Publications
(A) Refereed Research Journals:
Sl.No |
Title of Publications |
Type of Paper |
Journal/Proceedings |
Authors |
Vol/Year/ Page No |
---|---|---|---|---|---|
1 |
Tribological studies of glass filled Nylon 6 composites in self-mated contacts and against AISI D2 steel disc |
Conference |
Materials Today |
SudhirKumar, D.Jafrey DanielJames, K.Panneerselvam and Barnik Saha Roy |
44, 2021, 1939-1943 |
2 |
Experimental investigation and multi response optimization of turning process parameters for Inconel 718 using TOPSIS approach |
Conference |
Materials Today |
R.Thirumalai, M.Seenivasan and K.Panneerselvam |
45, 2021, 467-472 |
3 |
A comparative assessment in sequential μ-drilling of Hastelloy-X using laser in combination with μ-EDM and μ-ECM |
Article |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
Sivaprasad P.V.; Panneerselvam K.; Noorul Haq A. |
43, 2021 |
4 |
Manufacturing and Characterization of Tungsten Particulate-Reinforced AW106 Epoxy Resin Composites |
Article |
Transactions of the Indian Institute of Metals |
E.JensonJoseph K.Panneerselvam |
74, 2021, 817-825 |
5 |
Investigation on the influence of tungsten particulate in mechanical and thermal properties of HD50MA180 high density polyethylene composites |
Article |
Materials Research Express |
Jenson Joseph E and K Panneerselvam |
7, 2020 |
6 |
Process parameters optimization for friction vibration joining of polypropylene/spheri glass composites using topsis |
Article |
Surface Review and Letters |
D. JAFREY DANIEL and K.PANNEERSELVAM |
27, 2020 |
7 |
Joining of PEEK plates by friction stir welding process |
Conference |
Materials Today |
J. VinodhJose K.Panneerselvam |
39, 2020, 1635-1639 |
8 |
Effect of particulate fillers on mechanical, metallurgical and abrasive behavior of tungsten reinforced HDPE composites: A Taguchi approach |
Conference |
Materials Today |
E.Jenson Joseph K.Panneerselvam |
39, 2020, 1228-1234 |
9 |
Experimental investigation and optimization of abrasive wear characteristics of polypropylene nanocomposites |
Article |
Materials Research Express |
Jafrey Daniel D and Panneerselvam K |
7, 2020 |
10 |
A NOVEL STUDY on SURFACE MODIFICATION of PALMYRA FIBERS for ENHANCING MECHANICAL and THERMAL PROPERTIES |
Article |
Surface Review and Letters |
Raghavendra, T.;Panneerselvam, K. |
27, 2020 |
11 |
An investigation on antibacterial filler property of silver nanoparticles generated from Walnut shell powder by insitu process |
Conference |
Materials Today |
S.Mohan K.Panneerselvam |
39, 2020, 368-372 |
12 |
Mechanical and Thermal Characterization of Camphor Soot Embedded Coir Fiber Reinforced Nylon Composites |
Article |
Fibers and Polymers |
T Raghavendra, K Panneerselvam |
21, 2020, 2569-2578 |
13 |
Investigation on Thermal and Tribological Properties of Polypropylene/Spheri Glass 3000 Composites Processed by Melt Intercalation Method |
Article |
Silicon |
Jafrey Daniel, D. Panneerselvam, K. |
11, 2019, 2885-2894 |
14 |
A Novel Study on Thermal Stability of Camphor Soot Reinforced Coir Fibers |
Article |
Fibers and Polymers |
Raghavendra T. |
19, 2018, 1567-1575 |
15 |
Microstructure evaluation on friction stir welding of cryorolled 2219 aluminum alloy |
Article |
Journal of Testing and Evaluatio |
Kamal Babu, K. Panneerselvam, K. Sathiya,P Noorul Haq, A. Sundarrajan, S. Mastanaiah,P. Srinivasa Murthy, C. V. |
47, 2018 |
16 |
Experimental investigation of resistance welded polypropylene nanocomposite joints |
Article |
Journal of Adhesion Science and Technology |
Jafrey, Daniel D. Panneerselvam, K. |
32, 2018, 2350-2363 |
17 |
