International Journal

  1. N. Jeyaprakash, Muthukannan Duraiselvam, S. V. Aditya,” Numerical Modeling Of WC-12% Co Laser Alloyed Cast Iron In High Temperature Sliding Wear Condition Using Response Surface Methodology”, Surface Review and Letters Vol. 26, No. 1 (2019) 1950009.
  2. N. Jeyaprakash, M. Duraiselvam, R. Raju,” Modelling of Cr3C2-25% NiCr laser alloyed cast iron in high temperature sliding wear condition using response surface methodology”, Arch. Metall. Mater. 63 (2018), 3, 1303-1315
  3. K.Parthiban, Muthukannan Duraiselvam, R.Manivannan,” TOPSIS based parametric optimization of laser micro-drilling of TBC coated nickel based superalloy”, Optics and Laser Technology 102 (2018) 32-39.
  4. K. Parthiban, Muthukannan Duraiselvam, Shashank Kumar Jain, Saad Riaz and S. V. Aditya”, Numerical Simulation on the Effect of Cooling Hole Configuration on the Film Cooling Effectiveness in TBC Coated Turbine Vanes”, Int J Turbo Jet Eng (2018).
  5. V. Dillibabu, Muthukannan Duraiselvam, S. Natarajan, U. Chandrasekhar, Muhammed Anaz Khan,” High Temperature Tribological Characterisation of Laser Nitrided Nickel-Based Superalloy” Trans Indian Inst Met (2018) 71(1):99–106
  6. B.K. Narayanan, M. Duraiselvam, S. Natarajan and M. A. Khan”, Hot Corrosion and Oxidation Behaviour of a Laser Processed Nickel-based Superalloy”, Int. Journ. of Lasers in Eng., (2018) 1-18.
  7. Balamurali Krishnan Narayanan, Muthukannan Duraiselvam, S Natarajan, Muhammed Anaz Khan, "Laser material processing of nickel superalloy for improved erosion resistance", Materials and Manufacturing Processes 32 (2017) 1596-1605.
  8. S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan, “Effect of Laser Glazing on Thermo Mechanical Properties of Plasma Sprayed LaTi2Al9O19 Thermal Barrier Coatings”, Materials and Manufacturing Processes 32 (2017) 1573-1580.
  9. Muhammed Anaz Khan, Muthukannan Duraiselvam, S. S. Panwar, Trilochan Jena, S. R.
  10. Dhineshkumar, “Improvement of strain tolerance of functionally graded TBCs through laser surface micro-texturing”, Journal of Materials Science 52 (2016) 696-708.
  11. S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan, “Enhancement of strain tolerance of functionally graded LaTi 2Al9O19 thermal barrier coating through ultra-short pulse based laser texturing”, Surface & Coatings Technology 304 (2016) 263-271.
  12. Mohammed Mohaideen Ferozhkhan, Muthukannan Duraiselvam, Kottaimathan Ganesh Kumar, Rajanbabu Ravibharath, “ Plasma transferred arc welding of satellite 6 alloy on stainless steel for wear resistance”, Procedia Technology 25 (2016) 1305-1311.
  13. S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana,Muhammed Anaz Khan, “Enhanced ablation resistance through laser glazing of plasma sprayed LaTi2Al9O19-based functionally graded thermal barrier coating”, Ceramics International 42 (2016) 10184 – 10190.
  14. V. Dillibabu, M. Duraiselvam, U. Chandrasekhar and R. Raju, “Microstructural Studies on Laser Dissimilar Welded Ni and Steel Alloys for Aeronautical Turbine Applications”, Lasers in Engineering (2016) 1-10.
  15. A. Arulbrittoraj, P. Padmanabhan, M. Duraiselvam, R. Srinivasan, G. Ebenezer, “The effect of sliding wear parameters on carburized AISI1040 steel”, Journal of Mechanical Science and Technology 30 (2016) 1825-1833. Impact Factor – 0.761
  16. M Adam Khan, S Sundarrajan, M Duraiselvam, S Natarajan, A Senthil Kumar, “Sliding wear behaviour of plasma sprayed coatings on nickel based superalloy”, Surface Engineering (2016) 1-7. ISSN: 0267-0844
  17. K.E. Sarath Raghavendra Babu and Muthukannan Duraiselvam, “Surface nano-texturing of silicon by picosecond laser irradiation through TiO2 nanotube arrays”, Applied Surface Science 353 (2015) 1112 - 1116.
  18. Ramesh Raju, Muthukannan Duraiselvam, Vijay Petley, Shweta Verma, R. Rajendran,
  19. “Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition”, Materials Science and Engineering A 643 (2015) 64-71.
