Dr. Vasu M
Name: Dr Vasu M
Designation: Assistant Professor Grade-1
Institution: National Institute of Technology, Tiruchirappalli
Mobile: 9611604276, Office: 0431-2503505
E-mail: mvasu@nitt.edu, vasu.m.manu@gmail.com
Mailing Address: Dr. Vasu M, Assistant Professor, Department of Production Engineering, National Institute of Technology, Tanjore Main Road, NH67, near BHEL, Tiruchirappalli, Tamil Nadu- 620015
Research Area: Machinability Studies and Optimization Techniques, Industrial Engineering and Management, Polymer Additive Manufacturing, Vacuum Arc Melting.
Employment Profile
|
Job Title |
Employer |
From |
To |
|
Assistant Professor Grade - I |
National Institute of Technology Trichy (NITT) |
11/03/2024 |
To till date |
|
Assistant Professor Grade - II |
National Institute of Technology Trichy (NITT) |
21/05/2020 |
11/03/2024 |
|
Assistant Professor |
Srinivas Institute of Technology (SIT), Mangaluru |
22/07/2013 |
30/06/2015 |
|
Assistant Professor |
Sri Revana Siddeshwara Institute of Technology (SRSIT), Bengaluru |
09/07/2012 |
13/07/2013 |
Academic Qualifications
|
Examination |
Board / University |
Year |
Division/ Grade |
Subjects |
|
Doctor of Philosophy |
NITK Surathkal |
2019 |
1st Class |
Machinability Studies |
|
M. Tech |
NITK Surathkal |
2012 |
1st Class |
Manufacturing Engineering |
|
B. E. |
SSIT Tumkur, (VTU) |
2010 |
1st Class |
Industrial Engagement and Management) |
Academic/Administrative Responsibilities
|
Position |
Faculty/Department/Centre/Institution |
From |
To |
|
PhD/MS/QIP Admission Committee Member |
Department level |
2020 |
2022 |
|
Department Project evaluation Committee Member |
Department level |
2020 |
2022 |
|
2023 |
2024 |
||
|
Faculty Advisor and Project coordinator for PG (IEM) |
Department level |
2023 |
2024 |
|
PhD/MS/ICCR Admission Committee Member |
Institute level |
2022 |
To till date |
|
NBA Work Committee Member |
Department level |
2022 |
To till date |
Fellowships
|
Year of Award |
Name of the Fellowship |
Awarding Organization |
From (Month/Year) |
To (Month/Year) |
|
2010-2012 |
GATE scholarship during M.Tech |
MHRD |
June 2010 |
July 2012 |
|
2015-2019 |
Institute fellowship during PhD. |
MHRD |
June 2015 |
March 2019 |
Courses taught at Postgraduate and Undergraduate levels.
Undergraduate Level
- Introduction to production Engineering
- Engineering Graphics
- Work design and Facility Planning
- Operation research
- Industrial Engineering Lab
- Manufacturing Technology-1 Lab
Post Graduate Level
- Advanced Operation Research
- Industrial Engineering & Productivity Management
- Operation Management Lab
Projects guided at Postgraduate Level.
- Shubham Bhardwaj (214220026) “Manpower optimization using MOST study in the logistic center of an automobile company”. (2022)
- Vaibhav Gokul Kodape (214220029) “Analysis and Prediction of Warehouse Demand Using Historical Data with the Help of Machine Learning” (2022)
- Vikas Jaiswal (214220031) “Logistics Improvement on Assembly Lines” (2022).
- Rishabh Raikwar (214221023) “Comparative study of PLA and PETG chiral honeycomb structure” (2023).
- Vaibhav Kumar Garg (214221034) Effect of Wall Thickness on Compressive Properties of Additively Manufactured PETG And PLA Based Honeycomb Structure” (2023).
- Krishna Dev Nayak (214222013), “Study of Acoustic Properties of PETG/Graphene Material” (2024).
- Manjeet Mallick (214222014), “Study of Rheological properties of PETG/Graphene Polymer for 3D Printing” (2024).
Project guided at Undergraduate Level.
- N. Murali Krishna (114117052), Ragavendar. S (114117068), Satheesh. S. D (114117078) “Demand Forecasting and Optimization for A Crowd-Sourced Last-Mile Delivery Company – A Comparative Study” (2021).
- K Sohith (114118042), Seedi Vinay (114118081), S Vinay (114118092), K Prasanth (114118049) “Influence of Reinforcement of Filler in PETG on its Properties” (2022).
- Amritpal (114119007), Anil Kumar (114119010), Ashish Kumar (114119015), Sahul Kumar (114119097) “Effect of heat treatment on the mechanical properties of PETG and PETG reinforced graphene fabricated by FDM technique” (2023).
- Deepak Surya (114119027), Vimalesan T (114119118) “Effect of heat treatment on mechanical properties of Honeycomb Structure PETG and PETG reinforced Graphene Fabricated by FDM Technique” (2023).
- Ayush Tulsyan (114120022), Priyanshu Sunhare (114120085), “Machine learning-based investigation of mechanical properties in ABS reinforced with carbon fiber” (2024).
- Shubham Kumar (114120098), Siddharth Budhia (114120099), “Development and Deployment of a Machine learning-based web application for the investigation of the tensile property of ABS reinforced with carbon fiber” (2024).
PhDs/MS by Research guided
|
PhD/MS |
Name of the Scholar |
Research Area |
Part Time/Full Time |
Year of Award |
|
PhD |
Mr Surjeet Singh Bedi (414120008) |
Additive manufacturing |
Full Time |
2025 |
|
MS |
Mr Prakash G (314922051) |
Additive manufacturing |
Part Time |
On going |
International Conference
- International Conference on Emerging Trends in Materials and Manufacturing Engineering, March 10th-12th 2017, NIT Tiruchirappalli, Tamil Nadu India.
