List of Publications
(A) Refereed Research Journals:
Sl.No |
Author(s) |
Title of Paper |
Journal |
Volume (No.) |
Page numbers
|
Year |
Impact Factor of the Journal
|
| 135 | Jinshah BS, Balasubramanian Karuppudayar Ramaraj, Ravi Kumar Kottala, Sivapirakasam SP | A complete numerical model for low temperature composite form-stable phase change material slab based on dynamically simplified temperature transforming method | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | 47 | 9155-9180 | 2025 | 2.3 |
| 134 | M Rahul, SP Sivapirakasam, Sreejith Mohan, BR Vishnu, C Prasanth | Development of low-emission next-generation stainless steel E304–16 and E316–16 synthetic electrodes with mild steel Core wire | Sustainable Materials and Technologies | 44 | e01372 | 2025 | 8.7 |
| 133 | Biplab Das, Shekhar Kumar, SP Sivapirakasam | Risk and consequence analysis of ammonia storage units in a nuclear fuel cycle facility | Process Safety Progress | 43 | 668-677 | 2024 | 0.26 |
| 132 | VD Vijayanand, R Ruban, SP Sivapirakasam, GV Prasad Reddy, A Nagesha, M Vasudevan |
Beneficial role of short-term aging on creep performance of cold-worked Ti-added 14Cr–15Ni stainless steel |
Journal of Materials Science | 59 | 21087–21101 | 2024 | 0.78 |
| 131 | Nandakumar Subramanian, Sivapirakasam SP, Sreejith Mohan | Investigations on ammonium O, O dicetyl dithiophosphate (ADCTP) as a novel antistatic additive for kerosene fuel - an exploratory study | Petroleum Science and Technology | 42 | 4501-4519 | 2024 | 0.33 |
| 130 | R Ruban, VD Vijayanand, SP Sivapirakasam, GV Prasad Reddy | Influence of thermo-mechanical and solution annealing treatments on the flow behaviour of 14Cr-15Ni stainless steel | Canadian Metallurgical Quarterly | - | 1-6 | 2024 | 0.23 |
| 129 | S. Nandakumar and S. P. Sivapirakasam | Exploring the efficacy of various surfactants on the kerosene fuel and its electrical conductivity responses | Petroleum science and technology | 42 | 1522–1532 | 2024 | 0.33 |
| 128 | R.K. Raajesh Kannan , S.P. Sivapirakasam, M. Rahul, Sreejith Mohan , B.R. Vishnu | Effect of activated fluxes on the BZC and Cr (VI) concentration in stellite hardfacing operation | Materials Today Communications | 38 | 107726 | 2024 | 0.67 |
| 127 | M. Rahul, S.P. Sivapirakasam , Mohan Sreejith , B.R. Vishnu, Krishna Vijayakumar | Concurrent reduction of the fume and Cr (VI) concentrations of inhalable and respirable particle using a new covered stainless-steel SMAW electrode | Journal of Environmental Chemical Engineering | 12 | 11632 | 2024 | 1.36 |
| 126 | K S R Varun Teja, Sreejith Mohan, Ganesh Patel, S P Sivapirakasam, Rahul M | Ergonomic Risk Assessment and Fatigue Analysis During Manual Lifting Tasks in Farming Activities | International Journal of Occupational Safety and Health) | 14 | - | 2024 | 0.2 |
| 125 | Aravind Surendran Lathika, Suthangathan Paramashivan Sivapirakasam Sreejith MohanMahadevan Surianarayanan | Thermo kinetic and Ballistic Property Studies of Azide-Based Airbag Gas Generants with Dual Oxidizers (Sr(NO3)2)and KNO3) | Energy Technology | 11 | - | 2023 | 0.86 |
| 124 | Nandakumar Subramanian, Sivapirakasam SP, Sreejith Mohan | Investigations on ammonium O, O dicetyl dithiophosphate (ADCTP) as a novel antistatic additive for kerosene fuel-an exploratory study | Petroleum Science and Technology | 1-19 | 2023 | 0.33 | |
| 123 | Rahul Madhusoodhanan, Sivapirakasam Suthangathan Paramashivan, Sreejith Mohan, Vishnu B Rajeshwari | Study on the soluble and insoluble fume and hexavalent chromium emitted from a new covered electrode with micro and nano sized-sodium and potassium titanate–based flux | Environmental Science and Pollution Research | 30 | 95550-95565 | 2023 | 1.01 |
| 122 | Kandukuri Sri Ram Varun Teja, Mohan Sreejith, SP Sivapirakasam | Advancements in Hip Implant Materials: A Comprehensive Review on the Development of Hip Implants to Achieve Enhanced Performance and Durability | International Conference on Mechanical Engineering: Researches and Evolutionary Challenges | - | 637-649 | 2023 | - |
| 121 | Subhash G.V, Sivapirakasam S.P, & Harisivasri Phanindra K | Production and characterization of bio mixture fuels from raw oil feedstock and the effect of ionic liquid as an additive on bio mixture fuels | Biomass Conversion and Biorefinery | 13 | 5633-5647 | 2023 | 0.6 |
| 120 | Jayabalaganesh G, Sivapirakasam S P, Sreejith Mohan, Aravind S. Harisivasri Phanindra K | A Methodological Approach to Select a Suitable Azodicarbonamide Based Airbag Gas Generant | Combustion science and technology | - | - | 2023 | - |
| 119 | B. R. Vishnu, S. P. Sivapirakasam, Sreejith Mohan M, Rahul | Investigations on the weld metal properties of nanoparticle embedded low fume SMAW electrodes | Trans Indian Inst Met | 76 | 675-684 | 2023 | 0.36 |
| 118 | R. K. Raajesh Kannan1,S. P. Sivapirakasam, Sreejith Mohan ,M. Rahul, B.R.Vishnu | Reduction of Cr6+ formation in the stellite hardfacing operation by a novel thin film of zinc coating on a stellite filler rod. | Welding in the World | 67 | 21-31 | 2023 | 0.57 |