Multi-performance optimization of micro-drilling using taguchi technique based on membership function |
Article |
Indian Journal of Engineering and Materials Sciences |
Shunmugesh, K.;Panneerselvam, K. |
25, 2018, 383-390 |
18 |
Investigation on the effects of Cloisite 30B and copolymer (ethylene and butyl acrylate) reinforcement with polypropylene thermoplastic by melt intercalation method |
Article |
Journal of Thermoplastic Composite Materials |
Daniel, D. Jafrey; Panneerselvam, K. |
31, 2018, 1371-1392 |
19 |
Multi-performance Optimization of Drilling Carbon Fiber Reinforced Polymer Using Taguchi: Membership Function |
Article |
Transactions of the Indian Institute of Metals |
Shunmugesh,K.; Panneerselvam, K. |
71, 2018, 1615-1627 |
20 |
Abrasive wear of polypropylene/Cloisite 30B/Elvaloy AC 3427 nanocomposites |
Article |
Journal of Composite Materials, |
Daniel, D. Jafrey; Panneerselvam, K. |
52, 2018, 1833-1843 |
21 |
Corrosion properties of cryorolled aa2219 friction stir welded joints using different tool pin profiles |
Article |
Surface Review and Letters |
Kamal Babu, K. Panneerselvam, K. Sathiya, P. Noorul Haq, A. Sundarrajan, S. Mastanaiah, P. Srinivasa Murthy, C. V. |
25, 2018 |
22 |
Investigations on dry sliding wear behaviour of nylon-6 and GFR nylon-6 composites using Taguchi technique |
Article |
Indian Journal of Engineering and Materials Science |
Kumar, Sudhir; Panneerselvam, K. |
25, 2018, 89-97 |
23 |
Mechanical Properties of Polypropylene Nanocomposites: Dispersion Studies and Modelling |
Article |
Transactions of the Indian Institute of Metals |
Daniel, D. Jafrey; Panneerselvam, K. |
71, 2018, 225-230 |
24 |
Parameter optimization of friction stir welding of cryorolled AA2219 alloy using artificial neural network modeling with genetic algorithm |
Article |
International Journal of Advanced Manufacturing Technology |
Kamal Babu, K.; Panneerselvam, K.; Sathiya, P.; Noorul Haq, A.; Sundarrajan, S.; Mastanaiah, P.; Srinivasa Murthy, C. V. |
94, 2018, 3117-3129 |
25 |
Influences of metastable θ″, θ′ and stable θ intermetallics formed during cryorolling and friction stir welding process on AA2219 |
Article |
Journal of Alloys and Compounds |
Kamal Babu, K.;Panneerselvam, K.;Sathiya, P.;Haq, A. Noorul;Sundarrajan, S.;Mastanaiah, P.;Srinivasa Murthy, C. V. |
732, 2018, 624-629 |
26 |
Effects of various tool pin profiles on mechanical and metallurgical properties of friction stir welded joints of cryorolled AA2219 aluminium alloy |
Article |
Metallurgical Research and Technology |
Kamal Babu, K; Panneerselvam, K; Sathiya, P; Noorul Haq, A; Sundarrajan,S; Mastanaiah,P; Srinivasa Murthy,C.V |
115, 2018 |
27 |
Investigation and optimization of machining parameters in drilling of carbon fiber reinforced polymer (CFRP) composites |
Article |
Pigment and Resin Technology |
Shunmugesh, K. Panneerselvam, K. |
46, 2017, 21-30 |
28 |
Optimization of drilling process parameters Via Taguchi, TOPSIS and RSA techniques |
Article |
Archives of Metallurgy and Materials |
Shunmugesh, K. Panneerselvam, K. |
62, 2017, 1803-1812 |
29 |
Study on Tensile Strength, Impact Strength and Analytical Model for Heat Generation in Friction Vibration Joining of Polymeric Nanocomposite Joints |
Article |
Polymer Engineering and Science |
Jafrey, Daniel D.; Panneerselvam, Kavan |
57, 2017, 495-504 |
30 |
Mechanical and Thermal Behaviour of Polypropylene/Cloisite 30B/Elvaloy AC 3427 Nanocomposites Processed by Melt Intercalation Method |
Article |
Transactions of the Indian Institute of Metals |
Daniel, D. Jafrey; Panneerselvam, K. |
70, 2017, 1131-1138 |
