1. | Some aspects of barrelling in elliptical shaped billets of aluminium during cold upset forging with lubricant Materials & Design, Volume 29, Issue 3, 2008, Pages 638-661 K. Baskaran and R. Narayanasamy | ||
2. | Wrinkling behaviour of different grades of annealed commercially pure aluminium sheets when drawing through a conical die Materials & Design, Volume 29, Issue 3, 2008, Pages 662-700 C. Loganathan and R. Narayanasamy | ||
3. | Effect of particle size on new constitutive relationship of aluminium–iron powder metallurgy composite during cold upsetting Materials & Design, Volume 29, Issue 5, 2008, Pages 1011-1026 R. Narayanasamy, T. Ramesh, K.S. Pandey and S.K. Pandey | ||
4. | Comparison of barreling in lubricated truncated cone billets during cold upset forging of various metals Materials & Design, Volume 29, Issue 5, 2008, Pages 1027-1035 A. Syed Abu Thaheer and R. Narayanasamy | ||
5. | The effect of strain rate sensitivity on theoretical prediction of limiting draw ratio for cylindrical cup drawing process Materials & Design, Volume 29, Issue 4, 2008, Pages 884-890 R. Narayanasamy, R. Ponalagusamy and S. Raghuraman | ||
6. | Some aspects on cold forging of aluminium–iron powder metallurgy composite under triaxial stress state condition Materials & Design, Volume 29, Issue 4, 2008, Pages 891-903 R. Narayanasamy, T. Ramesh and K.S. Pandey | ||
7. | Effect of geometric work-hardening and matrix work-hardening on workability and densification of aluminium–3.5% alumina composite during cold upsetting Materials & Design, In Press, Corrected Proof, Available online 8 December 2007 R. Narayanasamy, V. Anandakrishnan and K.S. Pandey | ||
8. | An experimental investigation on barreling of aluminium alloy billets during extrusion forging using different lubricants Materials & Design, In Press, Corrected Proof, Available online 16 May 2007 R. Narayanasamy, K. Baskaran, S. Arunachalam and D. Murali Krishna | ||
9. | Effect of titanium carbide particle addition on the densification behavior of sintered P/M high strength steel preforms during cold upset forming Materials Science and Engineering: A, Volume 456, Issues 1-2, 15 May 2007, Pages 180-188 R. Narayanasamy, V. Senthilkumar and K.S. Pandey | ||
10. | Effect of various stress ratio parameters on cold upset forging of irregular shaped billets using graphite as lubricant under plane and triaxial stress state conditions Materials & Design, In Press, Corrected Proof, Available online 20 March 2007 K. Baskaran and R. Narayanasamy | ||
11. | A study on fracture behaviour of three different high strength low alloy steel sheets during formation with different strain ratios Materials & Design, In Press, Corrected Proof, Available online 16 March 2007 R. Narayanasamy, N.L. Parthasarathi, C. Sathiya Narayanan, T. Venugopal and H.T. Pradhan | ||
12. | RETRACTED: Forming limit diagram and crystallographic textures of annealed interstitial free steel sheets Materials & Design, In Press, Uncorrected Proof, Available online 15 March 2007 R. Narayanasamy, C. Sathiya Narayanan and V. Subramanya Sarma | ||
13. | Deformation behaviour of sintered high carbon alloy powder metallurgy steel in powder preform forging Materials & Design, In Press, Corrected Proof, Available online 1 March 2007 A. Rajeshkannan, K.S. Pandey, S. Shanmugam and R. Narayanasamy | ||
14. | Finite difference method for analysis of open-die forging of sintered cylindrical billets Materials & Design, In Press, Corrected Proof, Available online 27 February 2007 R. Ponalagusamy and R. Narayanasamy | ||
15. | Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets Materials Science and Engineering: A, Volumes 445-446, 15 February 2007, Pages 427-439 R. Narayanasamy, C. Sathiya Narayanan and N.L. Parthasarathi | ||