| 117 | V.M. Akhil ,S.L. Aravind a, Ravi Kiran, Sivapirakasam S P, Sreejith Mohan | Experimental investigations on the effect of infill patterns on PLA for structural applications | Materials Today: Proceedings | 76 | 636-639 | 2023 | 0.47 |
| 116 | G. V. Subhash ,S. P. Sivapirakasam, Sreejith Mohan. Nandakumar Subramanian K. Harisivasri Phanindra | Effect of diethyl ether additive on re formulated biomix blends from a mixture of different FEED stock’s. | Waste and Biomass Valorization | 14 | 261-276 | 2023 | 0.61 |
| 115 | M Rahul, SP Sivapirakasam, S Mohan, BR Vishnu, JFP Gomes | Study on mass concentration and morphology of SMAW fume particles with a new covered electrode using nano-CaTiO3 as an arc stabilizer | Journal of Manufacturing Processes | 84 | 230-239 | 2022 | 5.684 |
| 114 | K Harisivasri Phanindra, S Venukumar, Cheepu Muralimohan, Mohammad Sameer, N Likhith, M Sai Johith, SP Sivapirakasam | Consequence modeling of Bromine under different scenarios | AIP Conference Proceedings | 2648 | - | 2022 | - |
| 113 | SBM Guruvayurappan, SP Sivapirakasam, R Suresh, Adarsh Kumar Sahu, S Ratheesh | Study on the Stress–Strain Behaviour of Rubberized Textile Composite Used in Aerospace Applications | ISAMPE National Conference on Composites | - | 3-14 | 2022 | - |
| 112 | M Rahul, SP Sivapirakasam, S Mohan, BR Vishnu, JFP Gomes | Study on mass concentration and morphology of SMAW fume particles with a new covered electrode using nano-CaTiO3 as an arc stabilizer | Journal of Manufacturing Processes | 84 | 230-239 | 2022 | 5.684 |
| 111 | VM Akhil, SL Aravind, Ravi Kiran, SP Sivapirakasam, Sreejith Mohan | Reduction of Cr6+ formation in the stellite hardfacing operation by a novel thin film of zinc coating on a stellite filler rod | Welding in the World | 66 | - | 2022 | 2.137 |
| 110 | VM Akhil, SL Aravind, Ravi Kiran, SP Sivapirakasam, Sreejith Mohan | Experimental investigations on the effect of infill patterns on PLA for structural applications | Materials Today: Proceedings | - | - | 2022 | - |
| 109 | BR Vishnu, SP Sivapirakasam, Sreejith Mohan, M Rahul | Investigations on the weld metal properties of nanoparticle-embedded low-fume SMAW electrodes | Transactions of the Indian Institute of Metals | 75 | 1-10 | 2022 | 1.430 |
| 108 | GV Subhash, SP Sivapirakasam, Sreejith Mohan, Nandakumar Subramanian, K Harisivasri Phanindra | Effect of Diethyl Ether Additive on Reformulated Bio-Mix Blends from a Mixture of Different FEED Stock’s | Waste and Biomass Valorization | 13 | 1-16 | 2022 | 3.575 |
| 107 |
R Ruban, VD Vijayanand, SP Sivapirakasam, VS Srinivasan, GV Prasad Reddy |
On Comparison of Creep Damage Behaviour in Two Variants of Titanium Added 14Cr-15Ni Stainless Steel |
Engineering Failure Analysis |
- |
106525 |
2022 |
3.73 |
| 106 |
Sooraj Sabu, KSR Varun Teja, Sreejith Mohan, Nivish George, SP Sivapirakasam |
A biomechanical model to predict hand-arm vibration when using different vibration damping gloves |
Materials Today: Proceedings |
56 |
3527-3533 |
2022 |
1.46 |
| 105 |
S Venkatesh, SP Sivapirakasam, M Sakthivel, R Krishnaraj, TJ Leta |
Desalination And Water Treatment |
244 |
157-166 |
2021 |
1.234 |
|
| 104 |
SP Sivapirakasam, N Venu Kumar, G Jeyabalaganesh, K Nagarjuna |
Simple Model for Predicting the Detonation Velocity of Organic, Inorganic, and Mixed Explosives |
Combustion, Explosion, and Shock Waves |
57 |
726-735 |
2021 |
0.946 |
| 103 |
GV Subhash, SP Sivapirakasam, Sreejith Mohan, K Harisivasri Phanindra |
Production, characterization and assessment of reformulated bio-mixture fuel from a mixture of various raw feedstock's and the effect of n-butanol as an additive on bio-mixture blends |
Biomass and Bioenergy |
154 |
106246 |
2021 |
5.061 |
| 102 |
AV Ajay, Sreejith Mohan, SP Sivapirakasam |
AIP Conference Proceedings |
2352 |
020078 |
2021 |
0.402 |
|
| 101 |
SP Sivapirakasam, G Jeyabalaganesh, N Venu Kumar, SL Aravind, G Aravind |
Simple Method to Evaluate the Ballistic Properties for Gas Generant Compositions |
Combustion, Explosion, and Shock Waves |
57 |
299-307 |
2021 |
0.946 |
| 100 |
S Venkatesh, SP Sivapirakasam, M Sakthivel, S Ganeshkumar, M Mahendhira Prabhu, M Naveenkumar |
Experimental and numerical investigation in the series arrangement square cyclone separator |
Powder Technology |
383 |
93-103 |
2021 |
5.134 |
| 99 |
GV Subhash, SP Sivapirakasam |
Biomass Conversion and Biorefinery |
- |
1-15 |
2021 |
4.987 |
|
| 98 |
M Jaganmohan Rao, SP Sivapirakasam, K Harisivasri Phanindra, BR Vishnu |
International Journal of Heavy Vehicle Systems |
28 |
409-422 |
2021 |
0.68 |
|
| 97 |
Sreejith Mohan, Yedu Krishnan Madhusudhanan, Sabari Salim, R Nikhil, P Vishnu, SP Sivapirakasam, BR Vishnu |
Performance and emission analysis of an internal combustion engine with hydroxy gas assist |
Materials Today: Proceedings |
46 |
10043-10046 |
2021 |
1.46 |
| 96 |
M Rahul, SP Sivapirakasam, BR Vishnu, SL Aravind, Sreejith Mohan |
Experimental investigation on gripper force of electrically activated non-contact swirl vane gripper |
