NATIONAL CONFERENCE PRESENTED/PUBLISHED:
1. P.Sathiya, S.Aravindan and A.Noorul Haq “Welding of stainless steel” Recent Trends in Manufacturing Technology and Management, conducted by Adhiyamaan engineering college, Hosur, January 28-29, pp 164-168, 2002.
2. A.Suresh kumar,P.Sathiya and T.Ramesh “Friction stir welding of aluminum Plates” MINAC-2002, conducted by JNTU, Anantapur, AP, pp465-468, 2002.
3. T.Ramesh and P.Sathiya “A program for performing one dimensional analysis Using FEM” National seminar on emerging trends in Mechatronics for automation, conducted by NIT,Rourkela, pp456-463, 2002.
4. P.Sathiya, S.Aravindan and A.Noorul Haq “Friction welding of stainless steel” 20th AIMTDR, B.I.T., Mesra, Ranchi, December 13-15, pp 846 sec G, 2002.
5. P.Sathiya, S.Aravindan and A.Noorul Haq “Effects of Shield Gas and Heat Input on Solid Wire Weld metal Properties in GMAW” National welding seminar, conducted by The Indian institute of welding, kolkata, January 22-25, pp A 32, 2003.
6. P.Sathiya, S.Aravindan and A.Noorul Haq “Mechanical properties and microstructure of friction welded 304 stainless steel” National welding seminar, conducted by The Indian institute of welding, kolkata, January 22-25, pp A 33, 2003.
7. P.Sathiya, T.Ramesh, S.Badri Prasad and A.Pradeep “Finite Element Approach on Mechanical Properties of Steel Rod” NSVD, conducted by College of Engineering, Andhra University, Vishakapatnam, February 10 & 11, pp 118-121, 2003.
8. R.Ranzith,P.Sathiya and T.Ramesh, “Improvement of mechanical properties of GTA Welded ferritic stainless steel” NSVD, conducted by College of Engineering, Andhra University, Vishakhapatnam, February 10 & 11, pp 142-146, 2003.
9. P.Sathiya, S.Aravindan and A.Noorul Haq “Study and Evaluation of Pulsed TIG Welding AISI 430 Ferritic Stainless Steel” National Conference on Advances in Manufacturing Technology, conducted by NSS College of Engineering, Pallakad, Kerala, February 15 & 16, pp 3, 2003.
10. P.Sathiya, R.Nandha Kumar, S.Madhanagopal and K.Naveen Kumar “Monitoring the Weld parameters in Robotics System using Computational Vision Analysing System ” National Conference on MEMS and Nano technology, conducted by Vellore Institute of Technology, Vellore, February 28-March 01, pp 127-132, 2003.
11. P.Sathiya, T.Ramesh, S.Madhanagopal and R.Nandha Kumar “A Finite Element approach – Welding of Stainless Steel” National Conference on Modeling and Simulation in Manufacturing, conducted by Annamalai University, Chidambaram, March15 & 16, pp C13-16, 2003.
12. P.Sathiya, T.Ramesh, J.Shankar and R.Suresh Babu “A Program to perform one dimensional heat transfer analysis” National Conference on Modeling and Simulation in Manufacturing, conducted by Annamalai University, Chidambaram, March15 & 16, pp A41-46, 2003.
13. P.Sathiya, S.Aravindan and A.Noorul Haq “Theoretical analysis for the forge phase of friction welding” National workshop on welding technology in India-present status and future trends, SLIET, Longowal in collaboration with IIT Delhi & IWS, April 25-26, pp 138, 2003.
14. P.Sathiya, S.Udayakumar “Effect of welding parameters on thermal cycles & weld pool behaviour” National workshop on welding technology in India-present status and future trends, SLIET, Longowal in collaboration with IIT Delhi & IWS, April 25-26, pp 147, 2003.
15. P.Sathiya, S.Aravindan and A.Noorul Haq “Evaluation of Stainless Steel and medium carbonated Friction Welds” National Conference on World Class Manufacturing, at Amirta Institute of Technology and Science, Coimbatore, May 7-9, pp 116-121, 2003.
16. P.Sathiya, S.Aravindan, A.Noorul Haq, R.Suresh Babu and M.Prakash “Influence of Process parameters in Metal Powder Addition for Narrow Gap Submerged Arc Welding Process” ISTE Chapter, at Adhiyaman Engineering College, Hosur, Sep. 8-9, pp 1.2, 2003.
