2018 | Dec 2019 |
Head | Department of Production Engineering | Feb 2015 | Jan 2018 |
Associate Dean | Planning and Development | Oct 2012 | Feb 2015 |
Member | Centre for Excellence in Corrosion and Surface Engineering | 2017 | Till Date |
Member | Department Administrative Council | 2012 | 2015 |
Staff Advisor | Entrepreneurship cell | March 2008 | Oct 2009 |
Year of Award | Name of the Award | Awarding Organization |
---|---|---|
2005 | 3rd Best Student Paper for a presentation made in an International Congress on Applications of Lasers and Electro-Optics (ICALEO) | International Congress on Applications of Lasers and Electro-Optics (ICALEO), Miami, Florida, USA. |
2017 | Young Scientist | Department of Science and Technology (DST), Government of India |
Year of Award | Name of the Fellowship | Awarding Organization | From (Month/Year) | To (Month/Year) |
---|---|---|---|---|
2004 | German Academic Exchange Service Fellowship to to do research at ISAF, Technical University of Clausthal, Germany. | DAAD, Germany | June 2004 | September 2006 |
S. No | Title | Student Name | Year |
---|---|---|---|
1. | Characterization of Laser Shock Peened Ti-6Al-4V with and without ablative coating | Rahul Mahto | 2022 |
2. | Numerical characterization of Femtosecond laser ablation of Aluminium and Ti-6Al-4V to study the topology of ablation crater | Kumaresh | 2021 |
3. | An Investigation on Resistance Spot Welding of Ti-6Al-4V Sheets Using Taguchi's Design of Experiment | E V Abhinav | 2020 |
4. | Investigation on the performance of a laser surface textured ti6Al6V electrode in a microbial fuel cell | Mathew John | 2020 |
5. | Improvement of Adhesion Bond Strength of Thermal Plasma Spray Coated Material | Survase Akshay Shivaji | 2020 |
6. | An Investigation on Tig Welding of Ti-6Al-4V Sheets Using Taguchi's Design of Experiment | E V Abhinav | 2019 |
7. | Influence of laser surface texturing on the tribological performance of CuNiIn coated Ti6Al4V | Mathew John | 2019 |
8. | Thermal Plasma Spray Coating of Nickel Aluminium Powder on Inconel 718 Alloy | Survase Akshay Shivaji | 2019 |
9. | Optimising The Parameters for Laser Based Micro Processing on Reflective Materials | Vysakh Mohan | 2019 |
10. | Optimization of parameters of laser drilling on Inconel 718 material using Taguchi-ANOVA method | Mudit Singh | 2019 |
11. | Laser processing of magnesium for biomedical applications | Antony George | 2019 |
12. | Enhancing the properties of glass fibre reinforced composite joint with metal sheet using laser-based surface patterning | Vysakh Mohan | 2018 |
13. | Effect of variation of laser drilling parameters on drilling of Inconel 718 material | Mudit Singh | 2018 |
14. | Tribological study of the surface characteristics of laser surface textured grade 5 Titanium. | Antony George | 2018 |
15. | Modification of Wetting Property of Nickel Based Super Alloy Surface by Picosecond Laser Texturing | G.Prabu | 2017 |
16. | A Study on Wear Characteristics of a Nickel Based Super Alloy (BZ112Y) Surface Textured with Pico Second Laser | Chebrolu Kalyan | 2017 |
17. | Defining Instruction for Continued Airworthiness of a Jet Engine | Hrishikesh KP | 2017 |
18. | Enhancement of Adhesion Strength of Thermal Barrier Coating Through Laser Surface Texturing of Aero- Turbine Materials | Aditya S.V | 2017 |
19. | Impact of Fuel on Gas Turbine Combustor Component Durability | Naveena K.P | 2016 |
20. | Identification and Elimination of Wastes From Cable Cu ng for Improved Productivity Using Value Stream Mapping | Pranay Vi hal Kamble | 2016 |
21. | Fabrication of Titanium Oxide Nanotube Arrays for Laser Surface Nano Texturing | Chebrolu Kalyan | 2016 |
22. | Modelling and Synthesis of Engine Overhaul Data to Infer on Operational Cost | Hrishikesh KP | 2016 |
23. | Effect of CNT Based Laser Alloying on Wear Behavior of Ductile Iron | G.Prabu | 2016 |
24. | Study of Tribological Proper es of Laser Treated Nodular Cast Iron | Deep Chakravorty | 2016 |
25. | Characterization of SMA,GTA & PTA Welding for Hard facing of Stellite 6 on Austenitic Stainless Steel | M.Ferozhkhan | 2016 |
26. | Laser Surface Modification of Nodular Cast Iron for Improved Tribological Performance | Deep Chakravorty | 2015 |
27. | Laser Based Surface Polishing of Ti and Ni Based Alloys | Pranay Vihal Kamble | 2015 |
28. | Laser Surface Texturing on Steel to Improve Hydrophobic Effect | Lankireddy Manikanta Reddy | 2015 |
29. | Preparation of Coating for Ti-6Al-4V for the Use in Biomedical Applications Using Anodization | S Ravi Kiran | 2015 |
30. | Taguchi Optimization of AISI D-2 Die Steel Using Graphite Based Electrical Discharge Coating | Mohit Singhal | 2014 |
31. | Laser Surface Texturing on Silicon Wafer | Lankireddy Manikanta Reddy | 2014 |
32. | Taguchi Optimization of AISI D-2 Die Steel Using Molybdenum Based Electrical Discharge Coating | Mohit Singhal | 2013 |
33. | Numerical Finite Element Investigation on Laser Cladding of Aerospace Components | Arun G.K | 2013 |
34. | Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications | Rahul V.S | 2013 |
35. | Numerical Simulation and Experimental Investigation of Dissimilar Welded Joints | Vinneth Murali | 2013 |
36. | Erosive- Corrosion Behaviour of Laser Surface Treated Hastelloy C-276 | Rajith K.R | 2013 |
37. | Optimizing Delivery Lead Time in the Subcontracting of Boiler Components | G.Nila | 2012 |
38. | Comparative Study of Tribological Behaviour of Laser Surface Treated Hastelloy C276 in Nitrogen and Argon Atmosphere | K.E.Sarath Raghavendra Babu | 2012 |
39. | Tribological Behaviour of D-Gun Sprayed Al2o3-TiO2 Coating | D.Sudhakar | 2012 |
40. | Experimental Analysis and Simulation Studies of Laser Surface Treated Hastelloy C-276 | Rajith K.R | 2012 |
41. | Tribological Behaviour of D-Gun Sprayed Cr3C2-NiCr Coating | D.Sudhakar | 2012 |
42. | Laser Surface Nitriding of Hastelloy C276 | K.E.Sarath Raghavendra Babu | 2011 |
43. | Dry Sliding Wear Characteristics of Aluminium Composites | M.Jeyashree | 2011 |
44. | Dry Sliding Wear Behaviour of Nickel-Chromium Electroplated Low Carbon steel (AISI 1020) at Elevated Temperatures | Raayya Peche | 2010 |
45. | Sliding Wear Characteristics of Nano Al2O3 Dispersed Grey Cast Iron Composite | M.Jeyashree | 2010 |
46. | Improved Tribological Properties of Ti-6Al-4V Alloy by Laser Surface Mel ng | Salunke Balaji Mohan | 2010 |
47. | Tribological Study of Chrome Coated AISI 304 Austenitic Stainless Steel | K.S.R.Krishna | 2010 |
Sponsoring Agency: DRDO, Ministry of Defence, Government of India
Cost: 2.25 crores
Duration: 2022-2025
Sponsoring Agency: SERB, DST, Government of India
Cost: 30.36 Lakhs