Materials Today: Proceedings |
46 |
9636-9640 |
2021 |
1.46 |
| 95 |
R Anandakumar, KR Balasubramanian, SP Sivapirakasam, Kuruva Gopanna, D Dinagaran |
Materials Today: Proceedings |
46 |
9604-9609 |
2021 |
1.46 |
|
| 94 |
G Jeyabalaganesh, SP Sivapirakasam, KR Balasubramanian, SL Aravind |
Materials Today: Proceedings |
46 |
9544-9549 |
2021 |
1.46 |
|
| 93 |
R Shankar, KR Balasubramanian, SP Sivapirakasam |
Hot corrosion behavior of nanostructured and conventional HVOF Cr3C2NiCrBSi coatings on superalloy |
Materials Today: Proceedings |
46 |
9529-9536 |
2021 |
1.46 |
| 92 |
RK Raajesh Kannan, SP Sivapirakasam, BR Vishnu, M Rahul, KR Balasubramanian, Sreejith Mohan |
Materials Today: Proceedings |
46 |
9246-9251 |
2021 |
1.46 |
|
| 91 |
M Rahul, SP Sivapirakasam, BR Vishnu, KR Balasubramanian, Sreejith Mohan |
Materials Today: Proceedings |
46 |
9239-9245 |
2021 |
1.46 |
|
| 90 |
K Premkumar, KR Balasubramanian, SP Sivapirakasam, R Shankar |
Oxidation resistance of Ni-Cr-TiO2 powder HVOF coating on carbon steel at elevated temperature |
Materials Today: Proceedings |
46 |
9194-9200 |
2021 |
1.46 |
| 89 |
R Ruban, S Latha, SP Sivapirakasam, VS Srinivasan, GV Prasad Reddy |
Materials Today: Proceedings |
46 |
9154-9158 |
2021 |
1.46 |
|
| 88 |
R Shankar, KR Balasubramanian, SP Sivapirakasam, K Ravikumar |
ANN and RSM models approach for optimization of HVOF coating |
Materials Today: Proceedings |
46 |
9201-9206 |
2021 |
1.46 |
| 87 |
D Dinagaran, KR Balasubramanian, SP Sivapirakasam |
Behavior Based Safety Approach to Improve Workplace Safety in Multistory Building Construction |
Advanced Science, Engineering and Medicine |
12 |
1491-1499 |
2020 |
0.987 |
| 86 |
K Harisivasri Phanindra, M Sreenivasa Rao, SP Sivapirakasam, Muralimohan Cheepu |
IOP Conference Series: Materials Science and Engineering |
998 |
012069 |
2020 |
0.48 |
|
| 85 |
SL Aravind, SP Sivapirakasam, KR Balasubramanian, M Surianarayanan |
Thermo-kinetic studies on azodicarbonamide/potassium periodate airbag gas generants |
Process Safety and Environmental Protection |
144 |
15-22 |
2020 |
7.926 |
| 84 |
SP Sivapirakasam, K Harisivasri Phanindra, J Rohin, SL Aravind |
Impact Sensitivity of Pyrotechnics: A Model Based on Activation Energy |
Combustion, Explosion, and Shock Waves |
56 |
592-600 |
2020 |
0.946 |
| 83 |
Nandakumar Subramanian, Sivapirakasam Suthangathan Paramashivan, Surianarayanan Mahadevan, Vijayaraghavan Renganathan |
Journal of Thermal Analysis and Calorimetry |
141 |
2347-2354 |
2020 |
4.626 |
|
| 82 |
M Senthilkumar, KR Balasubramanian, Ravi Kumar Kottala, SP Sivapirakasam, L Maheswari |
Characterization of form-stable phase-change material for solar photovoltaic cooling |
Journal of Thermal Analysis and Calorimetry |
141 |
2487-2496 |
2020 |
4.626 |
| 81 |
R Anandakumar, KR Balasubramanian, SP Sivapirakasam, Kuruva Gopanna |
IOP Conference Series: Materials Science and Engineering |
912 |
062019 |
2020 |
0.48 |
|
| 80 |
S Venkatesh, R Suresh Kumar, SP Sivapirakasam, M Sakthivel, D Venkatesh, S Yasar Arafath |
Powder Technology |
371 |
115-129 |
2020 |
5.134 |
|
| 79 |
Vishnu B Rajeswari, Sivapirakasam Suthangathan Paramashivan, Sreejith Mohan, Shaju K Albert, M Rahul |
Effect of substituting fine rutile of the flux with nano TiO2 on the improvement of mass transfer efficiency and the reduction of welding fumes in the stainless steel SMAW electrode
|
High Temperature Materials and Processes |
39 |
117-123 |
2020 |
0.66 |
| 78 |
Aravind Surendran Lathika, SP Sivapirakasam Suthangathan Paramashivan, Balasubramanian Karuppudaiyar Ramasamy, Surianarayanan Mahadevan |
Process Safety and Environmental Protection |
133 |
348-357 |
2020 |
7.926 |
|
| 77 |
D Dinagaran, KR Balasubramanian, SP Sivapirakasam, Kuruva Gopanna |
Workplace safety improvement through quality control circle approach in heavy engineering industry |
Recent Advances in Mechanical Engineering |
- |
175-189 |
2020 |
1.316 |
| 76 |
Sreejith Mohan, Sivakumar S Nair, AV Ajay, MS Senthil Saravanan, BR Vishnu, SP Sivapirakasam, M Surianarayanan |
Materials Today: Proceedings |
27 |
2492-2497 |
2020 |
1.46 |
|
| 75 |
RK Raajesh Kannan, SP Sivapirakasam, BR Vishnu, M Rahul, Sreejith Mohan |
Materials Today: Proceedings |
27 |
2052-2055 |
2020 |
1.46 |
|
| 74 |
SP Sivapirakasam, K HariSivaSri Phanindra, M Surianarayanan |
Process Safety Progress |
38 |
12023 |
2019 |
1.344 |
|
| 73 |
Surendran Lathika Aravind, Sivapirakasam Suthangathan Paramashivan, Surianarayanan Mahadevan |
Thermo-kinetic studies of NaN3/KNO3 air bag gas generant mixture |
Journal of Thermal Analysis and Calorimetry |
136 |
2183-2193 |
2019 |
4.626 |
| 72 |
SP Sivapirakasam, Pramod Soni, M Surianarayanan, KR Balasubramanian |
Thermochimica acta |
675 |
100-106 |
2019 |
3.17 |
|
| 71 |
Albin Joseph, Sreejith Mohan, CS Sujith Kumar, Arun Mathew, Shijo Thomas, BR Vishnu, SP Sivapirakasam |
Experimental Thermal and Fluid Science |
103 |
37-50 |
2019 |
3.232 |
|
| 70 |