16. | Some studies on stresses and strains of aluminium alloy during extrusion-forging at room temperature Materials & Design, In Press, Corrected Proof, Available online 4 February 2007 R. Narayanasamy, K. Baskaran and D. Muralikrishna | ||
17. | Effect of annealing on formability of aluminium grade 19000 Materials & Design, In Press, Corrected Proof, Available online 18 January 2007 R. Narayanasamy, M. Ravi chandran and N.L. Parthasarathi | ||
18. | Some features on hot forging of powder metallurgy sintered high strength 4%titanium carbide composite steel preforms under different stress state conditions Materials & Design, In Press, Corrected Proof, Available online 5 January 2007 R. Narayanasamy, V. Senthilkumar and K.S. Pandey | ||
19. | Forming limit diagram for interstitial free steels supplied by Ford India Motors Materials & Design, Volume 28, Issue 1, 2007, Pages 16-35 R. Narayanasamy and C. Sathiya Narayanan | ||
20. | Barrelling in truncated lubricated zinc cone billets during cold upset forging Materials & Design, Volume 28, Issue 2, 2007, Pages 434-440 A. Syed Abu Thaheer and R. Narayanasamy | ||
21. | Experimental analysis and evaluation of forming limit diagram for interstitial free steels Materials & Design, Volume 28, Issue 5, 2007, Pages 1490-1512 R. Narayanasamy and C. Sathiya Narayanan | ||
22. | An experimental investigation on strain hardening behaviour of aluminium – 3.5% alumina powder metallurgy composite preform under various stress states during cold upset forming Materials & Design, Volume 28, Issue 4, 2007, Pages 1211-1223 R. Narayanasamy, T. Ramesh and K.S. Pandey | ||
23. | Modelling the effect of particle size and iron content on forming of Al–Fe composite preforms using neural network Materials & Design, Volume 28, Issue 1, 2007, Pages 119-130 N. Selvakumar, P. Ganesan, P. Radha, R. Narayanasamy and K.S. Pandey | ||
24. | Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions Materials & Design, Volume 28, Issue 5, 2007, Pages 1555-1576 R. Narayanasamy and C. Sathiya Narayanan | ||
25. | The influence of friction on the prediction of wrinkling of prestrained blanks when drawing through a conical die Materials & Design, Volume 28, Issue 3, 2007, Pages 904-912 R. Narayanasamy and C. Loganathan | ||
26. | Prediction of limit strains in sheet metals by using new generalized yield criteria Materials & Design, Volume 28, Issue 3, 2007, Pages 913-920 R. Ponalagusamy, R. Narayanasamy and K.R. Subramanian | ||
27. | A study on barrelling behaviour of aluminium billets during cold upsetting with an extrusion die constraint at one end Materials & Design, Volume 28, Issue 3, 2007, Pages 954-961 S. Malayappan, R. Narayanasamy and K. Kalidasamurugavel | ||
28. | Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging Materials & Design, Volume 28, Issue 2, 2007, Pages 592-598 K. Manisekar and R. Narayanasamy | ||
29. | Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies Materials & Design, Volume 28, Issue 1, 2007, Pages 254-259 R. Narayanasamy and C. Sathiya Narayanan | ||
30. | Phenomenon of instantaneous strain hardening behaviour of sintered Al–Fe composite preforms during cold axial forming Materials & Design, Volume 28, Issue 4, 2007, Pages 1358-1363 R. Narayanasamy, N. Selvakumar and K.S. Pandey | ||
31. | Barrelling of aluminium solid cylinders during cold upset forging with constraint at both ends Materials & Design, Volume 28, Issue 4, 2007, Pages 1404-1411 S. Malayappan, R. Narayanasamy and G. Esakkimuthu | ||
32. | Some study on wrinkling behaviour of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies Materials & Design, In Press, Corrected Proof, Available online 27 December 2006 R. Narayanasamy, C. Loganathan and J. Satheesh | ||
33. | Forming, fracture and wrinkling limit diagram for if steel sheets of different thickness Materials & Design, In Press, Corrected Proof, Available online 9 November 2006 R. Narayanasamy and C. Sathiya Narayanan | ||