Duration: 2022-2025
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 22.74 Lakhs
Duration: 2019-2022
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 15.37 Lakhs
Duration: 2020-2021
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 22.39 Lakhs
Duration: 2020-2021
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 24.42 Lakhs
Duration: 2019-2020
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 98.6 Lakhs
Duration: 2018 -2021
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 34.4 Lakhs
Duration: 2018-2019
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 9.6 Lakhs,
Duration: 2018 -2019
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 21.84 Lakhs
Duration: 2018-2020
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 17.5 Lakhs
Duration: 2018 -2019
Cost: 21.65 Lakhs
Duration: 2018 -2019
Cost: 9.6 Lakhs
Duration: 2016 -2018
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 9.4 Lakhs
Duration: 2016 -2017
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 9.8 Lakhs
Duration: 2016 -2017
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 17.2 Lakhs
Duration: 2016 -2017
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 8.01 Lakhs
Duration: 2015 -2016
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 9.90 Lakhs
Duration: 2014 -2015
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 49.95 Lakhs
Duration: 2013 -2015
Sponsoring Agency: DRDL, Hyderabad, Government of India
Cost: 9.90 Lakhs
Duration: 2013 -2015
Sponsoring Agency: GTRE, Bangalore, Government of India
Cost: 9.90 Lakhs
Duration: 2013 -2014
Sponsoring Agency: Council of Scientific and Industrial Research (CSIR), New Delhi
Cost: 14.0 Lakhs
Duration: 2011 -2014
Sponsoring Agency: Bharat Heavy Electricals Limited (BHEL), Government of India
Cost: 13.5 Lakhs
Duration: 2010 -2012
Sponsoring Agency: Department of Science and Technology (DST), Government of India
Cost: 18.9 Lakhs
Duration: 2008 -2011
Name of the PhD Scholar | Title of PhD Thesis | Role(Supervisor/ Co-Supervisor) | Year of Award |
---|---|---|---|
G. Prabu | Studies on Tribological Behavior of Ti-6Al-4V Surface Modified with AlCrCoCuFeNi High Entropy Alloy | 2021 | |
S. Ramkumar | Laser Surface Modification of CFRP composite to enhance adhesive bond strength | 2020 | |
A. Haja Maideen | Electrical Discharge Surface Alloying of Aluminium 7075 with Nickel and Molybdenum Powder | 2020 | |
N. Balamurali Krishnan | Laser surface treatment of nickel-based superalloy for enhancing erosion resistance of aero gas turbines | 2019 | |
F. Peter Prakash | Mechanical and tribological studies on laser surface textured nickel-based superalloy | 2019 | |
K. Parthiban | Parametric optimization of laser micro-drilling of TBC coated nickel-based superalloy | 2019 | |
K. E. Sarath Raghavendra Babu | Experimental Investigations on micro/nano laser patterning for anti-reflectance of silicon | 2018 | |
N. Jeya Prakash | Tribological Studies on laser surface modified nodular cast Iron | 2018 | |
V. Dillibabu | Weldability and tribological studies on nickel based super alloy for aero engine applications | 2017 | |
S. R. Dhinesh Kumar | Laser surface modification of functionally graded thermal barrier coatings for aero-engine applications | 2017 | |
Muhammed Anaz Khan | Thermo-Mechanical Characterisation of laser treated functionally graded thermal barrier coatings | 2017 | |
R. Ramesh | Mechanical and microstructural studies on laser metal deposited nickel and titanium based aero-engine blades | 2016 | |
I. Arun | Experimental investigations on the wear resistance of electrical discharge alloyed metal matrix composites | 2015 | |
M. Hashim | Experimental investigation on the tribological properties of Laser surface treated Hastelloy C-276 | 2013 | |
G. M. Balamurugan | Comparative wear studies on WC-Co Plasma sprayed and chrome plated AISI 304 Austenitic stainless steel at elevated temperature | 2012 | |
N. L. Parthasarathi | High temperature tribological studies of NiCrBSiCFe Plasma sprayed AISI 316 Austenitic Stainless steel | 2011 |
Topic | Date | Inviting Organization |
---|---|---|
Research Scope in Laser Materials Processing | 5th March 2022 | NIT Trichy |
Flexible 3D Printing operation & Prototype Development | 21-25th February 2022 | NIT Arunachal Pradesh(online) |
3D scanning and 3D slicing | 6-10th December 2021 | University College of Engineering, Nagarcoil |
Additive Manufacturing-An Overview | 20-24th September 2021 | SA Engineering College, Chennai |
Industry 4.0 | 17th October, 2020 | Pandit Deendayal Petroleum University, Gujarat. |
Advances in Laser Materials Processing | 9th October, 2020 | NIT, Surat- TEQIP Sponsored STTP |
Application of Lasers in Materials Processing | 10th September | Annamalai University, Chidambaram |
Lasers in Manufacturing | 13th August, 2020 | NDRF Online Internship Program, Bangalore |
Writing research proposals and experience in handling the grant | 31st July 2020 | NAFEMS India, Bangalore |
Research proposal writing for grant | 28th July 2020 | RMD Engineering College, Chennai |
Tribology of laser surface engineered materials | 27th July 2020 | Rajalakshmi Engineering College, Chennai |
Introduction to Industry 4.0 | 25th July 2020 | Sri Sairam Engineering College, Chennai |
Opportunities for Industry 4.0 applications in Indian Industries | 3rd January 2020 | Siemens CoE-NITT and The Institution of Engineers (India) , NIT, Trichy |
Research Scope in Laser Materials Processing, CIT - TEQIP Sponsored Industry Connect Workshop | 5th December 2019 | CIT, Coimbatore |
Siemens CoE in Manufacturing and its facility | 1st August 2019 | JP College of Engineering, Tenkasi |
Laser Welding Techniques | 29th April 2019 | IIITDM Kancheepuram, Chennai |
Unconventional machining process | 26th February 2019,. | K.Ramakrishnan college of Technology, Trichy |
Advances and Challenges in Surface Engineering | 2nd April 2018 | Aalim Muhammed Salegh College of Engineering, Chennai |
Scope of laser based additive manufacturing in aerospace industry | 22nd February 2018 | Veltech Dr.RR & Dr.SR University, Chennai |
3D Printing | 7th September 2017 | Bannari Amman Institute of Technology, Sathi |
Writing Proposals for Grants | 07th October 2017 | Kumaraguru College of Technology, Coimbatore |
Recent Advances in Mechanical Engineering (ICRAME-2017) | 02nd September 2017 | Kingston Engineering College, Vellore |
Exploratory studies on Laser Surface patterning for high temperatre protective coatings, | 03rd May 2017 | DRDO, Bangalore |
Sharing the Success Track of University- Industry Collaboration, | 17th March 2017 | ED Cell, Anna University, Coimbatore |