31 |
Optimization of machining process parameters in drilling of CFRP using multi-objective Taguchi technique, to PSIS and RSA techniques |
Article |
Polymers and Polymer Composites |
Shunmugesh, K.; Panneerselvam, K. |
25, 2017, 185-192 |
32 |
Grey Relational Analysis Based Optimization of Multiple Responses in Drilling of Carbon Fiber-Epoxy Composites |
Conference |
Materials Today: Proceedings |
Shunmugesh, K.; Panneerselvam, K. |
4, 2017, 2861-2870 |
33 |
Manufacturing Issues of Polypropylene Nanocomposite by Melt Intercalation Process |
Conference |
Materials Today: Proceedings |
Daniel, D. Jafrey; Panneerselvam, K. |
4, 2017, 4032-4041 |
34 |
Effects of mechanical, metallurgical and corrosion properties of cryorolled AA2219-T87 aluminium alloy |
Conference |
Materials Today: Proceedings |
Babu, K. Kamal; Panneerselvam, K.; Sathiya, P.; Noorul Haq, A.; Sundarrajan, S.; Mastanaiah, P.; Srinivasa Murthy, C. V. |
4, 2017, 285-293 |
35 |
EXPERIMENTAL INVESTIGATION on FRICTION STIR WELDING of CRYOROLLED AA2219 ALUMINUM ALLOY JOINTS |
Article |
Surface Review and Letters |
Babu, K. Kamal; Panneerselvam, K.; Sathiya, P.; Haq, A. Noorul; Sundarrajan, S.; Mastanaiah, P.; Murthy, C. V.Srinivasa |
24, 2017 |
36 |
Machinability study of Carbon Fiber Reinforced Polymer in the longitudinal and transverse direction and optimization of process parameters using PSO–GSA |
Article |
Engineering Science and Technology, an International Journal |
Shunmugesh, K.; Panneerselvam, K. |
19, 2016, 1552-1563 |
37 |
Modeling of tensile properties, dispersion studies, and hardness evaluation of Cloisite 30B in polypropylene with Elvaloy AC 3427 as compatibilizer |
Article |
Journal of Composite Materials |
Jafrey Daniel, D.; Panneerselvam, K. |
50, 2016, 3219-3227 |
38 |
Optimization of process parameters in micro-drilling of Carbon Fiber Reinforced Polymer (CFRP) using taguchi and grey relational analysis |
Article |
Polymers and Polymer Composites |
Shunmugesh, K.; Panneerselvam, K. |
24, 2016, 499-506 |
39 |
Tribological properties of glass fiber reinforced nylon 6 against various counterparts |
Conference |
international conference on advances in production and industrial engineering |
Sudhir kumar and K. Panneerselvam |
2015, 359-364 |
40 |
Dry sliding wear cheracteristics of pure and glass fiber reinforced nylon 6 against AISI D2 steel disc |
Conference |
international conference on Advances in materials, Manufacturing and Applications |
Sudhir kumar and K. Panneerselvam |
2015, 1003-1010 |
41 |
“Research on tribological behaviors of pure and glass fiber reinforced nylon 6 composites against polymer disc” |
Article |
Journal of material science and mechanical engineering |
Sudhir kumar and K. Panneerselvam |
Vol. 2, No. 6, 2015, 24-28 |
42 |
Multi objective optimization of friction and wear of pure and glass fiber reinforced nylon 6 composites using taguchi based grey relational technique” |
Article |
Journal of material science and mechanical engineering |
Sudhir kumar and K. Panneerselvam |
Vol. 2, No. 10, 2015, 7-11 |
43 |
Multi Objective Optimization of Tribological Property of Nylon 6 Composites using Hybrid Taguchi” Grey Relational Analysis and Cuckoo Search Algorithm |
Conference |
ISME Conference, |
Sudhir kumar and K. Panneerselvam |
2015 |
44 |
Mechanical Investigation of Friction Stir Welded Polymeric Nano composites Joints |
Conference |
ISME Conference, Year 2015 |
Jafrey Daniel D and K. Panneerselvam |
2015 |
45 |
Parameters optimization in FSW of polypropylene based on RSM |
Article |
Multidiscipline Modeling in Materials and Structures |