34. | Computer-aided metal flow investigation in streamlined extrusion dies Materials & Design, In Press, Corrected Proof, Available online 27 September 2006 R. Ponalagusamy, R. Narayanasamy, R. Venkatesan and S. Senthilkumar | ||
35. | Study on wrinkling limit of interstitial free steel sheets of different thickness when drawn through Conical and Tractrix dies Materials & Design, In Press, Corrected Proof, Available online 25 September 2006 R. Narayanasamy and C. Loganathan | ||
36. | Some aspects on cold forging of aluminium–alumina powder metallurgy composite under triaxial stress state condition Materials & Design, In Press, Corrected Proof, Available online 22 September 2006 R. Narayanasamy, T. Ramesh and K.S. Pandey | ||
37. | An experimental investigation on work hardening behaviour of elliptical shaped billets of aluminium during cold upsetting Materials & Design, In Press, Corrected Proof, Available online 22 August 2006 K. Baskaran and R. Narayanasamy | ||
38. | Some aspects of workability studies on hot forging of sintered high strength 4% titanium carbide composite steel preforms Materials Science and Engineering: A, Volume 425, Issues 1-2, 15 June 2006, Pages 121-130 R. Narayanasamy, V. Senthilkumar and K.S. Pandey | ||
39. | Some aspects on hot forging features of P/M sintered iron preforms under various stress state conditions Mechanics of Materials, Volume 38, Issue 4, April 2006, Pages 367-386 R. Narayanasamy, V. Senthilkumar and K.S. Pandey | ||
40. | Study on wrinkling limit of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies Materials Science and Engineering: A, Volume 419, Issues 1-2, 15 March 2006, Pages 249-261 R. Narayanasamy and C. Loganathan | ||
41. | Wrinkling of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies Materials Science and Engineering: A, Volume 419, Issues 1-2, 15 March 2006, Pages 331-343 C. Loganathan and R. Narayanasamy | ||
42. | Some aspects on fracture limit diagram developed for different steel sheets Materials Science and Engineering: A, Volume 417, Issues 1-2, 15 February 2006, Pages 197-224 R. Narayanasamy and C. Sathiya Narayanan | ||
43. | Some aspects on strain hardening behaviour in three dimensions of aluminium–iron powder metallurgy composite during cold upsetting Materials & Design, Volume 27, Issue 8, 2006, Pages 640-650 R. Narayanasamy, T. Ramesh and K.S. Pandey | ||
44. | Workability studies on cold upsetting of Al–Al2O3 composite material Materials & Design, Volume 27, Issue 7, 2006, Pages 566-575 R. Narayanasamy, T. Ramesh and K.S. Pandey | ||
45. | Effect of friction on barrelling in square billets of aluminium during cold upset forging Materials & Design, Volume 27, Issue 2, 2006, Pages 147-155 K. Manisekar, R. Narayanasamy and S. Malayappan | ||
46. | An upper bound solution to extrusion of circular billet to circular shape through cosine dies Materials & Design, Volume 27, Issue 5, 2006, Pages 411-415 R. Narayanasamy, R. Ponalagusamy, R. Venkatesan and P. Srinivasan | ||
47. | Forming limit diagram for Indian interstitial free steels Materials & Design, Volume 27, Issue 10, 2006, Pages 882-899 R. Narayanasamy and C. Sathiya Narayanan | ||
48. | Effect of annealing on the wrinkling behaviour of the commercial pure aluminium grades when drawn through a conical die Materials & Design, Volume 27, Issue 10, 2006, Pages 1163-1168 C. Loganathan, R. Narayanasamy and S. Sathiyanarayanan | ||
49. | Effect of mechanical properties on the wrinkling behaviour of three different commercially pure aluminium grades when drawn through conical and tractrix dies Materials Science and Engineering: A, Volume 406, Issues 1-2, 15 October 2005, Pages 229-253 C. Loganathan and R. Narayanasamy | ||
50. |
© WebTeam NIT Trichy, |