Critical Applications of Laser in Turbine Industry | 16th March 2017 | IIT Madras, Chennai |
Laser based Manufacturing Technologies | 04th March 2017 | ASM Chapter, VIT, Vellore |
Advances in Laser Material Processing | 03rd March 2017 | Kingston Engineering College, Vellore |
Prevention of Failures during Manufacturing and Production | 03rd February 2017 | Anna University, MIT, Chennai |
Advances in Manufacturing Technology | 25th July 2016, | Mount Zion College of Engineering and Technology, Pudukottai |
Laser Surface Engineering - State of Art | 11th April 2016, | GCE, Srirangam |
Coatings for high temperature applications through Laser | 16th February 2016 | NLC, Neyveli |
Laser based manufacturing processes | 02nd February 2016 | Hindusthan Engineering college, Coimbatore |
Small Gas Turbine Engines | 28th January 2016 | K.S. Rangasamy college of Technology, Tiruchengode |
Advanced Research in Materials for Engineering and Technological Applications, | 17th July 2015 | Anna University, Trichy |
Laser Based Material Processing Techniques for SGT Applications | 15th June 2015 | GTRE, DRDO, Bangalore |
Laser Surface Treatments in Composites | 24th April 2015 | Dr. Mahalingam College of Engineering and Technology, Pollachi |
Laser Surface Engineering | , 13th April 2015 | Madurai Institute of Engineering and Technology Sivagangai |
Laser Surface Engineering for Industrial Solutions | 27th March 2015 | KPR Institute of Engineering and Technology, Coimbatore |
Laser Surface Engineering for Tribological Solutions | 11th February 2015 | National Engineering College, Kovilpatti |
Laser physics to tailor surface chemistry | 07th February 2015, | PSGRKC, Coimbatore |
Laser Surface Engineering | 27th December 2014 | Annamalai University, Chidambaram |
Laser Surface Engineering | 12th November 2014 | Periyar Maniammai University, Thanjavur |
Laser Materials Processing | 05th September 2014 | KSK College of Engineering & Technology, Kumbakonam |
Nanoscience and Laser Materials Processing | 09th March 2013 | Jamal Mohamed College, Trichy |
Critical Industrial Applications of Laser | 28th January 2012 | Annai College of Engineering and Technology, Kumbakonam |
Composite based Surface Engineering for Industrial Tribo components | 08th November 2011 | Jayaram College of Engineering and Technology, Tiruchirappalli |
Laser Science and Technology | 13th October 2010 | PRIST University, Tiruchirappalli Campus, Tiruchirappalli |
Surface Engineering for Improved Tribological Properties of Industrial Components | 30th April 2010 | Kongu Engineering College, Erode |
Recent Trends in Laser Based Applications, | 22nd April 2010 | Sethu Institute of Technology, Virudhunagar |
Tribology | 08th March 2010 | PSG College of Technology, Coimbatore |
Laser Technology for Modern Industries, | 04th February 2010 | JJ College of Engineering, Tiruchirappalli |
Modern Manufacturing applications based on Laser | 07th September, 2009 | Mookambigai College of Engineering, Kalmavur, Pudukkottai |
Lasers for composite Materials Processing, Composite Materials: Processing challenges and opportunities | 14th July 2009 | National Institute of Technology, Tiruchirappalli |
Laser micromachining | 06th July 2009 | MAM College of Engineering, Tiruchirappalli |
Laser Materials Processing | 16th March 2009 | Jamal Mohamed College, Tiruchirappalli |
Lasers in Industry | 09th January 2009 | Thanthai Rovever Institute of Polytechnic College, Perambalur |
Laser Processing of Materials - An Overview, Emerging Industrial Applications of laser | 01st July 2008 | National Institute of Technology, Tiruchirappalli |
Laser Based Manufacturing for Competitive Advantage | 08th April 2008 | Institution of Engineers, Tiruchirappalli Chapter |
Lasers in Manufacturing, Recent Trends in Advanced Manufacturing | 18th March 2008 | National Institute of Technology, Tiruchirappalli. |
Laser Surface Engineering, Radiant Energy welding processes | 15th March 2008 | National Institute of Technology, Tiruchirappalli. |
Role of Lasers in Industry | 13th March 2008 | EGS Pillai Engineering College, Nagapattinam |
Industrial Applications of Laser, Laser Processing of Materials | 06th March 2008 | National Institute of Technology, Tiruchirappalli |
Lasers for Indian Automobile Industry | 26th August 2009 | Oxford Engineering College, Tiruchirappalli |
Laser alloying-an experimental perspective, Laser Materials Processing (LAMP 2007) | 9th January 2007 | National Institute of Technology, Tiruchirappalli |
Type of Membership (Ordinary Member/ Honorary Member / Life Member ) | Organization | Membership No. with date |
---|---|---|
Life Member | The Institution of Engineers (India) | M-136079-5 |
Regular Member | International Society of Automation | 000033823609 |
Life Member | Laser Institute of America | MEM79803 |
Author(s) | Title of Paper | Journal | Volume (No.) | Page numbers | Year | Impact Factor of the Journal (Optional) |
---|---|---|---|---|---|---|
Pradeep, G. V., Muthukannan Duraiselvam, and K. Sivaprasad | Tribological Behavior of Laser Surface Melted γ-TiAl Fabricated by Electron Beam Additive Manufacturing | Journal of Materials Engineering and Performance | 1-12 | 2021 | 1.819 | |
Prabu, G., Muthukannan Duraiselvam, N. Jeyaprakash, and Che-Hua Yang | Microstructural evolution and wear behavior of AlCoCrCuFeNi high entropy alloy on Ti–6Al–4V through laser surface alloying | Metals and Materials International | 27(7) | 2328-2340 | 2021 | 3.642 |
Varatharajulu, M., Muthukannan Duraiselvam, M. Bhuvanesh Kumar, G. Jayaprakash, and N. Baskar | Multi criteria decision making through TOPSIS and COPRAS on drilling parameters of magnesium AZ91 | Journal of Magnesium and Alloys | 2021 | 10.088 | ||
Varatharajulu, M., Muthukannan Duraiselvam, G. Jayaprakash, N. Baskar, P. Karthick, and R. Anbarasu | Modeling and optimization of hole accuracy and drilling time in magnesium az31 plate | Surface Review and Letters | 28 | 2021 | 1.152 | |
Bagade, Vishal Uttamra, Muthukannan Duraiselvam, Niranjan Sarangi, and K. Parthiban | Effect of Laser surface texturing on coating adherence and tribological properties of CuNiIn and MoS2 coating | Transactions of the Indian Institute of Metals | 75 | 239-250 | 2021 | |
Varatharajulu, M., Muthukannan Duraiselvam, K. Arun Kumar, C. Gabrial Kanniyan, and Ramkumar Sathiyamurthy | Experimental Investigation of the Effect of Independent Parameters in the Face Milling of Aluminum 6082 Alloy | Transactions of the Indian Institute of Metals | 74(3) | 659-677 | 2021 | 1.14 |