Panneerselvam, K.; Lenin, Kasirajan |
11, 2015, 32-42 |
46 |
"Parameters optimization in FSW of Polypropylene base on RSM |
Article |
Multidiscipline modeling in Materials and Structures |
Panneerselvam, K., and K. Lenin. |
11(1), 2014, 32 – 42. |
47 |
An experimental investigation on polymeric nano composite material |
Conference |
International and 26th All India Manufacturing Technology, Design and Research Conference, Year 2014 |
Jafrey Daniel D and K. Panneerselvam |
2014 |
48 |
Joining of Nylon 6 plate by friction stir welding process using threaded pin profile, |
Article |
Materials and Design (Elsevier) |
Lenin, K., K. Panneerselvam |
53, 2014, 302−307. |
49 |
Process parameters optimization for friction welding of polypropylene materials using Taguchi’s approach, |
Article |
Journal of Scientific & Industrial Research |
K Lenin, H Abdul Shabeer, K Suresh Kumar and K Panneerselvam, |
73, 2014, 369-374. |
50 |
Optimization of CNC Turning Parameters with Carbide Tool for Surface, Roughness Analysis Using Taguchi Analysis, |
Article |
Research Journal of Engineering Sciences |
Shunmugesh K., Panneerselvam K., Pramod M. and Amal George |
3(6), 2014, 1-7 |
51 |
A nova Based Optimization of Machining Parameters in Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites, |
Article |
International Journal of Emerging Engineering Research and Technology |
Shunmugesh. K, Panneerselvam. K, Jospaul Thomas |
2(3), 2014, 53-60. |
52 |
Optimization of Turning Parameters with Carbide Tool for Surface Roughness Analysis |
Article |
International Journal of Emerging Engineering Research and Technology |
Shunmugesh K., Panneerselvam K., Pramod M. and Amal George |
2(2),, 2014, 149-154. |
53 |
Optimising Drilling Parameters Of GFRP By Using Grey Relational Analysis |
Article |
International Journal of Research in Engineering and Technology |
Shunmugesh K, Panneerselvam. K, Jospaul Thomas |
03(06), 2014, 302-305 |
54 |
Joining of Nylon 6 plate by friction stir welding process using threaded pin profile |
Article |
Materials and Design |
Panneerselvam, K.;Lenin, K. |
53, 2014, 302-307 |
55 |
Machining parameter optimization of bidirectional CFRP composite pipe by genetic algorithm |
Article |
Materialpruefung/Materials Testing |
Vijaykumar, Krishnasamy; Panneerselvam, Kavan; Sait, Abdullah Naveen |
56, 2014, 728-736 |
56 |
Machinability study of hybrid-polymer composite pipe using response surface methodology and genetic algorithm |
Article |
Journal of Sandwich Structures and Materials |
Kumar, K. Vijay; Sait, A. Naveen; Panneerselvam, K. |
16, 2014, 418-439 |
57 |
Process parameters optimization for friction stir welding of polypropylene material using taguchi's approach |
Article |
Journal of Scientific and Industrial Research |
Lenin, K.; Shabeer, H. Abdul; Kumar, K. Suresh; Panneerselvam, K. |
73, 2014, 369-374 |
58 |
Optimization Of Turning Parameters With Carbide Tool For Surface Roughness Analysis Using Response Surface Methodology, |
Article |
International Journal Of Research In Aeronautical And Mechanical Engineering Optimization Of Turning Parameters |
Shunmugesh.K, Panneerselvam K, Amal George |
2(6), 2014, 17-27. |
59 |
Machinability study of hybrid-polymer composite pipe using response surface methodology and genetic algorithm, |
Article |
Journal of Sandwich Structures and Material |
K Vijay Kumar, A Naveen Sait, and K Panneerselvam, |
16( 4),, 2014, 418-439. |
60 |
Investigation of process parameters during FSW and FVW of casted Acrylic plate. |
Conference |
International conference on Production and Industrial Engineering |