D Dinagaran, KR Balasubramanian, SP Sivapirakasam, Kuruva Gopanna |
International journal of human factors and ergonomics |
6 |
249-272 |
2019 |
0.912 |
|
| 69 |
SP Sivapirakasham, K Harisivasri Phanindra, Mahadevan Surianarayanan, KR Balasubramanian |
Materials Science Forum |
969 |
55-61 |
2019 |
0.48 |
|
| 68 |
R Shankar, KR Balasubramanian, SP Sivapirakasam |
Materials Science Forum |
969 |
48-54 |
2019 |
0.48 |
|
| 67 |
SP Sivapirakasam, K Harisivasri Phanindra, Mahadevan Surianarayanan, KR Balasubramanian |
Materials Science Forum |
969 |
41-47 |
2019 |
0.48 |
|
| 66 |
K Harisivasri Phanindra, SP Sivapirakasham, KR Balasubramanian, Mahadevan Surianarayanan |
Materials Science Forum |
969 |
146 -151 |
2019 |
0.48 |
|
| 65 |
D Dinagaran, KR Balasubramanian, SP Sivapirakasam, K Gopanna |
Discomfort and postural analysis of flux cored arc welding machine operators |
Journal of Ergonomics Studies and Research |
1 |
103 |
2019 |
- |
| 64 |
Aravind S L, S P Sivapirakasam, Suriyanarayanan |
Thermo-kinetic studies of NaN3/KNO3 air bag gas generant mixture |
Journal of Thermal Analysis and Calorimetry |
136 |
2183 –2193 |
2018 |
4.626 |
| 63 |
Rao M, Jaganmohan, Sivapirakasam S P, Arora Gyan, K Harisivasri, Phanindra |
Vibration Analysis of a Semi Floor Bus Seating System using the Neural Network |
Journal of Advanced Research in Dynamical and Control Systems |
10 |
1736-1743 |
2018 |
0.411 |
| 62 |
MJ Rao, SP Sivapirakasam, K Sankaranarayanasamy |
Whole body vibration of the midibus driver with different seating condition |
IOP Conference Series: Materials Science and Engineering |
402 |
012115 |
2018 |
0.48 |
| 61 |
MJ Rao, SP Sivapirakasam, G Arora |
Whole body vibration analysis for children in midi school bus |
IOP Conference Series: Materials Science and Engineering |
402 |
012114 |
2018 |
0.48 |
| 60 |
BR Vishnu, SP Sivapirakasam, KK Satpathy, Shaju K Albert, Gopa Chakraborty |
Journal of Manufacturing Processes |
34 |
713-720 |
2018 |
5.684 |
|
| 59 |
BR Vishnu, SP Sivapirakasam, KK Satpathy, Shaju K Albert, Gopa Chakraborty |
Process Safety and Environmental Protection |
114 |
334-346 |
2018 |
7.926 |
|
| 58 |
KR Balasubramanian, SP Sivapirakasam, Vamshi Krishna |
Fatigue evaluation in manual handling using surface EMG and ergonomic design of trolley |
Ergonomics International Journal |
2 |
145-154 |
2018 |
1.957 |
| 57 |
K Harisivasri Phanindra, SP Sivapirakasam, Pramod Soni, M Surianarayanan, KR Balasubramanian |
Thermochimica Acta |
18 |
30805 |
2018 |
3.17 |
|
| 56 |
SP Sivapirakasam, Sreejith Mohan, MC Santhosh Kumar, Ashley Thomas Paul, M Surianarayanan |
International Journal of Occupational and Environmental Health |
23 |
128-142 |
2017 |
1.195 |
|
| 55 |
S.P. Sivapirakasam, Sreejith Mohan, M.C. Santhosh kumar, and M. Surianarayanan |
Modeling of fume formation from shielded metal arc welding process”, The Minerals, Metals & Materials Society and ASM International 2017 |
Metallurgical and materials transactions b |
48 |
1268-1278 |
2017 |
2.5 |
| 54 |
Sreejith Mohan, Sivapirakasam. S.P, M.C.Santhosh Kumar, Surianarayanan. M |
Application of Taguchi method in the optimization of process parameters for a sol–gel-derived nano-alumina film |
Journal of Material design and Applications |
230 |
574-585 |
2016 |
0.746 |
| 53 |
Sivapirakasam. S.P, M. Sreejith, M.C.Santhosh Kumar, Surianarayanan. M. |
Welding fume reduction by nano alumina coating on electrodes- towards green welding process |
Journal of Cleaner Production |
108 |
131-144 |
2015 |
9.14 |
| 52 |
Sreejith Mohan, Sivapirakasam. S.P, M.C.Santhosh Kumar, Surianarayanan. M. |
Welding fumes reduction by coating of nano- TiO2on electrodes |
Journal of Materials Processing Technology |
219 |
237-247 |
2015 |
5.2 |
| 51 |
Dr. K R Balasubramanian, Dr.S P Sivapirakasam, Jose Mathew |
Analysis of Chemical Degradative Effects on Low Voltage PVC Insulation using DSC |
Applied Mechanics and Materials |
592-594 |
2475-2480 |
2014 |
|
| 50 |
S.P.Sivapirakasam, S.Thiyagarajan, P.Bineesh, Jose mathew, M.Surianarayanan, |
Hazard Identification in Electrical Discharge Machining (EDM) Process Using What-If Analysis |
Applied Mechanics and Materials |
592-594 |
2508-2512 |
2014 |
|
| 49 |
Dr. K R Balasubramanian, Dr.S P Sivapirakasam, Jose Mathew, |
Analysis of Chemical Degradative Effects on Low Voltage PVC Insulation using DSC |
Applied Mechanics and Materials |
592-594 |
2475-2480 |
2014 |
|
| 48 |
Dr.S.P.Sivapirakasam, A.Afsal Khan, Mane Yogesh G, Dr. R.Anand, |
Microcalorimetry and Kinetics of Biodiesel |
Applied Mechanics and Materials |
592-594 |
1647-1651 |
2014 |
|
| 47 |
K. K.R. Balasubramanian, S. P. Sivapirakasam, Nanda Naik Korra,Kranti Kumar dhruw, |
Study of Posture and discomfort in handling machines in manufacturing industry |
Applied Mechanics and Materials |
592-594 |
2552- 2556 |
2014 |
3.8 |
| 46 |
M Jaganmohan Rao, S.P Sivapirakasam, K.R.Balasubramanian,Sreenath K.T. |
Investigation of Whole-body vibration on Urban Midi Bus |
Applied Mechanics and Materials |
592-594 |
2066-2070 |
2014 |
3.88 |
| 45 |