Anaz Khan, Muhammed, Annakodi Vivek Anand, Muthukannan Duraiselvam, Koppula Srinivas Rao, Ramachandra Arvind Singh, and Subramanian Jayalakshmi | Thermal Shock Resistance and Thermal Insulation Capability of Laser-Glazed Functionally Graded Lanthanum Magnesium Hexaluminate/Yttria-Stabilised Zirconia Thermal Barrier Coating | Materials | 14(14) | 2021 | 3.623 | |
Maideen, A. Haja, Muthukannan Duraiselvam, and M. Varatharajulu | Surface modification of aluminium 7075 by electrical discharge alloying and influence of surface roughness using RSM | Materials Today: Proceedings | 39 | 1440-1449 | 2021 | 0.97 |
Prakash, F. Peter, N. Jeyaprakash, Muthukannan Duraiselvam, G. Prabu, and Che-Hua Yang | Droplet spreading and wettability of laser textured C-263 based nickel superalloy | Surface and Coatings Technology | 397 | 2020 | 4.158 | |
Bagade, Vishal Uttamrao, Muthukannan Duraiselvam, Niranjan Sarangi, and K. Parthiban | Laser Surface Texturing to Enhance CuNiIn Anti-Fretting Coating Adhesion on Ti6Al4V Alloy for Aerospace Application | Lasers in Manufacturing and Materials Processing | 7 | 141-153 | 2020 | 1.24 |
Pradeep G V Krishna, Muthukannan Duraiselvam, Katakam Siva Prasad, and Ashfaq Mohammad | Tribological Behavior of Additive Manufactured γ-TiAl by Electron Beam Melting | Transactions of the Indian Institute of Metals | 73(6) | 1661-1667 | 2020 | 1.14 |
Sokkalingam R, K. Sivaprasad, M. Duraiselvam, V. Muthupandi, and K. G. Prashanth | Novel welding of Al0. 5CoCrFeNi high-entropy alloy: Corrosion behavior | Journal of Alloys and Compounds | 817 | 2020 | 4.17 | |
Jeyaprakash N, Che-Hua Yang, Muthukannan Duraiselvam, and S. Sivasankaran | Comparative study of laser melting and pre-placed Ni–20% Cr alloying over nodular iron surface | Archives of Civil and Mechanical Engineering | 20(1) | 1-12 | 3.46 | |
Sathiyamurthy Ramkumar, Muthukannan Duraiselvam, and P. Sevvel | Acoustic emission based deep learning technique to predict adhesive bond strength of laser processed CFRP composites | FME Transactions | 48(3) | 611-619 | 2020 | 1.37 |
Peter Prakash F, Muthukannan Duraiselvam, S. Natarajan, and K. G. Balamurugan | Laser Microtexturing of NiCrAlY Coated Nickel-based Superalloy for Improved Adhesion Bond Strength | Lasers in Engineering | 46 | 2020 | 0.34 | |
Prakash F. Peter, N. Jeyaprakash, Muthukannan Duraiselvam, G. Prabu, and Che-Hua Yang | Droplet spreading and wettability of laser textured C-263 based nickel superalloy | Surface and Coatings Technology | 397 | 2020 | 3.38 | |
Haja Maideen A, Muthukannan Duraiselvam, and M. Varatharajulu | Surface modification of aluminium 7075 by electrical discharge alloying and influence of surface roughness using RSM | Materials Today: Proceedings | 2020 | 0.97 | ||
Arulbrittoraj A., Gurumoorthy A, Karthikeyan S and Muthukannan Duraiselvam | Study the effect of roller hardness on the surface properties of burnished AISI 1211 steel | International Journal of Computational Materials Science and Surface Engineering | 9(1) | 53-69 | 2020 | 0.17 |
Sathiyamurthy Ramkumar, and Muthukannan Duraiselvam | Selective laser ablation of CFRP composite to enhance adhesion bonding | Materials and Manufacturing Processes | 34 (11) | 1296-1305 | 2019 | 3.69 |
Jeyaprakash N, Che-Hua Yang, Muthukannan Duraiselvam, G. Prabu, Sheng-Po Tseng, and D. Raj Kumar | Investigation of high temperature wear performance on laser processed nodular iron using optimization technique | Results in Physics | 15 | 2019 | 3.28 | |
Anil Kumar K, Natarajan S, Muthukannan Duraiselvam, and S. Ramachandra | Effect of Titanium Dioxide Particles on the Morphology, Mechanical, and Wear Properties of the Aluminum Alloy 3003-Based Composites | Arabian Journal for Science and Engineering | 44 | 10207-10217 | 2019 | 1.47 |
Selvan B M Muthamizh, Veeramani Anandakrishnan, Muthukannan Duraiselvam, and Sivaraj Sundarameenakshi | Wear testing of in situ cast AA8011-TiB2 metal matrix composites | Materials Testing | 61(8) | 779-786 | 2019 | 0.64 |
Karuppasamy S, V. Sivan, S. Natarajan, S P Kumaresh Babu, M. Duraiselvam, and R. Dhanuskodi | "Establishment of Wear Resistant HVOF Coatings for 50CrMo4 Chromium Molybdenum Alloy Steel as an Alternative for Hard Chrome Plating." | Journal of The Institution of Engineers (India): Series C | 100(4) | 635-645 | 2019 | 0.75 |
Anil Kumar K, S. Natarajan, Muthukannan Duraiselvam, and S. Ramachandra | "Synthesis, characterization and mechanical behavior of Al 3003-TiO2 surface composites through friction stir processing." | Materials and Manufacturing Processes | 34(2) | 183-191 | 2019 | 3.69 |
Kumar B. Anil, P. Dinesh Babu, P. Marimuthu, and Muthukannan Duraiselvam | Effect of laser surface texturing on tribological behaviour of grey cast iron | International Journal of Surface Science and Engineering | 13(2-3) | 220-235 | 2019 | 1.21 |
Sathish, S. Anandakrishnan, V Dillibabu, V. Muthukannan, Duraiselvam, Balamuralikrishnan, N | Optimization of Coefficient of Friction for Direct Metal Laser Sintered Inconel 718 | Advances in Manufacturing Technology | 371-379 | 2019 | 2.92 | |
Haja Maideen A, Muthukannan Duraiselvam, and M. Varatharajulu. 72(7) | Application of desirability function approach for optimized process parameters of electrical discharge alloying of Al 7075 with nickel powder | Transactions of the Indian Institute of Metals | 1901-1916 | 2019 | 1.27 | |
Jeyaprakash, N, Che-Hua Yang, Muthukannan Duraiselvam, and G. Prabu | . "Microstructure and tribological evolution during laser alloying WC-12% Co and Cr3C2− 25% NiCr powders on nodular iron surface." | Results in Physics | 12 | 1610-1620 | 2019 | 3.28 |
Peter Prakash F, Muthukannan Duraiselvam, S. Natarajan and Kannan Ganesa Balamurugan | Effect of laser surface texturing on wear resistance of nickel-based superalloy | Industrial Lubrication and Tribology | 2019 | 1.22 | ||
B.K. Narayanan, M. Duraiselvam, S. Natarajan and M. A. Khan | Hot Corrosion and Oxidation Behaviour of a Laser Processed Nickel-based Superalloy | Lasers in Eng. | 1-18 | 2019 | 0.34 | |
N. Jeyaprakash, Muthukannan Duraiselvam, S. V. Aditya | Numerical Modeling Of WC-12% Co Laser Alloyed Cast Iron in High Temperature Sliding Wear Condition Using Response Surface Methodology | Surface Review and Letters | 26(1) | 1-19 | 2019 | 0.77 |
Manikandan, Esakkimuthu, Balakrishnapillai S. Sreeja, Sankararajan Radha, Muthukannan Duraiselvam, Abhishek Gupta, and Shriganesh Prabhu | Microfabrication of terahertz frequency-selective surface by short-and ultrashort laser ablation | Optical Engineering | 58 (1) | 2018 | 1.28 | |
N. Jeyaprakash, M. Duraiselvam, R. Raju | Modelling of Cr3C2-25% NiCr laser alloyed cast iron in high temperature sliding wear condition using response surface methodology | Arch. Metall. Mater. | 63(3) | 1303-1315 | 2018 | 0.69 |