K. Panneerselvam and K. Lenin, |
2013, 36 |
61 |
Selection of FVW tool, feed rate and frequency for joining nylon 6 and polypropylene plates |
Conference |
International conference on Production and Industrial Engineering |
K. Panneerselvam, K. Lenin and Sachin Kumar |
2013, 36 |
62 |
Investigation of effects of Tool forces and joint defects during FSW of Nylon 6 Plate |
Conference |
International conference of Advances in material processing and Characterization |
K. Panneerselvam and K. Lenin, |
2013, 713-724. |
63 |
Effects and Defects of the Polypropylene plate for Different parameters in Friction stir welding process |
Article |
International journal of Research in Engineering and Technology |
K. Panneerselvam and K. Lenin |
2(2), 2013, 143-152 |
64 |
Study on hardness and microstructural characterization of friction stir welded nylon 6 plate |
Article |
International Journal of Mechanical Engineering |
K. Panneerselvam and K. Lenin |
2(2), 2013, 51-62. |
65 |
Optimizing the welding parameters of Friction stir welding by using resultant force and defects for Nylon 6 material |
Article |
International Journal of Mechanical Engineering |
Lenin, K., K.Panneerselvam, |
2(2), 2013, 77-84 |
66 |
Study on Friction stir welding of Nylon 6 plates. |
Conference |
International Conference on Engineering, Technology and Management |
K. Panneerselvam and K. Lenin |
2012, 101-105. |
67 |
Optimizations of Friction Stir Welding Parameters for Nylon 6 material |
Conference |
International Symposium for Research Scholars |
K. Panneerselvam and K. Lenin |
2012, 47 |
68 |
Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel |
Article |
Optics and Laser Technology |
Sathiya, P.; Panneerselvam, K.; Soundararajan, R. |
44, 2012, 1905-1914 |
69 |
Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm |
Article |
Materials and Design |
Sathiya, P.; Panneerselvam, K.; Abdul Jaleel, M. Y. |
36, 2012, 490-498 |
70 |
Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate |
Article |
article Procedia Engineering |
K. Panneerselvam and K. Lenin |
38, 2012, 3927-3940 |
71 |
Investigation on effect of tool forces and joint defects during FSW of polypropylene plate |
Conference |
Conference Paper Procedia Engineering |
Panneerselvam, K.; Lenin, K. |
38, 2012, 3927-3940 |
72 |
Study on resistance welding of glass fiber reinforced thermoplastic composites |
Article |
Materials and Design |
Panneerselvam, K.; Aravindan, S.; Noorul Haq, A. |
41, 2012, 453-459 |
73 |
Process Parameter Optimization of the Argon shielded laser welding of super austenitic stainless steel |
Conference |
International Conference on MetaComputing |
P.Sathiya, K.Panneerselvam and M.Y.AbdulJaleel |
2012 |
74 |
Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate. |
Conference |
International conference on Modeling, optimization and Computing |
K. Panneerselvam and K. Lenin, |
2012 |
75 |
“Process Parameter Optimization of the Argon shielded laser welding of super austenitic stainless steel”published in proceedings |
Conference |
International Conference on MetaComputing |
P.Sathiya, K.Panneerselvam and M.Y.AbdulJaleel |
2011 |
76 |
Tool geometry for friction stir welding - Optimum shoulder diameter |
Article |
Article Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science |
M. Mehta ., A. Arora ., A. De ., T. DebRoy ., |
42, 2011, 2716-2722 |
77 |
Optimization of end milling parameters for glass fiber reinforced plastic (GFRP) using grey relational analysis |
Conference |
Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 |
Panneerselvam, K.; Aravindan, S.; Noorul Haq, A. |