Sridhar V P , Suriyanarayanan M, Sivapirakasam S P, Mandal A B |
Water induced thermal decomposition of pyrotechnic mixtures- Thermo kinetics and explosion pathway |
Journal of Loss Prevention in the Process Industries, |
30 |
275-281 |
2014 |
3.91 |
| 44 |
Sivapirakasam.S.P, Nalla Mohammed.M, Surianarayanan.M, |
Experimental diagnosis on frictional initiation of a matchhead composition at differentin-process contact materials |
Propellants, Explosives, Pyrotechnics |
39 |
125-132 |
2014 |
1.8 |
| 43 |
S.P.Sivapirakasam, S Thiyagarajan, P Bineesh, Jose Mathew, M Surianarayanan, |
Hazard Identification in Electrical Discharge Machining (EDM) Process Using What-If Analysis |
Applied Mechanics and Materials |
592-594 |
2513-2517 |
2014 |
0.15 |
| 42 |
S.P.Sivapirakasam, S.Thiyagarajan, Jose Mathew, M.Surianarayanan and A.S. Sathya Sai Nathan4 |
Investigation of Environment and Machining Aspects in Electrical Discharge Machining (EDM) Using Different Work pieces and Tool Electrode |
Applied Mechanics and Materials |
592-594 |
2513-2517 |
2014 |
0.15 |
| 41 |
N Sozhan, T Senthilvelan, T Kaliyappan, E Vijayakrishna Rapaka, S.P.Sivapirakasam |
Experimental Investigations on a 1.00 m2 Solar Gel Pond |
Applied Mechanics and Materials |
592-594 |
2360-2364 |
2014 |
0.15 |
| 40 |
Sreejith Mohan, S.P. Sivapirakasam, P Bineesh, KK Satpathy |
Strategies for Controlling Welding Fumes at the Source-A Review |
Applied Mechanics & Materials |
592-594 |
2539-2545 |
2014 |
|
| 39 |
Sivapirakasam. S.P, Nalla Mohamed. M, Surianarayanan. M, Sridhar.V.P, |
Evaluation of thermal hazards and thermo-kinetic parameters of a matchhead composition by DSC and ARC |
Thermochimica Acta, |
557 |
13-19 |
2013 |
3.37 |
| 38 |
Nalla Mohamed, M., Sivapirakasam, S. P. and Surianarayanan, M., |
Investigation on the Friction Sensitivity of a Matchhead Composition Influenced by the Surface Roughness of Contact Materials. Propellants |
Explosives, Pyrotechnics.; |
|
201100159 |
2013 |
1.87 |
| 37 |
Sivapirakasam. S.P, Nalla Mohamed. M, Surianarayanan. M, |
Numerical simulation of impact initiation of a matchhead composition for different in-process contact materials |
Combustion and Flame |
160 |
2573-2584 |
2013 |
5.76 |
| 36 |
Sridhar V P , Suriyanarayanan M, Sivapirakasam S P, Mandal A B, |
Accelerating rate calorimeter studies of water-induced thermal hazards of fireworks tip mixture |
J Therm Anal Calorim |
112 |
1335-1341 |
2013 |
3.45 |
| 35 |
S.P.Sivapirakasam, KR Balasubramanian, R Anand, B Venkatesh, GR Kannan, |
ASME 2012 International Mechanical Engineering Congress and Exposition |
|
953-957 |
2012 |
|
|
| 34 |
S.P.Sivapirakasam, R Anand, GR Kannan, KR Balasubramanian, |
ASME 2012 International Mechanical Engineering Congress and Exposition |
|
37-42 |
2012 |
|
|
| 33 |
M.Mohamed Musthafa, S.P.Sivapirakasam, M.Udayakumar, K.R.Balasubramanian, |
Effects of Al2O3 coating on diesel engine performance, combustion, and emission characteristics fueled by pongamia methyl ester and its blends with diesel |
AIChE - Environmental Progress & Sustainable Energy Journal |
31 |
147-156 |
2012 |
2.43 |
| 32 |
M.Mohamed Musthafa, S.P.Sivapirakasam, M.Udayakumar, |
A comparative study of Al2O3 coated LHR engine characteristic using rice bran and mahua methyl ester as a fuel |
International Journal of Vehicle Design |
59 |
182-195 |
2012 |
1.77 |
| 31 |
M.S.Alphin, K.Sankaranarayanasamy, S.P.Sivapirakasam |
Segmental vibration transmissibility of seated occupant from lumped parameter models |
Journal of Vibration and Control |
18 |
1683-1689 |
2012 |
2.63 |
| 30 |
V.P.Sridhar, M.Surianarayanan, S.P.Sivapirakasam, Asit Baran Mandal |
Adiabatic thermokinetics and process safety of pyrotechnic mixtures |
Journal of Thermal Analysis and Calorimetry, |
109 |
1387-1395 |
2012 |
3.45 |
| 29 |
Nalla Mohamed.M, Sivapirakasam.S.P, Surianarayanan.M |
Experimental investigation on the impact sensitivity of a match head composition influenced by the surface roughness of in-process contact materials |
Process Saf. Environ. |
91 |
343-350 |
2012 |
7.926 |
| 28 |
M Shahul Hameed, S.P.Sivapirakasam, KR Balasubramanian, R Nagalakshmi |
Investigations on Fume Formation Rate in Shielded Metal Arc Welding Process Using Different Electrodes |
Advanced Materials Research |
383 |
4672-4677 |
2012 |
|
| 27 |
S.Thiyagarajan, S.P.Sivapirakasam, Jose Mathew and M. Surianarayanan, |
Experimental Investigation on Manufacturing and Environmental Aspects of Electrical Discharge Machining Process Using Graphite Electrode |
Advance Materials Research |
433-440 |
655-659 |
2012 |
|
| 26 |
S.P.Sivapirakasam, Jose Mathew, M. Surianarayanan, |
Mathematical modeling of aerosol emission rate from die sinking electrical discharge machining process |
Applied Mathematical Modeling |
36 |
1493-1503 |
2012 |
2.25 |
| 25 |
M. MohamedMusthafa, S.P. Sivapirakasam, M. Udayakumar, |
Comparative studies on fly ash coated low heat rejection diesel engine on performance and emission characteristics fueled by rice bran and pongamia methyl ester and their blend with diesel, |