  20. V Senthilkumar, B Thiyagarajan, M Duraiselvam, K Karthick, “Effect of thermal cycle on Ni–Cr based nanostructured thermal spray coating in boiler tubes”, Transactions of Nonferrous Metals Society of China 25 (2015) 1533-1542.
  21. M Hashim, Muthukannan Duraiselvam, “Enhancing Tribological and Corrosion Resistance of Hastelloy C-276 through Laser Surface Treatment”, Materials Science Forum 830 (2015) 659-662.
  22. D.Sudhakar , D.Jeyasimman , M.Duraiselvam, “Dry Sliding Wear Behavior of Cr3C2-NiCr Coating on Austenitic Stainless Steel”, International Journal Of Core Engineering & Management 12 (2015) 215-225.
  23. Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, “Numerical Finite Element Investigation on Laser Cladding of Aerospace Components”, International Journal of Life Cycle Reliability and Safety Engineering 3-4 (2014) 13 - 23. ISSN: 2250-0820
  24. V. Dillibabu, Muthukannan Duraiselvam, Rahul V. S, “Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications”, International Journal of Life Cycle Reliability and Safety Engineering 3-1 (2014) 13 - 23. ISSN: 2250-0820
  25. Ilangovan Arun, P. Vaishnavi, Muthukannan Duraiselvam, V. Senthilkumar, and V. Anandakrishnan, “Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance”, International Journal of Materials Research 105 (2014) 544-551. ISSN: 1862-5282.
  26. Illangovan Arun, Muthukannan Duraiselvam, V. Senthilkumar, R. Narayanasamy, V. Anandakrishnan, “Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies”, Materials and Design 63 (2014) 257–262. ISSN: 0261-3069.
  27. Muthukannan Duraiselvam, A. Valarmathi, S. M. Shariff, G. Padmanabham, “Laser surface nitride Ti–6Al–4V for light weight automobile disk brake rotor application”, Wear 309 (2014) 269–274. ISSN: 0043-1648, Impact Factor - 1.862
  28. S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, “Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique”, Materials and Design 60 (2014) 184–192. ISSN: 0261-3069.
  29. S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, S. Raghuraman, V. M. Illayaraja Muthaiyaa, “Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC metal matrix composites”, Applied Mechanics and Materials 541-542 (2014) 258–262.
  30. S. Baskaran, B. M. Muthamizh Selvan, V. Anandakrishnan, R. Venkatraman, Muthukannan Duraiselvam, “Effect of Heat Treatment on Wear Behaviour of Hot Extruded AA7075-4% TiC in-situ metal matrix composite”, Applied Mechanics and Materials 541-542 (2014) 263–267.
  31. S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Statistical Analysis of Dry Sliding Wear of Graphite Reinforced Aluminium MMCs”, Procedia Materials Science 6 (2014) 1110-1120. ISSN: 2211-8128
  32. Rajesh Siriyala, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Multi-response optimization of tribological characteristics of aluminium MMCs using PCA”, International Journal of Multidiscipline Modeling in Material and Structures 10 (2014) 276-287.
  33. A Parthiban, R Ravikumar, H Abdul Zubar, M Duraiselvam, “Experimental investigation of CO2 laser cutting on AISI 316L sheet”, Journal of Scientific & Industrial Research 73 (2014) 387.
  34. S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Statistical Modeling and Analysis of Dry Sliding Wear of SiC Reinforced Aluminium MMCs”, International Journal of Surface Engineering and Interdisciplinary Material Science 1 (2013) 57-90. (
  35. M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu,
  36. V.Muthupandi, K.Sivaprasad, K.R. Rajith, “Tribological studies on laser surface melted Hastelloy C-276”, Surface Engineering (2013), DOI: 10.1179/1743294413Y.0000000145 ISSN: 0267-0844.
  37. M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu, “Improvement of wear resistance of Hastelloy C-276 through laser surface melting”, Materials and Design 46 (2013) 546-551. ISSN: 0261-3069.
  38. N.L. Parthasarathi, Muthukannan Duraiselvamb, Utpal Borah, “Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads”, Materials and Design 36 (2012) 141–151. ISSN: 0261-3069.
  39. G.M. Balamurugan, Muthukannan Duraiselvam, V. Anandakrishnan, “Comparison of high temperature wear behaviour of plasma sprayed WC–Co coated and hard chromium plated AISI 304 austenitic stainless steel”, Materials and Design 35 (2012) 640–646. ISSN: 0261-3069.