2011, 1104-1107 |
78 |
Advanced welding of composite material |
Conference |
Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 |
Panneerselvam, K.; Aravindan, S.; Noorul Haq, A. |
2011, 1067-1071 |
79 |
OPTIMIZATION OF END MILLING PARAMETERS FOR GLASS FIBER REINFORCED PLASTIC (GFRP) USING GREY RELATIONAL ANALYSIS”, |
Conference |
Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2011 |
80 |
Advanced Welding of Composite Material”,i |
Conference |
International Conference on Heterogeneous Material Mechanics |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2011, 1067-1071 |
81 |
TAGUCHI MULTI-PERFORMANCE CHARACTERISTICS OPTIMIZATION IN MILLING OF GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITES USING UTILITY CONCEPT |
Conference |
International Conference on Computational Methods in Manufacturing |
K.Panneerselvam, K.Pradeep and P.Asokan |
2011 |
82 |
Optimization of friction welding parameters using evolutionary computational techniques |
Article |
Journal of Materials Processing Technology |
Sathiya, P.; Aravindan, S.; Haq, A. Noorul; Paneerselvam, K. |
209, 2009, 2576-2584 |
84 |
“Joining of thermoplastic by frictional vibration”, |
Article |
Journal of Modern Manufacturing Technology |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
1(1),, 2009, 83-92 |
85 |
“A Heuristic Approach For a Real Time -Mixed Model Assembly Systems To Reduce Idle Time And Material Handling Cost”, |
Article |
A Heuristic Approach For a Real Time -Mixed Model Assembly Systems To Reduce Idle Time And Material Handling Cost |
K.Panneerselvam, S.Aravindan and A.NoorulHaq, |
1(2), 2009, 97-101 |
86 |
Hybrid of ANN with genetic algorithm for optimization of frictional vibration joining process of plastics |
Article |
International Journal of Advanced Manufacturing Technology |
Panneerselvam, K.; Aravindan, S.; Noorul Haq, A. |
42, 2009, 669-677 |
87 |
STUDY ON MILLING OF GLASS FIBER REINFORCED PLASTICS (GFRP) COMPOSITE |
Conference |
National Conference of Emerging Materials and Technologies for India 2020, Year 2008 |
K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq |
2008 |
88 |
Investigation on End milling of Glass Fiber Reinforced Plastic (GFRP) composites |
Conference |
All India seminar on Automation trends in manufacturing industries: cutting edge technologies & their impact, organized by The Institute of Engineers, Year 2008 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2008 |
89 |
An innovative approach for optimization of Frictional Vibration Joining Process” |
Article |
The International Journal for Manufacturing Science & Production |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
9, 3-4,, 2008, 203-216. |
90 |
FEA analysis of resistance welded thermoplastic composite joints |
Conference |
conference paper proceedings of the IIW IC, Year 2008 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2008 |
91 |
Study on Milling of Glass Fiber Reinforced Plastic (GFRP) Composite |
Conference |
International Conference on ADVANCES IN MANUFACTURING TECHNOLOGY (ICAMT2008) for Young Engineers, Year 2008 |
K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq |
2008 |
92 |
STUDY OF MILLING OF GFRP COMPOSITE USING STATISTICAL ANALYSIS |
Conference |
National Conference of Emerging Trends in Mechanical Engineering and Sciences, Year 2007 |
K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq |
2007 |
93 |
Fusion bonding of thermoplastic composites” |
Conference |
Proceedings of Second International Conference on Recent Advances in Composite Materials, Year 2007 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2007 |