Energy |
36 |
2343-2351 |
2011 |
8.85 |
| 24 |
M.Pandian, S.P.Sivapirakasam, M.Udayakumar, |
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel-diesel blend using response surface methodology |
Applied Energy |
88 |
2663-2676 |
2011 |
11.46 |
| 23 |
G.R.Kannan, K.R.Balasubramanian, S.P.Sivapirakasam, R. Anand, |
Studies on biodiesel production and its effect on DI diesel engine performance, emission and combustion characteristics, |
International Journal of Ambient Energy |
|
Jan-15 |
2011 |
1.08 |
| 22 |
M.S.Alphin, K.Sankaranarayanasamy, S.P.Sivapirakasam |
Experimental investigation to study the influence of handle diameter on low frequency hand arm vertical vibration, |
Journal of Human Factors and Ergonomics in Manufacturing & Service Industries |
|
|
2011 |
1.69 |
| 21 |
S.P.Sivapirakasam, Jose Mathew, M.Surianarayanan |
Multi-attribute decision making for green electrical discharge machining |
Expert Systems with Applications |
38 |
8370-8374 |
2011 |
2.24 |
| 20 |
S.P.Sivapirakasam, Jose Mathew, M.Surianarayanan, |
Constituent analysis of aerosol generated from die sinking electrical discharge machining process |
Process Safety and Environmental Protection |
89 |
141-150 |
2011 |
2.5551 |
| 19 |
S.P.Sivapirakasam, Jose Mathew, M. Surianarayanan, |
Effect of process parameters on the breathing zone concentration of gaseous hydrocarbons- A study on electrical discharge machining process |
Human and Ecological Risk Assessment, |
17 |
Jan-17 |
2011 |
1.096 |
| 18 |
M.Mohamed Musthafa, S.P.Sivapirakasam, M.Udayakumar, |
Experimental investigation on effects of the low heat rejection diesel engine running on jatropha methyl ester |
Journal of Environmental Research and Development |
4 |
811-821 |
2010 |
0.453 |
| 17 |
M.Mohamed Musthafa, S.P.Sivapirakasam, M. Udayakumar |
Performance and emission characteristics of LHR CI engine fueled with rice bran oil as biodiesel |
International Journal of Recent Trends in Engineering |
4 |
01-May |
2010 |
4.4 |
| 16 |
M.Pandian, S.P.Sivapirakasam, M.Udayakumar |
An experimental investigation on the performance and emission characteristics of a twin cylinder DI compression ignition engine employing bio-diesel blend as fuel at different injection timings and injection pressures |
International Journal of Renewable Energy Technology |
2 |
279-293 |
2010 |
1.79 |
| 15 |
K.R.Balasubramanian, K.Sankaranarayanasamy, T.Suthakar, S.P.Sivapirakasam, G.Buvanashekaran, |
Mathematical modelling and optimisation of laser welding of butt joints, |
International Journal of Computational Materials Science and Surface Engineering |
3 |
321-335 |
2010 |
|
| 14 |
M.Pandian, S.P.Sivapirakasam, M.Udayakumar, |
Investigations on emission characteristics of the pongamia biodiesel–diesel blend fuelled twin cylinder compression ignition direct injection engine using exhaust gas recirculation methodology and dimethyl carbonate as additive |
Journal Of Renewable And Sustainable Energy |
2 |
01-Dec |
2010 |
2.41 |
| 13 |
M.Mohamed Musthafa, S.P.Sivapirakasam, M.Udayakumar, |
A comparative evaluation of Al2O3 coated low heat rejection diesel engine performance and emission characteristics using fuel as rice bran and pongamia methyl ester |
J. Renewable Sustainable Energy |
2 |
53105 |
2010 |
2.41 |
| 12 |
M.S.Alphin., K.Sankaranarayanasamy, S.P.Sivapirakasam |
Experimental evaluation of whole body vibration exposure from tracked excavators with hydraulic breaker attachment in rock breaking operations |
Journal of Low Frequency Noise, Vibration And Active Control, |
29 |
101-110 |
2010 |
2.36 |
| 11 |
S.P.Sivapirakasam, M.Surianarayanan, F.Chandrasekaran, |
Thermal characterization of pyrotechnic flash compositions, |
Science and Technology of Energetic Materials |
71 |
Nov-16 |
2010 |
0.333 |
| 10 |
R. Nagalakshmi, S.P.Sivapirakasam, K.R.Balasubramanian, P.V.N.Maheswara Rao, |
A model for prediction of fume formation rate in gas metal arc welding |
WRI JOURNAL |
31 |
14-21 |
2010 |
1.44 |
| 09 |
Jose Mathew, S.P.Sivapirakasam, M.Surianarayanan, |
Analysis of aerosol emission and hazard evaluation of Electrical Discharge Machining (EDM) process, |
Industrial Health, |
48 |
478-486 |
2010 |
2.17 |
| 08 |
Jose Mathew, S.P.Sivapirakasam, M.Surianarayanan, |
Evaluation of occupational exposure to aerosol emitted from die sinking electrical discharge machining process, |
International Journal of Environment and Health |
4 |
Jan-17 |
2010 |
1.93 |
| 07 |
K.R.Balasubramanian, T.Suthakar, K.Sankaranarayanasamy, G.Buvanashekaran, S.P. Sivapirakasam |
Mathematical modelling and optimisation of laser welding of butt joints |
International Journal of Computational Materials Science and Surface Engineering |
3 |
321-335 |
2010 |
0.167 |
| 06 |
S.P.Sivapirakasam, M Surianarayanan, GS Venkataratnam, P Nagaraj, |
Hazard evaluation technique for Firework compositions, |
Indian Chemical Engineering Congress |
126 |
|
2009 |
1.091 |
| 05 |
S.P.Sivapirakasam, M Surianarayanan, G Swaminathan, |