  40. Rajesh Siriyala, Gopala Krishna Alluru, Rama Murthy Raju Penmetsa, Muthukannan Duraiselvam, “Application of grey-taguchi method for optimization of dry sliding wear properties of aluminium MMCs”, Frontiers in Mechanical Engineering 7 (2012) 279-287.
  41. C. Anand Chairman, S. P. Kumaresh Babu, Muthukannan DuraiSelvam, K.R.Balasubramanian, “Investigation on two-body abrasive wear behavior of titanium carbide filled glass fabric-epoxy composites- a Box-Behnken approach”, International Journal of Engineering, Science and Technology 3 (2011) 119-129.
  42. M. Prince, P. Gopalakrishnan, M. Duraiselvam, S. Natarajan, “Dry Sliding Wear Behavior of HVOF Sprayed Molybdenum and Nickel/Chromium Coatings”, International Journal of Applied Engineering Research 5 (2010) 75-86.
  43. Muthukannan Duraiselvam, N.L. Parthasarathi, “Dry sliding wear behavior of NiCrBSiCFe Plasma coating on austenitic stainless steel”, Journal of Manufacturing Engineering 5 (2010) 118-123.
  44. Balamurugan G M , Muthukannan Duraiselvam, Subramaniam Arunachalam, Sliding wear behaviour of AISI 304 austenitic stainless steel at elevated temperature”, Journal of Manufacturing Engineering 5 (2010) 137-142.
  45. Balamurugan G M , Muthukannan Duraiselvam, “Influence of temperature on the wear behaviour of WC-Co plasma sprayed AISI 304 austenitic stainless steel”, Computer Modelling and New Technologies 14 (2010) 30-40.
  46. N.L. Parthasarathi, Muthukannan Duraiselvam, “Effect of sliding velocity and plasma spraying parameters on wear resistance of NiCrBSiCFe plasma sprayed on austenitic stainless steel at high temperature”, Computer Modelling and New Technologies 14 (2010) 17-29.
  47. N.L. Parthasarathi, Muthukannan Duraiselvam, “Improvement of high temperature wear resistance of AISI 316 ASS through NiCrBSiCFe plasma spray coating”, Journal of Minerals and Materials Characterization and Engineering 9 (2010) 653-670.
  48. N.L. Parthasarathi, Muthukannan Duraiselvam, “High temperature tribological properties of NiCrBSiCFe plasma-sprayed coating on austenitic stainless steel substrate, Journal of Alloys and Compounds 505 (2010) 824–831. ISSN: 0925-8388.
  49. M. Prince, P. Gopalakrishnan, Muthukannan Duraiselvam, S. Natarajan, “Study of Dry sliding wear of Plasma Sprayed Mo-Ni/Cr - Ti-6Al-4V Tribo Pair”, European Journal of Scientific Research 37 (2009) 41-48.
  50. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Cavitation erosion resistance of Ti-6Al-4V laser alloyed with TiC-reinforced dual phase intermetallic matrix composites”, Materials Science and Engineering A 454-455 (2007) 63-68. ISSN: 0921-5093.
  51. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Study of liquid impact erosion in B2-NiTi and Ti3Al Based intermetallic matrix composites on laser alloyed Ti-6Al-4V”, Advanced Engineering Materials 9 (2007) 171-176. ISSN: 1438-1656.
  52. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Investigation of hydro-abrasive erosion of laser alloyed nickel and titanium based intermetallic matrix composites with TiC reinforcement”, Surface Engineering 23 (2007) 425-430. ISSN: 0267-0844.
  53. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, “Cavitation erosion resistance of AISI 420 martensitic stainless steel laser-clad with nickel aluminide intermetallic composites and matrix composites with TiC reinforcement”, Surface and Coatings Technology 201 (2006) 1289-1295. ISSN: 0257-8972.
  54. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Improvement of the cavitation erosion resistance of Ti-6Al-4V through laser alloying titanium aluminide based intermetallic matrix composites”, Lasers in Engineering 16 (2006) 423-436. ISSN: 0898-1507.
  55. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Liquid impact erosion characteristics of martensitic stainless steel laser clad with Ni-based intermetallic composites and matrix composites”, Wear 261 (2006) 1140-1149. ISSN: 0043-1648.
  56. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, “Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance”, Journal of Laser Applications 18 (2006) 297-304.
  57. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Particle-laden liquid impact erosion characteristics of laser clad Ni-based intermetallic matrix composites with TiC and WC reinforcements”, Lasers in Engineering 15 (2005) 355-373. ISSN: 0898-1507.
  58. R. Narayanasamy, Muthukannan Duraiselvam, “CAD/CAM of streamlined extrusion Dies” ,Journal of the Institution of Engineers Singapore 40 (2000) 35-39.