Dr. T. Jagadesh

Email id : jagadesh@nitt.edu

Academic details

  • Post Doctoral Fellowship (2016) - Indian Institute of Technology Madras
  • Ph.D.(2016) - Indian Institute of Technology Madras
  • M.Tech. (2011): Anna University, Chennai (MIT Campus)
  • B.Tech. (2009): Government Engineering College, Erode

Research interests

  • Laser Material Processing
  • Tool based micromachining
  • Laser micromachining
  • Composite 3D printing

Professional Experience 

       Organization     Designation     From To
National Institute of Technology, Tiruchirappalli Assistant Professor-Grade I 11-03-2024 Till date

    National Institute of Technology, Tiruchirappalli

  Assistant Professor-Grade II

  06-05-2020    10-03-2024
Amrita Vishwa Vidyapeetham, Amritapuri campus

Assistant Professor

(Selection Grade)

    2017    2020
Indian Institute of Technology Madras  Post-doctoral fellowship    2016     2016
Indian Institute of Technology Madras Research scholar- HTRA      2011   2016

Scholastic Achievements 

  • Secured centum in MATHS and SCIENCE in SSLC
  • Received Research award in 58th Institute day at IIT Madras
  • Post-doctoral fellowship at IIT Madras

Projects  

  • Development and characterisation of 3D Printed CFRP composites - SEED 

Short term training 

  • Processing and applications of composite materials - IIT Madras, 2011
  • Thermal spray coating and Technologies for Industrial applications - IIT Madras, 2013
  • Techniques in Multiscale modeling - IIT Madras, 2016
  • Modeling, simulation & experimental approaches of unconventional manufacturing techniques - IIT Madras, 2017
  • Precision measurements in modern manufacturing - IIT Madras, 2017
  • Additive Manufacturing - IIT Kanpur, 2018
  • Recent advancement in high-speed machining technology and part inspection - IIT Madras, 2019
  • Key challenges and road ahead to additive manufacturing - IIT Madras, 2020

Courses Taught 

  • Undergraduate Level 
  • Introduction to Production Engineering
  • Kinematics and dynamics of machines
  • Engineering Graphics
  • Post Graduate Level 
  • Manufacturing management

Industrial Exposure

  • Central Institute of Fisheries Nautical and Engineering Training, CIFNET, Kochi, Kerala
  • Sree Saradhambal Automobiles Pvt. Ltd., Coimbatore, Tamilnadu
  • Mettur Thermal power plant station, Tamilnadu
  • Schneider Prototyping India Pvt Ltd, Tamilnadu

Memberships in Professional Bodies

  • Life Associate Member in Institution of Engineers

Session chair

  • Chaired a technical session in the International Conference on Additive Manufacturing and Allied Technologies (ICAMAT-2022) organized by the Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli, India, 10-11 June 2022.

Invited Talks delivered

  • "High-performance coatings on cutting tools for industrial applications" - Kongu Engineering college - 2017
  • "Research challenges in micro-manufacturing process" - Amrita Vishwa Vidyapeetham Amritapuri campus - 2018
  • "Online Teaching Through MS Team and Assessment Tools for Evaluation" - NIT Trichy - 2021
  • "Research challenges in micro manufacturing and measurement" - Marian Engg. College,Trivandrum, Kerala - 2021
  • "Introduction to Micromachining" - Sri Ramakrishna Engineering College, Coimbatore - 2021
  • "Laser micro processing for biomedical applications" - Coimbatore Institute of Technology, Tamilnadu- 2021
  • "Micromachining process and measurement " - Kongunadu College of Engineering - 2022
  • "Fused filament fabrication - Composite 3D Printing" - Center of Excellence in Manufacturing, NIT Trichy - 2023
  • "Research challenges in Laser machining process" - Mepco Schlenk Engineering College - 2023
  • " Research challenges in Additive manufacturing of metals" - Indian Institute of metals, student chapter - Kongu Engineering College - 2023
  • "Fused filament fabrication of CFRP composite" - Faculty Development Program on Composite Additive Manufacturing - NIT Trichy - 2024
  • "Micro machining of difficult to machine material" - Faculty Development Program on Precision manufacturing - PSG College of Tech Coimbatore - 2024
  • " Research challenges in Composite 3D Printing" - Faculty Empowerment Program on Additive Manufacturing - Anna University, MIT Campus - 2024
  • " Machine Design and 3D Printing " - MSME Innovation – Design Scheme - 2024

