Research Publications in Journals

Research Publications

  1. International Journals: 31
  2. National Journals: 02
  3. International Conferences: 02
  4. National Conferences: 05

Publications in International Journals

  1. D. Palanisamy, P. Senthil, V. Senthilkumar. The effect of ageing on machinability of 15Cr-5Ni precipitation hardened stainless steel. Archives of Civil and Mechanical Engineering, (2015)
  2. D. B. Selvam, P. Marimuthu, R. Narayanasamy, V. Senthilkumar, K.S. Tun, M. Gupta. Effect of temperature and strain rate on compressive response of extruded magnesium nano-composite. Journal of Magnesium and Alloys. (2015)
  3. D. Arulkirubakaran, V. Senthilkumar, Vijay Kumawat, Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach, Int. Journal of Refractory Metals and Hard Materials. (2015)
  4. S. Dinesh, V. Senthilkumar, P. Asokan, D. Arulkirubakaran, Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy, Materials and Design. (2015)
  5. V. Sudharsanam , V. Senthilkumar, N. Raju , R. Vetriselvan, Evaluation of post weld heat treatment quality of modified 9Cr–1Mo (P91) steel weld by magnetic coercive force measurements.(2015)
  6. V.Senthilkumar, M.G.Hari Prasath,V.Lomesh Chilamwar, Role of surface texture on tribological behavior of HSS, Journal of surface engineering, (2014)
  7. Ilangovan Arun, P.Vaishnavi, Muthukannan, Duraiselvam, V.Senthilkumar, V.Ananthakrishnan, “Development of carbide Intermetallic layer by electrical discharge alloying on AISI –D2 die steel, Int Journal of Materials Research. Vol 63, Nov. 2014, Pages 257-262.
  8. V.Senthilkumar, A.Balaji, D.Arulkirubakaran, Application of constitutive and neural network models for prediction of high temperature flow behavior of Al/Mg based nanocomposite, Journal of Transaction of ferrous and Non –ferrous china, Vol.23,1737-1750. (2013)
  9. M. Srinivasan, C. Loganathan, R. Narayanasamy, V. Senthilkumar, Q.B. Nguyen, M. Gupta, Study on hot deformation behavior and microstructure evolution of cast-extruded AZ31B magnesium alloy and nanocomposite using processing map, Materials & Design, Volume 47. (2013)
  10. Hafeez Ahamed, V.Senthilkumar, A comparative study on the milling speed for the synthesis of nanostructured Al6063 alloy powder by mechanical alloying, Journal of Minerals and Materials Characterization & Engineering, Vol.10, No.6, pp.507 – 515. (2012)
  11. Hafeez Ahamed, V.Senthilkumar, Prediction of flow stress during hot deformation of mechanically alloyed hybrid aluminium nano-composite employing artificial neural network and Arrhenius constitutive model”, Multidiciplene Modelling in Materials and structure, (2012)
  12. Hafeez Ahamed, V.Senthilkumar, Hot deformation behavior of mechanically alloyed Al6063/0.75Al2O3/0.75Y2O3 nano-composite–A study using constitutive modeling and processing map, Materials Science and Engineering:A, Volume A539,Feb 2012,Pages349-359.
  13. V.Senthilkumar, A.Balaji, R.Narayanasamy, Analysis of hot deformation behavior of Al 5083–TiC nanocomposite using constitutive and dynamic material models, Materials Design, Volume 37, May 2012, Pages 102-110.
  14. V.Senthilkumar, M.Chandrasekar Reddy, Performance analysis of Cu-B4C metal matrix composite as an EDM electrode, International Journal of Machining and Machinability of materials, (2011)
  15. V.Senthilkumar, Bidwai Uday Omprakash, Effect of Titanium Carbide particle addition in the aluminium composite on EDM process parameters, Journal of Manufacturing Processes, Vol.13, pp. 60 – 66 (2011)
  16. V.Senthilkumar, A.Balaji, S.Abhishek,Hafeez Ahamed, Constitutive modeling for the prediction of peak stress in hot deformation processing of Al alloys based nanocomposites, Advanced Materials Research, Vol.328-330, 1602-1605, (2011)
  17. V.Anandhakrishnan, V.Senthilkumar, Mathematical Modeling of Machining Parameters in Electrical Discharge Machining with Cu-B4C Composite Electrode”, Advanced Materials Research, (2011)
  18. V.Senthilkumar, A.Balaji, Hafeez Ahamed, Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC composites, Journal of Minerals and Materials Characterization & Engineering, Vol.10, 1293-1306. (2011)
  19. Hafeez Ahamed, V.Senthilkumar, Consolidation behavior of mechanically alloyed Aluminium based nanocomposites reinforced with nanoscale Y2O3/Al2O3 particles, Materials Characterization, Vol 62, 1235–1249.(2011)
  20. Hafeez Ahamed, V.Senthilkumar, Role of nano-size reinforcement and milling on the synthesis of nano-crystalline aluminium alloy composites by mechanical alloying, Journal of Alloys and Compounds, Vol. 505, pp. 772 – 782, (2010)
  21. V.Senthilkumar, K.Lenin, Synthesis and characterization of ultrafine grained 304 stainless steel through machining, Journal of Minerals and Materials Characterization & Engineering, Vol.10, No.5, pp.455 – 461. (2010)
  22. V.Senthilkumar, R.Narayanasamy, K.S.Pandey, Effect of initial perform geometry and friction on the cold deformation behavior of sintered titanium carbide composite steel, International Journal of Material Forming, Vol 1, pp. 233 – 242 (2008)
  23. R.Narayanasamy, V.Senthilkumar, K.S.Pandey Some features on hot forging of powder metallurgy sintered high strength 4%titanium carbide composite steel preforms under different stress state conditions, Materials and Design, Vol.29, 1380-1400, (2008)
  24. V.Senthilkumar, R.Narayanasamy, Influence of Titanium Carbide particle addition on the forging behavior of powder metallurgy composite steels, Journal of Engineering Manufacture, Vol.222, pp.1333-1345, 2008.
  25. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, Some aspects of workability studys on sintered high strength P/M steel preforms of varying TiC contents during hot forging, J. Materials Science, Vo.43, pp.102-116. (2008)
  26. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, “Some aspects of Hot forging features of P/M sintered High-Strength Titanium Carbide composite steel performs under different stress state conditions, Journal of Engineering Materials and Technology, Vo.129, pp.113-129.(2007)
  27. R.Narayanasamy, V.Senthilkumar, K.S.Pandey “Effect of titanium carbide particle addition on the densification behavior of sintered P/M high strength steel preforms during cold upset forming”, Materials Science and Engineering: A, Vol.456, 180-188.(2007)
  28. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, Some aspects of hot forging features of P/M sintered iron preforms under various stress state conditions, Mechanics of Materials, Vo.38, 367-386. (2006).
  29. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, Some aspects of workability studies on hot forging of sintered hight strength 4% titanium carbide composite steel preforms, Materials Science and Engineering:A, Vo.425,121-130. (2006)
  30. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, Some aspects of workability studies on P/M sintered high strength 4% titanium carbide composite steel preforms during cold upsetting, International Journal of Mechanics and Materials Design, DOI 10.1007/s10999-006-9012-0.
  31. R.Narayanasamy, V.Senthilkumar, K.S.Pandey, Workability studies on powder metallurgy pure iron preforms during hot forging under triaxial condition, International Journal of Mechanics and Materials Design, Vol.3, 175-184. (2006)