94 |
Investigation and Analysis of Friction Stir Welding Parameters on Metal Matrix Composite (Al-SiC) |
Conference |
Proceedings of international conference on Advanced materials and composite,, Year 2007 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2007 |
95 |
Optimization of friction welding parameters using simulated annealing |
Article |
Indian Journal of Engineering and Materials Sciences |
Sathiya, P.; Aravindan, S.; Haq, A. Noorul; Panneerselvam, K. |
13, 2006, 37-44 |
96 |
Joining of thermoplastics and thermoplastic composites” |
Conference |
conference paper Asian Symposium on Materials and Processing, Year 2006 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2006 144 |
97 |
Resistance welding of thermoplastic composites” |
Conference |
International Symposium of Research Students on Materials Science and Engineering |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2006, 102 |
98 |
Optimization of process parameters for friction welding of ferritic stainless steel using taguchi technique |
Conference |
Proceedings of international conference on recent advances in materials & processing |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2006, 48 |
99 |
JOINING OF THERMOPLASTIC MATRIX COMPOSITES BY FRICTIONAL VIBRATION |
Conference |
conference paper National welding Seminar |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2005 |
100 |
“Optimization of Process Parameters of Friction Welding by Genetic algorithm” |
Article |
Journal of Manufacturing Technology Today |
P. Sathiya, S. Aravindan, A. Noorul Haq, K. Paneerselvam |
4, 2005, 9-15 |
101 |
“Joining of Polymeric Matrix Composites” |
Article |
article Published in IWS journal |
K.Panneerselvam, S.Aravindan A.Noorul Haq and R.Krishnamurthy, |
1, 2005, 15-19 |
102 |
JOINING OF PLASTIC BY FRICTIONAL VIBRATION” |
Conference |
National Conference on Modeling and Analysis of Production System |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2004, 190-103. |
103 |
DYNAMIC ANALYSIS OF A COMPRESSOR CRANKSHAFT |
Conference |
National Conference on Recent Trends in Manufacturing Modeling and Analysis, Year 2004 |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2004 |
104 |
Joining of plastic by frictional vibrations”, |
Conference |
International Symposium of Research Students on Materials Science and Engineering |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
66, 2004 |
105 |
Friction Stir Welding” |
Conference |
International Exhibition & conference on Advancements in materials and Process Used in the Manufacturing of transport Vehicles & Automobiles |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2004, 29 |
106 |
Optimization of process parameters of Tungsten Inert Gas Welding using Evolutionary Computational Techniques” |
Conference |
International Symposium on smart Material and Systems |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
2004, 376-383 |
107 |
Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis Original Research Article |
Article |
Procedia Engineering |
K. Panneerselvam, K. Pradeep, P. Asokan |
38, , 3962-3968 |
108 |
Optimization of friction welding parameters using simulated annealing” |
Article |
Indian journal of Engineering & Materials sciences |
P. Sathiya, S.Aravindan, A.Noorul Haq, K.Panneerselvam |
1.13, , 37-44 |
109 |
Joining of Glass Fiber Reinforced Polypropylene Thermoplastic Composites” |
Conference |
InternationalandINCCOM-6 Conference on “Future Trends in Composite Materials andProcessing” IITK |
K.Panneerselvam, S.Aravindan and A.NoorulHaq |
|