K. Parthiban, Muthukannan Duraiselvam, R.Manivannan | TOPSIS based parametric optimization of laser micro-drilling of TBC coated nickel based superalloy | Optics and Laser Technology | 102 | 32-39 | 2018 | 3.23 |
K. Parthiban, Muthukannan Duraiselvam, Shashank Kumar Jain, Saad Riaz and S. V. Aditya | Numerical Simulation on the Effect of Cooling Hole Configuration on the Film Cooling Effectiveness in TBC Coated Turbine Vanes | Int J Turbo Jet Eng | 2018 | 0.73 | ||
V. Dillibabu, Muthukannan Duraiselvam, S. Natarajan, U. Chandrasekhar, Muhammed Anaz Khan | High Temperature Tribological Characterisation of Laser Nitrided Nickel-Based Superalloy | Transactions of the Indian Institute of Metals | 71(1) | 99–106 | 2018 | 1.27 |
Balamurali Krishnan Narayanan, Muthukannan Duraiselvam, S Natarajan, Muhammed Anaz Khan | Laser material processing of nickel superalloy for improved erosion resistance | Materials and Manufacturing Processes | 32 | 1596-1605 | 2017 | 3.69 |
S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan | Effect of Laser Glazing on Thermo Mechanical Properties of Plasma Sprayed LaTi2Al9O19 Thermal Barrier Coatings | Materials and Manufacturing Processes | 32 | 1573-1580 | 2017 | 3.69 |
Muhammed Anaz Khan, Muthukannan Duraiselvam, S. S. Panwar, Trilochan Jena, S.R. Dhineshkumar | Improvement of strain tolerance of functionally graded TBCs through laser surface micro-texturing | Journal of Materials Science | 52 | 696-708 | 2016 | 2.302 |
S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan | Enhancement of strain tolerance of functionally graded LaTi 2Al9O19 thermal barrier coating through ultra-short pulse based laser texturing | Surface & Coatings Technology | 304 | 263-271 | 2016 | 2.139 |
Mohammed Mohaideen Ferozhkhan, Muthukannan Duraiselvam, Kottaimathan Ganesh Kumar, Rajanbabu Ravibharath | Plasma transferred arc welding of satellite 6 alloy on stainless steel for wear resistance | Procedia Technology | 25 | 1305-1311 | 2016 | |
S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana,Muhammed Anaz Khan | Enhanced ablation resistance through laser glazing of plasma sprayed LaTi2Al9O19-based functionally graded thermal barrier coating | Ceramics International | 42 | 10184-10190 | 2016 | 2.60 |
V. Dillibabu, M. Duraiselvam, U. Chandrasekhar and R. Raju | Microstructural Studies on Laser Dissimilar Welded Ni and Steel Alloys for Aeronautical Turbine Applications | Lasers in Engineering | 1-10 | 2016 | 0.40 | |
A. Arulbrittoraj, P. Padmanabhan, M. Duraiselvam, R. Srinivasan, G. Ebenezer | The effect of sliding wear parameters on carburized AISI1040 steel | Journal of Mechanical Science and Technology | 30 | 1825-1833 | 2016 | 0.761 |
M Adam Khan, S Sundarrajan, M Duraiselvam, S Natarajan, A Senthil Kumar | Sliding wear behaviour of plasma sprayed coatings on nickel based superalloy | Surface Engineering | 1-7 | 2016 | ||
K.E. Sarath Raghavendra Babu and Muthukannan Duraiselvam | Surface nano-texturing of silicon by picosecond laser irradiation through TiO2 nanotube arrays | Applied Surface Science | 353 | 1112 - 1116 | 2015 | 2.71 |
Ramesh Raju, Muthukannan Duraiselvam, Vijay Petley, Shweta Verma, R. Rajendran | Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition | Materials Science and Engineering | 643 | 64-71 | 2015 | 2.88 |
V Senthilkumar, B Thiyagarajan, M Duraiselvam, K Karthick | Effect of thermal cycle on Ni–Cr based nanostructured thermal spray coating in boiler tubes | Transactions of Nonferrous Metals Society of China | 25 | 1533-1542 | 2015 | 1.340 |
M Hashim, Muthukannan Duraiselvam | Enhancing Tribological and Corrosion Resistance of Hastelloy C-276 through Laser Surface Treatment | Materials Science Forum | 830 | 659-662 | 2015 | |
D.Sudhakar, D.Jeyasimman, M.Duraiselvam | Dry Sliding Wear Behavior of Cr3C2-NiCr Coating on Austenitic Stainless Steel | International Journal Of Core Engineering & Management | 12 | 215-225 | 2015 | |
Ramesh Raju, Muthukannan Duraiselvam, Arun G. K | Numerical Finite Element Investigation on Laser Cladding of Aerospace Components | International Journal of Life Cycle Reliability and Safety Engineering | 3-4 | 13-23 | 2014 | |
V. Dillibabu, Muthukannan Duraiselvam, Rahul V. S | Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications | International Journal of Life Cycle Reliability and Safety Engineering | 3-1 | 13-23 | 2014 | |
Ilangovan Arun, P. Vaishnavi, Muthukannan Duraiselvam, V. Senthilkumar, and V. Anandakrishnan | Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance | International Journal of Materials Research | 105 | 544-551 | 2014 | 0.69 |
Illangovan Arun, Muthukannan Duraiselvam, V. Senthilkumar, R. Narayanasamy, V. Anandakrishnan | Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies | Materials and Design | 63 | 257-262 | 2014 | 3.171 |
Muthukannan Duraiselvam, A. Valarmathi, S. M. Shariff, G. Padmanabham | Laser surface nitride Ti–6Al–4V for light weight automobile disk brake rotor application | Wear | 309 | 269-274 | 2014 | 1.862 |
S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam | Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique | Materials and Design | 60 | 184-192 | 2014 | 3.171 |
S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, S. Raghuraman, V. M. Illayaraja Muthaiyaa | Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC metal matrix composites | Applied Mechanics and Materials | 541-542 | 258-262 | 2014 | |
S. Baskaran, B. M. Muthamizh Selvan, V. Anandakrishnan, R. Venkatraman, Muthukannan Duraiselvam | Effect of Heat Treatment on Wear Behaviour of Hot Extruded AA7075-4% TiC in-situ metal matrix composite | Applied Mechanics and Materials | 541-542 | 263-267 | 2014 | |
S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam | Statistical Analysis of Dry Sliding Wear of Graphite Reinforced Aluminium MMCs | Procedia Materials Science | 6 | 1110-1120 | 2014 | |
Rajesh Siriyala, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam | Multi-response optimization of tribological characteristics of aluminium MMCs using PCA | International Journal of Multidiscipline Modeling in Material and Structures | 10 | 276-287 | 2014 | |
A Parthiban, R Ravikumar, H Abdul Zubar, M Duraiselvam | Experimental investigation of CO2 laser cutting on AISI 316L sheet | Journal of Scientific & Industrial Research | 73 | 2014 | 0.385 | |
S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam | , “Statistical Modeling and Analysis of Dry Sliding Wear of SiC Reinforced Aluminium MMCs”, | International Journal of Surface Engineering and Interdisciplinary Material Science | 1 | 57-90 | 2013 | |