Administrative Responsibilities within the University

  • Warden - Garnet A , Garden B, Kailash mess from March 2023 to Till date
  • Lab incharge - Advanced CNC lab
  • Staff Advisor - B.Tech. (Production Engineering) - From June 2021 to Till date
  • Department MIS Coordinator - From June 2020 to Till date
  • Department SOP Coordinator - From June 2020 to Till date
  • NBA Committee member - From June 2020 to Till date

Administrative Responsibilities outside the University

  • Doctoral Committee Member - Amrita Vishwa Vidyapeetham Amritapuri Campus - 2019 to Till date
  • Doctoral Committee Member - Amrita Vishwa Vidyapeetham Bengaluru Campus - 2022 to Till date

Projects guided at Postgraduate level

  S. No 

                   Project title

        Name

     Course

    Year

1

Experimental investigation into mechanical behavior of 3D printed pure nylon

Bandi Karthick

Manufacturing Technology

2022

2

Experimental investigation of flexural and impact behaviour of PETG polymer composite under solar irradiation

Dandaveni Shashi Kumar

Manufacturing Technology

2022

3

Experimental investigation into impact behaviour of 3D printed nylon carbon fiber composite

Siddhesh Pravin salve

Manufacturing Technology

2022

4

Modeling and experimental investigation of tensile and flexural behaviour of 3D Printed components

Bandi Karthick

Manufacturing Technology

2021

5

Influence of FDM process parameters and heat treatment on compressive strength of 3D printed parts

Dandaveni Shashi Kumar

Manufacturing Technology

2021

6

3D Finite Element Analysis of screw threads under repeated transverse loading and multi axial loading