17. P.Sathiya, S.Aravindan and A.Noorul Haq “Pulsed MIG Welding for Boiler Tube Weld defects using Radiography and Real Time Radioscopy” National Conference on FTME (R&D), at Bharath Institute of Science and Technology, Chennai, Dec. 13-15, 2003.
18. P.Sathiya, S.Aravindan and A.Noorul Haq “Study and analysis of Cryo friction weldments” Modeling and analysis of production systems, N.I.T. Tiruchirappalli, January 22-23, pp 80, 2004.
19. P.Sathiya, S.Aravindan ,A.Noorul Haq,A.Sathesh Babu,R.Suresh Babu “Heat flow analysis in welding by using ANSYS” Modeling and analysis of production systems, N.I.T. Tiruchirappalli, January 22-23, pp 408-412, 2004.
20. P.Sathiya, S.Aravindan,A.Noorul Haq & K.Padmanaban “Effect of weld parameters and flux composition on weld metal ductility of 304 S.S. weldment” Modeling and analysis of production systems, N.I.T. Tiruchirappalli, January 22-23, pp 220-225, 2004.
21. P.Sathiya, S.Aravindan, A.Noorul Haq “Effect of peak pulse current on the porosity formation in pulsed GMAW” Modeling and analysis of production systems, N.I.T. Tiruchirappalli, January 22-23, pp 109-114, 2004.
22. P.Sathiya, S.Aravindan,A.Noorul Haq,R.Sureshkumar and G.T.Rahul “Study and analysis of process parameter in metal powder addition for narrow gap submerged arc welding” XIII National conference of ISME, I.I.T. Roorkee, December30-31, PE-024, 2004.
23. P.Sathiya, S.Aravindan,A.Noorul Haq,A.Sureshkumar and S.Sakthivel “Metallurgical characteristics of double sided gas tungsten arc welding process” XIII National conference of ISME, I.I.T. Roorkee, December30-31, PE-022, 2004.
24. P.Sathiya, S.Aravindan and A.Noorul Haq “Metallurgical characteristics of friction welded joints” Conference on Advances in Materials and Manufacturing Technology, IIT Madras, Chennai, April 2, pp 101, 2004.
25. P.Sathiya, S.Aravindan and A.Noorul Haq “Joining of AISI 430 ferritic stainless steel by friction welding” SOJOM -2004, conducted by Indian Welding Society, southern zone, July 22-23, pp WMD-3, 2004.
26. V.Hariprasath,K.R.Visvanathan and P.Sathiya “ Finite element modeling of Welding process” National conference on Advanced in engineering design,29-30 April conducted by Bannari Amman Institute of Technology, Sathiyamangalam, pp 417-421, 2005.
27. P.Sathiya and P.Dinesh Babu “On-line collision avoidance trajectory planning of multiple robots using NSGA-II”National conference on Contemporary approaches in design and manufacturing, by, ACCET, Karikudi, April 21,2006, pp.4.64, 2006.
28. P.Sathiya, K.Jaikanesh, N.Sivashanmugam and T.Ramesh “Prediction of material behavior of single point cutting tool using finite element technique” National conference on Advances in Manufacturing Engineering, by Sona College of Technology, Salem, April 21-22 ,2006, pp.232-237, 2006.
29. P.Sathiya, S.Aravindan and A.Noorul Haq “Friction welding of similar stainless steels” National Welding Seminar 2006 Conducted by Indian Institute of Welding, Chennai, 24-26 November, 2006, P-46, 2006.
30. P.Sathiya, N.Siva Shanmugam and T.Ramesh “Temperature distribution modeling of Friction Stir Spot Welding of AA 6061-T6 using Finite Element Technique” National Welding Seminar 2006 Conducted by Indian Institute of Welding, Chennai, 24-26 November, 2006, P-47, 2006.
31. P Sathiya, M.Y Abdul Jaleel, Grey-Based Taguchi method for optimization of bead geometry in laser beam bead on plate welding NWS 2009-10 organized by IIW, Kolkatta chapter, P73.
32. P.Sathiya, M.Y.Abdul Jaleel and D.Katherasan, Optimizing the laser bead on plate welding of AISI 904 L super austenitic stainless steel using Taguchi techniques, INSAC-2009 organized by IGCAR, Kalpakkam, pp 695-706.