M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu, V.Muthupandi, K.Sivaprasad, K.R. Rajith | Tribological studies on laser surface melted Hastelloy C-276 | Surface Engineering | 2013 | 1.51 | ||
M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu | Improvement of wear resistance of Hastelloy C-276 through laser surface melting | Materials and Design | 46 | 546-551 | 2013 | 3.171 |
N.L. Parthasarathi, Muthukannan Duraiselvam, Utpal Borah | Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads | Materials and Design | 36 | 141-151 | 2012 | 3.171 |
G.M. Balamurugan, Muthukannan Duraiselvam, V. Anandakrishnan | Comparison of high temperature wear behaviour of plasma sprayed WC–Co coated and hard chromium plated AISI 304 austenitic stainless steel | Materials and Design | 35 | 640-646 | 2012 | 3.171 |
Rajesh Siriyala, Gopala Krishna Alluru, Rama Murthy Raju Penmetsa, Muthukannan Duraiselvam | , “Application of grey-taguchi method for optimization of dry sliding wear properties of aluminum MMCs”, | Frontiers in Mechanical Engineering | 7 | 279-287 | 2012 | |
C. Anand Chairman, S. P. Kumaresh Babu, Muthukannan Duraiselvam, K.R.Balasubramanian | Investigation on two-body abrasive wear behavior of titanium carbide filled glass fabric-epoxy composites- a Box-Behnken approach | International Journal of Engineering, Science and Technology | 3 | 119-129 | 2011 | |
M. Prince, P. Gopalakrishnan, M. Duraiselvam, S. Natarajan | Dry Sliding Wear Behavior of HVOF Sprayed Molybdenum and Nickel/Chromium Coatings | International Journal of Applied Engineering Research | 5 | 75-86 | 2010 | |
Muthukannan Duraiselvam, N.L. Parthasarathi | Dry sliding wear behavior of NiCrBSiCFe Plasma coating on austenitic stainless steel | Journal of Manufacturing Engineering | 5 | 118-123 | 2010 | |
Balamurugan G M, Muthukannan Duraiselvam, Subramaniam Arunachalam | Sliding wear behaviour of AISI 304 austenitic stainless steel at elevated temperature | Journal of Manufacturing Engineering | 5 | 137-142 | 2010 | |
Balamurugan G M, Muthukannan Duraiselvam | Influence of temperature on the wear behaviour of WC-Co plasma sprayed AISI 304 austenitic stainless steel | Computer Modelling and New Technologies | 14 | 30-40 | 2010 | |
N.L. Parthasarathi, Muthukannan Duraiselvam | Effect of sliding velocity and plasma spraying parameters on wear resistance of NiCrBSiCFe plasma sprayed on austenitic stainless steel at high temperature | Computer Modelling and New Technologies | 14 | 17-29 | 2010 | |
N.L. Parthasarathi, Muthukannan Duraiselvam | Improvement of high temperature wear resistance of AISI 316 ASS through NiCrBSiCFe plasma spray coating | Journal of Minerals and Materials Characterization and Engineering | 9 | 653-670 | 2010 | |
N. L. Parthasarathi, Muthukannan Duraiselvam | High temperature tribological properties of NiCrBSiCFe plasma-sprayed coating on austenitic stainless-steel substrate | Journal of Alloys and Compounds | 505 | 824-831 | 2010 | 2.726 |
M. Prince, P. Gopalakrishnan, Muthukannan Duraiselvam, S. Natarajan | Study of Dry sliding wear of Plasma Sprayed Mo-Ni/Cr - Ti-6Al-4V Tribo Pair | European Journal of Scientific Research | 37 | 41-48 | 2009 | |
Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran | Cavitation erosion resistance of Ti-6Al-4V laser alloyed with TiC-reinforced dual phase intermetallic matrix composites | Materials Science and Engineering | 454-455 | 63-68 | 2007 | 2.409 |
Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike | Study of liquid impact erosion in B2-NiTi and Ti3Al Based intermetallic matrix composites on laser alloyed Ti-6Al-4V | Advanced Engineering Materials | 9 | 171-176 | 2007 | 1.508 |
Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike | Investigation of hydro-abrasive erosion of laser alloyed nickel and titanium based intermetallic matrix composites with TiC reinforcement | Surface Engineering | 23 | 425-430 | 2007 | 1.51 |
Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller | Cavitation erosion resistance of AISI 420 martensitic stainless-steel laser-clad with nickel aluminide intermetallic composites and matrix composites with TiC reinforcement | Surface and Coatings Technology | 201 | 1289-1295 | 2006 | 2.199 |
Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran | Improvement of the cavitation erosion resistance of Ti-6Al-4V through laser alloying titanium aluminide based intermetallic matrix composites | Lasers in Engineering | 16 | 423-436 | 2006 | 0.298 |
Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike | Liquid impact erosion characteristics of martensitic stainless-steel laser clad with Ni-based intermetallic composites and matrix composites | Wear | 261 | 1140-1149 | 2006 | 1.862 |
Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike | Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance | Journal of Laser Applications | 18 | 297-304 | 2006 | |
Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike | Particle-laden liquid impact erosion characteristics of laser clad Ni-based intermetallic matrix composites with TiC and WC reinforcements | Lasers in Engineering | 15 | 355-373 | 2005 | 0.298 |
R. Narayanasamy, Muthukannan Duraiselvam | CAD/CAM of streamlined extrusion Dies | Journal of the Institution of Engineers Singapore | 40 | 35-39 | 2000 | |
Muthukannan Duraiselvam, G. Buvanashekaran, A. Noorul Haq | Wear resistance enhancement through laser surface alloying - an overview | Metals Materials and Processes | 17 | 14-160 | 2005 | |
Muthukannan Duraiselvam, R. Narayanasamy | A knowledge-based system for process sequence design in deep drawing operation | Metals Materials and Processes | 12 | 63-68 | 2000 |
Author(s) | Title of Abstract/ Paper | Title of the Proceedings | Page numbers | Conference Theme | Venue | Year |
---|---|---|---|---|---|---|
Pitchaikani Selvaraj, Muthukannan Duraiselvam | Evaluation of impacting parameters of Thermal Interface Materials for Thermoelectric generator in waste heat power generation | I-DAD 2020 | Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science & Technology, Chennai | 2020 | ||
Panneer Selvam R, Muthukannan Duraiselvam, Sanjay G. Barad, and Dilip Kumar | Dynamic Characterization of an Additive Manufactured Turbine Wheel of Turbocharger | In Gas Turbine India Conference, American Society of Mechanical Engineers | 2019 | |||
Panneer Selvam R, Muthukannan Duraiselvam, Sanjay G. Barad, and T. N. Suresh | Process Qualification and Evaluation of a Metal Rapid Prototype Turbine Blisk Through Dynamic Spin Testing | International Conference on Advanced Materials and Processes for Defence Applications (ADMAT 2019) | DMRL, DRDO, Hyderabad | 2019 | ||