Siddhesh Pravin salve

Manufacturing Technology

2021
 

Journals

  • T Jagadesh, G.L. Samuel (2014) “Investigations into Cutting Forces and Surface Roughness in Micro Turning of Titanium Alloy Using Coated Carbide Tool” , Procedia Materials Science, 5 (0), 2450-2457.
  • T Jagadesh, G.L. Samuel (2015) “Mechanistic and Finite Element Model for Prediction of Cutting Forces during Micro-Turning of Titanium Alloy” Machining Science and Technology, An International Journal, 19 (4), 593-629.
  • T Jagadesh, G.L. Samuel (2016) “Finite Element Simulations of Micro Turning of Ti-6Al-4V using PCD and Coated Carbide tools”, Journal of Institute of Engineers, Series C. 1-11.
  • V Pardha saradhi, V Shashank, P Sai teja, G Anbarasu, A Bharat, T Jagadesh (2018)” Prediction of surface roughness and material removal rate in laser assisted turning of aluminium oxide using fuzzy logic”, Materials Today: Proceedings. 5, 20343-20350.
  • T Jagadesh, G.L. Samuel (2019) “Influence of deep cryogenic treatment and in-situ cryogenic micro turning of Ti-6Al-4V on cutting forces, surface integrity and chip morphology” , International Journal of Precision Technology. 8, 312-334.
  • T K Naveen, T Jagadesh (2019) “Experimental investigations into performance evaluation of thermosyphon solar heating system using modified PCM modules” Lecture notes in mechanical engineering, pp 211-221.
  • V. Shashank, C. V. Mahendra Varma, Devendra Chaudhari, V. Sai Sasank, and T. Jagadesh (2019) “Prediction of micro abrasive intermittent jet machining process using adaptive neurofuzzy inference system”, AIP Proceedings, pp. 1-10.
  • V Shashank , V Pardha saradhi , T Jagadesh (2019) “Modeling of Laser assisted machining process using Artificial Neural Network”, Journal of physics, pp 1-10.
  • Harshith, N., Devendra Y. and T Jagadesh (2019) "Investigations into surface integrity and cylindricity error during peck drilling of aerospace alloy using graphite, MOS2 and blasocut lubricant." Materials Today: Proceedings, Vol. 18, No. pp. 3091-8.
  • Suresh, N., Ganesh S. and T Jagadesh (2020) "Investigations into edge radius and point angle on energy consumption during micro drilling of titanium alloy." Materials Today: Proceedings, Vol. 26, No. pp. 586-91.
  • Dheeraj, N., Sanjay S., Kiran Bhargav K. and T  Jagadesh (2020) "Investigations into solid lubricant filled textured tools on hole geometry and surface integrity during drilling of aluminium alloy." Materials Today: Proceedings, Vol. 26, No. pp. 991-7.
  • K. Nirmal, T. Jagadesh (2021) "Numerical simulations of friction stir welding of dual phase titanium alloy for aerospace applications", Materials Today: Proceedings, 46 4702-4708.
  • M.P. Ram, S.V. Narasimhan, R.V. Vikraman, T Jagadesh (2021) "Development of a 4-speed automated manual transmission for automobile applications", Materials Today: Proceedings, 46, 4387-4394.
  • Mishra PK, Kalidas P, T Jagadesh (2021) "Hole geometry and surface integrity assessment in drilling of inconel 718 using laser texture filled solid lubricant tools", Industrial Lubrication and Tribology. https://doi.org/10.1108/ILT-07-2021-0237 .
  • Nijin, J. R. & T. Jagadesh (2022). "Numerical simulation of the influence of tool geometry on energy consumption during micro turning of titanium alloy". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089211063119
  • Mishra PK, T. Jagadesh (2022). "Applications and Challenges of 3D Printed Polymer Composites in the Emerging Domain of Automotive and Aerospace: A Converged Review". Journal of The Institution of Engineers (India): Series D. 2022. https://doi.org/10.1007/s40033-022-00426-x.
  • Mishra PK, D Shashi kumar, T Jagadesh , Kartikeya S (2023). "Experimental investigation into flexural and impact behavior of 3D printed PETG short carbon fiber composite under solar light irradiation", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.https://doi.org/10.1177/09544062221149923
  • Deepu P, T Jagadesh, Muthukannan D, Jagadeesh B (2023). "Investigation into femtosecond based laser ablation and morphology of micro-hole in titanium alloy. Optik - International Journal for Light and Electron Optics,  274: p. 170519. https://doi.org/10.1016/j.ijleo.2023.170519
  • Mishra, P. K. & T Jagadesh (2023). "Investigations into flexural behavior of additively manufactured short and continuous fiber CFRP composites". Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(3), pp 159.
  • Mishra PK, Bandi Karthik, T. Jagadesh (2023). "Finite Element Modelling and Experimental Investigation of Tensile, Flexural, and Impact Behaviour of 3D-Printed Polyamide". Journal of The Institution of Engineers (India): Series D. (Accepted).
  • Mishra, P. K. & T Jagadesh (2023). "Investigation into tensile behavior of 3D printed nylon-based low and high-volume fraction carbon fiber composite". Rapid Prototyping Journal, 29(8):1679-701.https://doi.org/10.1108/RPJ-06-2022-0204
  • Deepu, P., T. Jagadesh, and M. Duraiselvam (2023). "Investigations into morphology and surface integrity of micro-hole during femtosecond laser drilling of titanium alloy". Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(10): p. 516. https://doi.org/10.1007/s40430-023-04449-7.
  • Deepu, P. and T. Jagadesh (2023) "Femtosecond Laser Micro Drilling of Cooling Holes on Thermal Barrier Coated Titanium Alloy for Aeroengine Application". Journal of Materials Engineering and Performance.  https://doi.org/10.1007/s11665-023-08679-7.
  • Mishra, P. K., Siddhesh Salve and T. Jagadesh (2023) "Investigations into impact behaviour of 3D printed nylon short carbon fiber composite". Journal of The Institution of Engineers (India): Series D. (Accepted).

Conferences

  • Jagadesh, T., A. Rajadurai (2011) “Study on composites made by Powder Metallurgy using Microwave Sintering” National conference on recent trends in Mechanical Engineering, 26th March 2011, at GKM college of Engineering and Technology, Chennai.
  • Jagadesh, T., G.L. Samuel (2014) "Finite Element Modeling for Prediction of Cutting Forces during Micro Turning of Titanium Alloy", All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014, December 12-14, at IIT Guwahati.
  • Jagadesh, T., G.L. Samuel (2015) “Investigations into cutting forces, surface roughness, and chip morphology during micro turning of cryogenically treated titanium alloy” Advances in materials and processing technologies conference, AMPT 2015 December 14-17, at Universidad Carlos III de, Madrid, Spain.
  • Jagadesh, T., G.L. Samuel (2017) “Finite element simulation for prediction of cutting forces during in-situ cryogenic micro turning of titanium alloy” COPEN- 10, December 7-9, 2017, IIT Madras.

Contact Address

Dr. T. Jagadesh
Assistant Professor
Department of Production Engineering

Room No: MTB -103 (Groud floor)                                                                                                                                         
National Institute of Technology Tiruchirappalli
Tiruchirappalli - 620015
Tamil Nadu, India.

Email: jagadesh@nitt.edu, jagadeshvel@gmail.com

Phone No : 9080746066