Publications in National Journals

  1. V.Senthilkumar, K.Thagadurain, K.Asha, Effect of severe plastic deformation on mechanical characteristics of Al-6061:SiC composites, Manufacturing Technology Today, Vol.9, No.2, pp. 17 -24.
  2. R.Narayanasamy, S.Sathyanarayanan, V.Senthilkumar, Phenomenon of barreling in copper solid cylinder during cold upset forming”, Metal, Materials and processes, vol.10, (1998)

Publications in International Conferences

  1. V.Senthilkumar, A.Balaji, S.Abhishek,Hafeez Ahamed, Constitutive modeling for the prediction of peak stress in hot deformation processing of Al alloys based nanocomposites, International Conference on Mechatronics and Materials Processing, Guangzhou, China, AMR Proceedings Vol.328-30,1602-1605.
  2. V.Senthilkumar, K.Lenin, Synthesis and characterization of ultrafine grained 304 stainless steel through machining, International conference on Nanomaterials, KSR College of Technology, Tamilnadu, India, (2010)

Publications in National Conferences

  1. R.K.Prabhakaran, A.Naveen Sait, V.Senthilkumar, Compressibility studies on the effect of addition of TiC in pure aluminium during cold compaction, National conference on Recent advances in manufacturing and materials held at Chenduran College of Engineering and Technology, Pudukkottai, 8 – 9, April 2011, Pages 226 -229.
  2. Hafeez Ahamed, V.Senthilkumar, Design and optimization of bulk metal processing - A review, Advances in Mechanical engineering, AME 2009, 5 October, 2009, pp. 283 -286.
  3. R.Senthilkumar, V.Senthilkumar, Compressibility studies on the effect of addition of carbon in pure iron, National conference on recent trends in Manufacturing Engineering, Govt. College of Engineering, Vellore, (2007)
  4. V.Senthilkumar, R.K.Prabhakaran, Experimental investigation on cold deformation behavior of Al-Fe Composite of varying iron contents and aspect ratios, National conference on recent trends in Manufacturing Engineering, Govt. College of Engineering, Vellore, (2007)
  5. V.Senthilkumar, Study of influence of aspect ratio on the formability of sintered P/M heat resistant steel preforms under plane stress condition, 3rd National Conference for Research Scholars, Adhiyaman College of Engineering, Hosur, (2006)