Pitchaikani Selvaraj, Muthukannan Duraiselvam, Krishnadass Karthick | Effect of HST for optimising the electric array configuration of the TEG system | IMME 19 | National Institute of Technology, Trichy | 2019 | ||
R. Ravichandran, Muthukannan Duraiselvam, F. Peter Prakash |
Effect of Tribological Behaviours On Laser Surface Textured Hard Forged Steel | International Conference on Recent Developments in Mechanical Engineering | Chennai, India | 2019 | ||
Ramesh Raju, Muthukannan Duraiselvam, N. Manikandan, N. Jeyaprakash S. R. Dhinesh Kumar | Processing Optimization of Multiple Quality Characteristics on Electrical Discharge Machining Of Haste Alloy Using TOPSIS | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
R. Dinesh Kumar K. Ganesa Balamurugan, S. Muthukumaran Muthukannan Duraiselvam | A Study on The Effect of Process Parameters on Mechanical Property of Friction Stir Additive Manufactured Al1100 Aluminium Plates | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
Arulbrittoraj, P. Padmanabhan, Muthukannan Duraiselvam, M. Pandikumar | Study on Abrasive Wear Behaviour of Pack Borided AISI 1040 Steel | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
G.V.Krishna Pradeep, Muthukannan Duraiselvam, B.Devaraj Naik | Tool Wear Measurement Of Multipoint Triangular Milling Insert | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
N.Jeyaprakash, Muthukannan Duraiselvam, Deep Chakravorty, Ramesh Raju, S. R. Dhinesh Kumar, G. Prabu | Microstructure And Wear Resistance Enhancement Of Nodular Cast Iron By Laser Surface Melting | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
S.R. Dhinesh Kumar,Muthukannan Duraiselvam, N Manikandan, N. Jeyaprakash, Ramesh Raju | Investigations On Laser Glazing Of Lanthanum Based TBCs Using Taguchi Approach | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
M. Gunasekhar Reddy, Muthukannan Duraiselvam | Mechanical Characterization of Epoxy-Glass/Poly Propylene Fiber Reinforced Composite | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
S. Ramkumar, Muthukannan Duraiselvam | A Combined Artificial Neural Network and Acousto-Ultrasonic Approach Towards Prediction of Tensile Strength Of Glass Fiber Reinforced Composite | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
Uthirapathi, D. Lenin Singaravelu, Muthukannan Duraiselvam | Experimental Investigation on Machining of Ti-6Al-4V Alloy Using Powder Mixed Electrical Discharge Machining | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
Balamurali Krishnan Narayanan, Muthukannan Duraiselvam, G. Prabu | The Effect of Micro-Shapes of Laser Surface Texture on The Corrosion Behavior of Nickel Based Superalloy | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
G. Prabu, Muthukannan Duraiselvam, N. Jeyaprakash, S. R. Dhinesh Kumar | Wear Behaviour Of Partially Dissolved Graphite Cast Iron Using Laser Surface Melting in Corrosive Medium | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
M. Ravi Kumar, Muthukannan Duraiselvam, S. Natarajan | A Study of Erosive Wear of Intermediate Plate in Beater Wheel Mill by Pulverized Lignite Fuel | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
A. Haja Maideen, Muthukannan Duraiselvam, V. Anandakrishnan | Experimental investigation and optimization of electrical discharge alloying of Al 7075 alloy with Nickel powder | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
M. Periya karuppan, Muthukannan Duraiselvam, | Critical Factors for Implementation of Lean In Indian Government Sectors | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
R Ravichandran, Muthukannan Duraiselvam and Natarajan S | Laser Hardening of Wheel Surface for Rail Wheel Contact of LHB Coaches to reduce the problem of Wheel Shelling | CDAMIES 2018 | National Institute of Technology, Tiruchirappalli | 2018 | ||
S.V. Aditya, Muthukannan Duraiselvam, K. Parthiban, Vishal Bagade | Simulation on the effect of laser surface texturing in enhancing bond strength of thermal barrier coating | International Conference on Design and Manufacturing IConDM-2016 | 67-71 | Chennai, India. | 2016 | |
S.V. Aditya, Muthukannan Duraiselvam, K. Parthiban, Vishal Bagade | Laser Surface Texturing of Nickel Superalloy to Improve Adhesion Bond Strength of Thermal Barrier Coating | International conference on Engineering & Technology, Computer, Basic & Applied Science ECBA-2016 | Sydney, Australia | 2016 | ||
K.E. Sarath Raghavendra Babu, L. Manikanta Reddy, Muthukannan Duraiselvam | Surface Micro-texturing of Silicon by Picosecond Laser to Enhance Antireflection Effect | International Conference on Application of Lasers in Manufacturing 2015 | New Delhi, India | 2015 | ||
Ramesh Raju, Muthukannan Duraiselvam, Arun G. K. | Finite Element Modeling and Experimental Investigation of Laser Clad Inconel 718 for Aerospace Structural Materials | International Conference on Application of Lasers in Manufacturing 2015 | New Delhi, India | 2015 | ||
S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, N. Keerthivasan | A study on dry sliding friction behavior of TiC reinforced AA7075 in-situ composites by Taguchi technique | 2nd IRF International Conference | 1-4 | Singapore | 2014 | |
Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, Vijay Petley, Shweta Verma, Rajendran R | Mechanical and metallurgical characterization of laser metal deposited aero-engine blade materials | 28th International Conference on Surface Modification Technologies, | Tampere University of Technology, Tempere, Finland. | 2014 | ||
Duraiselvam M, Ramesh, Sai Balagi T. S, Ranajyoti Dutta, Sai Prashanth T. S, Vamshi Krishna | Optimization of Process Parameters for Laser Surface Cladding using Geometric Programming | International Mechanical Engineering Congress 2014 | National Institute of Technology: Tiruchirappalli | 2014 | ||
Ramesh Raju, Muthukannan Duraiselvam, Arun G. K | Numerical Finite Element Investigation on Laser Cladding of Aerospace Components | International Conference on Reliability and Safety Engineering | Anna University – BIT Campus, Tamilnadu, India | 2014 | ||
V. Dillibabu, Muthukannan Duraiselvam, Rahul V. S | Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications | International Conference on Reliability and Safety Engineering | Anna University – BIT Campus, Tamilnadu, India | 2014 | ||
M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam,Harshad Natu | A comparative study of laser surface treated Hastelloy C-276 in argon and nitrogen atmosphere | Second International Conference on Advances in Materials Processing and Characterisation | Anna University, Chennai, India | 2013 | ||