Hazard assessment for the safe storage, manufacturing and handling of flash compositions, |
Journal of Loss Prevention in the process industries |
22 |
254-256 |
2009 |
3.6 |
| 04 |
S.P. Sivapirakasam, M Surianarayanan |
Experimental investigation of mechanical sensitivity and noise level for different pyrotechnic flash compositions, |
Science and Technology of Energetic Materials: journal of the Japan Explosive Society |
70 |
140-144 |
2009 |
0.586 |
| 03 |
S.P. Sivapirakasam, M Surianarayanan, R Vijayaraghaven, |
Journal of Pyrotech |
23 |
61 |
2006 |
1.88 |
|
| 02 |
S.P.Sivapirakasam, Surianarayanan, GS Venkataratnam, P Nagaraj |
Impact sensitiveness analysis of pyrotechnic flash compositions, |
Journal of Pyrotech |
21 |
52 |
2005 |
1.88 |
| 01 |
S.P.Sivapirakasam, M Surianarayanan, F Chandrasekaran, G Swaminathan, |
Journal of thermal analysis and calorimetry, |
78 |
799-808 |
2004 |
4.62 |
(B) Conferences/Workshops/Symposia Proceedings:
|
Author(s) |
Title of Abstract/ Paper |
Title of the Proceedings |
Page numbers |
Conference Theme |
Venue |
Year |
|
M.Veeramani, S.P.Sivapirakasam, M.Anandan, |
Road and traffic engineering, |
National seminar on Road Safety at IRTT |
86 |
National seminar on Road Safety at IRTT |
|
2001 |
|
M.Anandan M.Veeramani, S.P.Sivapirakasam |
Design of a safety training program for drivers |
National seminar on Road Safety at IRTT |
42 |
National seminar on Road Safety at IRTT |
|
2001 |
|
S.P.Sivapirakasam M.Veeramani, M.Anandan, |
Road accident analysis by boolean algebra |
National seminar on Road Safety at IRTT |
82 |
National seminar on Road Safety at IRTT |
|
2001 |
|
M.Veeramani, S.P.Sivapirakasam, M.Anandan, G.S.Venkataratnam |
Safe storage and handling of pyrotechnic chemicals |
I.I.Ch.E |
113 |
CHEMCON 2001 |
|
2001 |
|
S.P.Sivapirakasam, G.S.Venkataratnam, P.Nagaraj, S.Vengatesh Janakiraman, |
Hazard evaluation techniques for fireworks composition, |
International Conference on CHEMICON |
126 |
|
|
2002 |
|
S.P.Sivapirakasam, M.Veramani, S.Ravindran, M.Surianarayanan, A.Noorul Haq, |
Thermal hazard analysis in the manufacturing of fireworks product |
International Conference of 3rd Fire India International |
246-252 |
|
|
2002 |
|
M.Veeramani, S.Ravindran, S.P.Sivapirakasam, |
Assessment of hazards in fireworks industry by safety audit |
International Conference on ISQUER |
|
|
|
2003 |
|
S.P.Sivapirakasam, P.Nagaraj, A.Noorul Haq, |
Design of experiments in pickling plant application |
International Conference on ISQUER |
|
|
|
2003 |
|
Kannan, S.P.Sivapirakasam, M.Surianarayanan, |
Thermo kinetics of cracker mixtures using differential scanning calorimeter |
Fourteenth National Symposium on thermal analysis |
|
|
Mumbai |
2004 |
|
Ramesh Prabhu, S.P.Sivapirakasam, M.Surianarayanan, |
Thermal hazards of cracker mixture using DSC |
Fourteenth National Symposium on thermal analysis |
|
|
Mumbai |
2004 |
|
S.P.Sivapirakasam, Kannan, |
Assessment and control of electrical risks in industries |
SHE-2004 |
|
|
|
2004 |
|
S.P.Sivapirakasam |
Hazard quantification using thermal analysis techniques, National conference on Emerging Trends in Thermal Engineering |
Competitive manufacturing and management TECM2005 |
|
|
Chennai |
2005 |
|
S.P.Sivapirakasam |
Thermal Analysis of pyrotechnic flash composition using DSC, National conference on Emerging Trends in Thermal Engineering |
Competitive manufacturing and management TECM2005 |
|
|
Chennai |
2005 |
|
S.P.Sivapirakasam, |
Hazard evaluation and risk management of firework powders |
TECM2005 |
|
National conference on Emerging Trends in Thermal Engineering |
Chennai |
2005 |
|
R.Vikrant, S.P.Sivapirakasam, M.Surianarayanan |
Interrelation between mechanical sensitiveness and thermal decompositions of a pyrotechnic cracking reaction-A statistical analysis |
|
|
|
Jaipur |
2006 |
|
A.Asmith shifa, S.P.Sivapirakasam, M.Surianarayanan, |
Fireworks industry hazardous waste and its management, Emerging Trends in Thermal Engineering |
Competitive Manufacturing and Management (TECM) |
|
|
Chennai |
2007 |
|
K Preepkumar, B.Gnanasundarajeyaraja, S.P.Sivapirakasam, |
Development of software for fault tree analysis and event tree analysis |
National Conference on Emerging Trends in Materials Manufacturing and Design, |
|
|
Sivakasi |
2007 |
|
Rubagachandiram, S.P.Sivapirakasam, M.Surianarayanan, |
Hazard waste disposal, National Conference on Emerging Trends in Materials Manufacturing and Design |
|
|
|
Sivakasi |
2007 |
|
R.Nagalakshmi, J.Premnath, S.P.Sivapirakasam, |
Occupational Exposure Assessment of Welding Fumes During Manual Metal Arc Welding, Symposium On Joining Of Materials |
SOJOM |
|
|
|
2008 |
|
N.Rajasekharan, J.Premnath, S.P.Sivapirakasam, R.Nagalakshmi, |
Evaluation of welding fumes during MMAW process using electrode E 6013, Symposium On Joining Of Materials |
SOJOM |
|
|
|
2008 |
|
M. Surianarayanan, S.P.Sivapirakasam, G.Swaminathan, |
Accident data analysis and hazard assessment in fireworks manufacture |
Third International Symposium on Energetic |
24-25 |