Muthukannan Duraiselvam, G. M. Balamurugan | Tribological analysis of AISI 304 Austenitic stainless steel at high temperature | International Conference on Advances in Mechanical and Computer Engineering (ICAMCE-2013) | Haryana, India | 2013 | ||
Rajesh. S, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam | Statistical Analysis of Wear Characteristics of Aluminum Metal Matrix Composites | , International Conference on Intelligent Manufacturing Systems (ICIMS 2012) | SASTRA University, Tamilnadu, India | 2012 | ||
Muthukannan Duraiselvam, S.M. Shariff, G. Padmanabham | ,Application of laser surface engineering in power generation and automobile industries | Asia Pacific Interfinish 2010 | Singapore | 2010 | ||
N. L. Parthasarathi, Muthukannan Duraiselvam, G. M. Balamurugan | Influence of temperature in dry sliding wear of AISI 316 austenitic stainless steel | Advances in Materials, Mechanics and Management | College of Engineering Trivandrum, Kerala, India | 2010 | ||
Muthukannan Duraiselvam, More Satish Dashrathrao, Naveen R, S. Natarajan | Simulation and Analysis of Dry Sliding Wear of Automobile Brake pad – Ti-6Al-4V disc pair using Finite Element Method | International Conference on Latest Trends in Simulation Modelling and Analysis (COSMA 2009) | 461-464 | NIT Calicut, Kerala, India | 2009 | |
Muthukannan Duraiselvam, R. Naveen, S. Natarajan, More Satish | Wear analysis of Ti6Al4V alloy - brake pad pair for automobile/aircraft disc brakes at elevated temperatures | Surface Modification Technologies, SMT 23 | 339-343 | Mamallapuram, India | 2009 | |
G. M. Balamurugan, Muthukannan Duraiselvam , N. L. Parthasarathi | Sliding wear behaviour of WC-Co plasma sprayed coating on AISI 304 steel at room temperature | India-Japan conference on Advances in materials processing | Annamalai University, Chidambaram, India | 2009 | ||
N. L. Parthasarathi, Muthukannan Duraiselvam, G. M. Balamurugan | Dry sliding wear behaviour of plasma sprayed NiCrBSi coating on AISI 316 steel at room temperature | India-Japan conference on Advances in materials processing | Annamalai University, Chidambaram, India | 2009 | ||
Hemalatha Thiagarajan, M. Duraiselvam, Srisankaraswaminathan J. V | Integration of aggregate production planning and distribution optimization using ACO with fuzzy forecasting | 6th International Conference on Supply Chain management and Information Systems (SCIMS 2008) | National Institute of Technology, Tiruchirappalli, India. | 2008 | ||
Muthukannan Duraiselvam, N.L. Parthasarathi | Experimental Investigations of the impact of laser process parameters on the microstructural outcome | International Conference of Fascinating Advancements in Mechanical Engineering (FAME 08) | 509-511 | Sivakasi, India | 2008 | |
Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike | Correlation of liquid impact erosion resistance of laser alloyed nickel and titanium based intermetallic matrix composites with instrumented indentation-derived properties | Surface Modification Technologies, SMT 22 | 321-327 | Trollhattan, Sweden | 2008 | |
V. Sivaraman, M. Duraiselvam, S. Ananthakumar, R. Krishnamurthy | Ultrasonic machining of ZrO2/Al2TiO5 ceramic composites | IISc Centenary-International Conference on Advances in Mechanical Engineering, IC-ICAME | Bangalore, India | 2008 | ||
N.L. Parthasarathi and M. Duraiselvam | Process Parameter Optimization Involved in Laser Cladding of AISI 420 Martensitic Stainless Steel | International Conference on Advanced Manufacturing Technology | Central Mechanical Engineering Research Institute Manufacturing Technology & Foundry Groups, Durgapur, India | 2007 | ||
M. Duraiselvam | Experimental Investigations of the Impact of Laser Process Parameters on the Microstructural Outcome | International Conference on Advanced Manufacturing Technology | Central Mechanical Engineering Research Institute Manufacturing Technology & Foundry Groups, Durgapur, India | 2007 | ||
V. Sivaraman, M. Duraiselvam | Influence of Nano-Coating on Cutting Tools | International Conference on Advanced Materials and Composites, | National Institute for Interdisciplinary Science & Technology (NIIST), CSIR Thiruvananthapuram, India | 2007 | ||
Muthukannan Duraiselvam, R.Galun, V.Wesling, B.L. Mordike | Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance | 24th International Congress on Applications of Lasers and Electro-Optics ICALEO | 611-620 | Miami, Florida, USA | 2005 | |
Muthukannan Duraiselvam, G. Buvanashekaran, A. Noorulhaq | Laser surface alloying of SiC coating on AISI 430 Ferritic stainless steel | International Conference on Advances in Surface Treatment: Research and Applications (ASTRA) | 213-217 | Hyderabad, India | 2003 | |
G. Buvanashekaran, Muthukannan Duraiselvam, A. Noorulhaq Hyderabad, India. | Laser surface modification technique to improve metallurgical properties of AISI 304 stainless steel | International Conference on Advances in Surface Treatment: Research and Applications (ASTRA) | 229-234 | Hyderabad, India | 2003 | |
Muthukannan Duraiselvam, G. Buvanashekaran, A. Noorulhaq | Analysis of laser surface alloying using factorial experiment design- A case study | National conference on modeling and analysis of production systems (MAPS), | Tiruchirappalli, India |
Author(s) | Title of Book/Monograph | Name of Publishers | Year of Publication | ISSN/ISBN Number |
---|---|---|---|---|
K. Ganesa Balamurugan, Dr. M. Duraiselvam | Effect of Laser Scan Speed on Microstructure and Microhardness on Titanium Clad Magnesium, Recent Advances in Manufacturing, Automation, Design and Energy Technologies, Proceedings from ICoFT | Springer | 2021 | 2195-4356 |
A. Arockiarajan, Dr. M. Duraiselvam, Ramesh Raju | Advances in Industrial Automation and Smart Manufacturing - Select Proceedings of ICAIASM 2019 | Springer | 2019 | ISBN 978-981-15-4738-6 |
Dr. M. Duraiselvam | Laser Surface Engineering for Turbine Industries, | VDM Verlag Dr. Muller GmbH & Co.KG | 2011 | ISBN 978-3639287837 |
M. Adam Khan, D. Chellaganesh, M. Uthayakumar, J. T. Winowlin Jappes, Muthukannan Duraiselvam Book chapter | Electrochemical Behaviour and Surface Studies on Austenitic Stainless Steel and Nickel-Based Superalloy Dissimilar Weld Joints in Materials Forming, Machining and Post Processing | Springer | 2019 | |
Muthukannan Duraiselvam Book chapter | Laser surface modification of metals for liquid impingement erosion resistance in Laser Surface Modification of Alloys for Corrosion and Erosion Resistance | Woodhead Publishing | 2012 |
Dr.-Ing. M. Duraiselvam
Professor
Department of Production Engineering
National Institute of Technology
Tiruchirappalli- 620 015
Tamilnadu, India
Ph: +91-431-2503509
Fax: +91-431-2500133
Email: durai@nitt.edu