Materials and their Applications |
|
2008 |
|
S.P.Sivapirakasam, M.Surianarayanan, |
Experimental investigation of mechanical sensitivity and noise level for different pyrotechnic |
Third International Symposium on Energetic Materials and their Applications |
24-25 |
|
|
2008 |
|
S. P. Sivapirakasam, M. Surianarayanan, F. Chandrasekaran, |
Thermal characterization of pyrotechnic flash compositions |
Third International Symposium on Energetic Materials and their Applications |
24-25 |
|
|
2008 |
|
Jose Mathew, S.P.Sivapirakasam, M.Surianarayanan, C.Pandivelan, |
Safe and green Electrical Discharge Machining (EDM) – A Review. |
AIMTDR Conference |
149-154 |
|
Chennai |
2008 |
|
Jose Mathew, S.P.Sivapirakasam, K.R.Balasubramanian, K. Renjith |
Analysis of total aerosol emission from electrical discharge machining process |
International Conference on Advances in Mechanical Engineering |
3-5 |
|
Gujarat, |
2009 |
|
M.Pandian, S.P.Sivapirakasam, M.Udayakumar, |
Influence of injection timing on NOx emission from the naturally aspirated twin cylinder CIDI engine using bio-diesel blends as fuel, |
International Conference on Emerging Research and Advances in Mechanical Engineering |
|
|
Chennai |
2009 |
|
M.Pandian, S.P.Sivapirakasam, M.Udayakumar, |
Effect of protrusion length of injector on performance and emission characteristics of a twin cylinder diesel Engine employing bio-diesel blend as fuel |
International Conference on Advances in Mechanical and Building Science |
|
|
Vellore |
2009 |
|
SridharVethathiriPakkirisamy, S.P.Sivapirakasam, Surianarayanan Mahadevan, |
Adiabatic calorimeter and fireworks compositions |
|
|
|
|
2009 |
|
M.Pandian, S.P.Sivapirakasam, M.Udayakumar, |
Effect of protrusion length of injector on performance and emission characteristics of a twin cylinder diesel Engine employing bio-diesel blend as fuel, |
International Conference on Advances in Mechanical and Building Science |
|
|
Vellore |
2009 |
|
SridharVethathiriPakkirisamy, S.P.Sivapirakasam, Surianarayanan Mahadevan, |
Adiabatic calorimeter and fireworks compositions, |
CHEMCON |
|
|
|
2009 |
|
K.R.Balasubramanian, T.Suthakar, K.Sankaranarayanasamy, G.Buvanashekaran, S.P. Sivapirakasam, K.Dileep Reddy, |
Analysis of heat transfer during the laser beam welding of AISI 304 Stainless Steel using CFD |
International Welding Symposium |
|
|
Mumbai, |
2010 |
|
S.P.Sivapirakasam, R.Nagalakshmi, K.R.Balasubramanian, P.V.N.Maheswara Rao, |
Assessment of welding fumes using ventilation parameters during GMAW welding Process, |
International Welding Symposium |
|
|
Bombay |
2010 |
|
M.S.Alphin, K.Sankaranarayanasamy, S.P.Sivapirakasam, |
Whole body vibration in Tracked Excavators with Hydraulic Breaker, |
International Conference on Advances in Industrial Engineering Applications |
|
|
Chennai |
2010 |
|
Sridhar Vethathiri Pakkirisamy, S.P.Sivapirakasam, Surianarayanan Mahadevan, |
Concentration effects on thermal explosive characteristics of Fireworks (chakra inner mixture) |
THERMANS |
|
|
|
2010 |
|
S.Thiyagarajan, S.P.Sivapirakasam, Jose Mathew, M.Surianarayanan, |
Experimental investigation on manufacturing and environmental aspects of Electrical Discharge Machining process using graphite electrode |
International Conference on Manufacturing Science and Technology |
|
|
Singapore |
2011 |
|
M.Shahul Hameed, S.P.Sivapirakasam, K.R.Balasubramanian, R.Nagalakshmi |
Investigations on fume formation rate in shielded metal arc welding process using different electrodes |
International Conference on Manufacturing Science and Technology |
|
|
Singapore |
2011 |
|
Vishnu. B. R, Sivapirakasam. S. P, Shaju. K. Albert, Gopa Chakraborthy, K. K. Satpathy, |
A Characteristic Study on Welding Fumes from Manual Metal Arc Welding Electrodes |
National Welding Seminar |
|
|
|
2015 |
|
Sivapirakasam. S. P, |
Experimental Investigation of Carbon dioxide Sequestration using polyol based nano fluids, EMN Meeting on Microfluidics and Nanofluidics |
|
|
|
|
2016 |
(C) Books & Monographs
|
Author(s) |
Title of Book/Monograph |
Name of Publishers |
Year of Publication |
ISSN/ISBN Number |
|
Sreejith Mohan, Albin Joseph, Akash Poovathinkal, KH Akhilesh, Jerin Reji, Jithin Ninan Idicula, BR Vishnu, SP Sivapirakasam |
Performance Evaluation of Linear Solar Collector Using Hybrid Nanofluid |
Springer, Singapore |
2021 |
978-981-15-6618-9 |
|
S. Venkatesh, S. P. Sivapirakasam, M. Sakthivel |
Importance of Dust Collectors in Waste Management and Recycling in Industries |
CRC Press |
2020 |
978-100-30-5654-6 |
|
Albin Joseph Sreejith Mohan, Akash Poovathinkal, KH Akhilesh, Jerin Reji, Jithin Ninan Idicula, BR Vishnu, SP Sivapirakasam |
Performance Evaluation of Linear Solar Collector Using Hybrid Nanofluid |
Springer Nature |
2020 |
978-981-15-6619-6 |
|
Dr.S.P.Sivapirakasam Dr. K.R.Balasubramanian Dr. R. Anand |
Dynamics of machines and mechanisms, industrial research |
Trans Tech |
2014 |
3038351636 |
|
Dr.S.P.Sivapirakasam Dr. K.R.Balasubramanian Dr. R. Anand |
Advances in Mechanical |
Knowledge Curve |
2014 |
- |