- International Conference on Advances in Materials &Processing: Challenges & Opportunities, Nov 30th - Dec 2nd 2017, IIT Roorkee, India.
- Advances in International Conference on Design, Materials & Manufacture, Jan 29th to 31st Jan 2018 NITK Surathkal, India.
- 8th International Engineering Symposium 13th -15th, March 2019, Kumamoto University, Japan.
- International Conference on Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23), 8th -11th March 2023, Timisoara, Romania (Online Mode)
- 29th International Conference on Processing and Fabrication of Advanced Materials September 06th - 08th, 2023. IIT Tirupathi, India.
- International Conference on Additive Manufacturing (ICAM-2024) 4th-6th March 2024, NITW Warangal, India.
Invited Talks delivered
|
Topic |
Date |
Inviting Organization |
|
Machinability Studies: EN 47 Spring Steel |
01/06/2020 |
Ballari Institute of Technology & Management, Ballari Karnataka |
|
Machinability Studies on EN 47 Spring Steel |
09/07/2020 |
Sri M Visvesvaraya Institute of Technology, Bengaluru Karnataka |
|
Machinability studies using optimization technique |
09/06/2021 |
RNS Institute of Technology, Bengaluru Karnataka |
|
“Next generation of Adopting manufacturing System |
14/07/2021 |
Marian Engineering College, Thiruvananthapuram, Kerala |
|
Designing Inclusive and Sustainable Work Systems |
27/01/2023 |
BHEL-IIIE Trichy Chapter |
|
Machinability studies using optimization techniques |
07/03/2023 |
Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu 641004 |
|
Introduction to Additive Manufacturing Technology |
28/02/2024 |
Raja Rajeswari college of Engineering, Bengaluru |
|
Optimization of Additive Manufacturing Technology |
28/02/2024 |
Raja Rajeswari college of Engineering, Bengaluru |
Workshops Organized
- One day Workshop on JMP Software, 27th January 2022, Department of Production Engineering, NIT Tiruchirappalli (Virtual Mode).
- Workshop under Karyashala Scheme – A SERB Initiative “Developments in Additive Manufacturing: Biomedical, Defence, Space, Construction, and Aerospace Applications” 05th to 9th June 2023, NIT Tiruchirappalli, Tamil Nadu India.
Membership of Learned Societies
|
Type of Membership (Ordinary Member/ Honorary Member / Life Member) |
Organization |
Membership No. with date |
|
Associate Member |
The Institution of Engineers (India) |
AM1953969 Date: 03/09/2020 |
Academic Foreign Visits
|
Country |
Duration of Visit |
Programme |
|
Japan, Kumamoto University |
March 13th -15th 2019 |
8th International Engineering Symposium |
Publications Details
- Vasu M, H Shivananda Nayaka, “Investigation of machinability characteristics on EN47 steel for cutting force and tool wear using optimization technique” Material Research Express (2018).
- Vasu M, H Shivananda Nayaka, Comparative study of coated and uncoated tool inserts with dry machining of EN47 steel using Taguchi L9 optimization technique, AIP Conference Proceedings (2018).
- Vasu M, H Shivananda Nayaka, Investigation of Cutting Force Tool Tip Temperature and Surface Roughness during Dry Machining of Spring Steel, Materials Today: Proceedings (2018).
- Vasu M, H Shivananda Nayaka, Turning process on EN47 spring steel with different tool nose radii using OFAT approach, Advances in Modelling and Analysis A (2018).
- Vasu M, Shivananda Nayaka H, Pradeep V Badiger, Vinyas M “Machinability studies on EN47 spring steel by optimization technique during dry and wet condition” International Journal of Modern Manufacturing Technologies (2019).
- Surjeet Singh Bedi, Vasu Mallesha, Vishwas Mahesh, Vinyas Mahesh and Sathiskumar Anusuya Ponnusami, “Investigation of low-percentage graphene reinforcement on the mechanical behaviour of additively manufactured polyethylene terephthalate glycol composites” Journal of Thermoplastic Composite Materials (2023).
- Surjeet Singh Bedi, Vasu Mallesha, Vishwas Mahesh, Vinyas Mahesh, Sriram Mukunda and Sathiskumar Anusuya Ponnusami, “Thermal characterization of 3D printable multifunctional graphene-reinforced polyethylene terephthalate glycol (PETG) composite filaments enabled for smart structural applications”, Polymer Engineering & Science (2023).
- B. Mallikarjuna, Vasu M Musunuri Shanmukha Vardhan, Harshini G V, “Effect of process parameters on mechanical properties in fused deposition modelling of polyethylene terephthalate glycol”, Procedia structural integrity, (2024).
- Surjeet Singh Bedi, Vasu Mallesha “Investigating Tribological Performance in 3D-Printed Graphene-PETG Composites of Varying Composition”. Journal of Reinforced Plastics and Composites, (2024).
- Surjeet Singh Bedi, Vasu Mallesha “Evaluating the effect of varying infill density and graphene reinforcement on water absorption properties of PETG Composites fabricated via FDM”. (Submitted to Polymer Composites -Under Review)
Book chapter
- Athul Joseph, Vinyas Mahesh, Vishwas Mahesh, Dineshkumar Harursampath, Vasu Mallesha, “Role of 3D Printing in the Fabrication of Composite Sandwich Structures”, Taylor and Francis Group (2022).
- Mallesh, Vasu & Bedi, Surjeet. Additive manufacturing and their influencing factors on the performance of PLA-based biocomposites” (2024).
- Bedi, Surjeet & Mallesh, Vasu. “Influence of various nanofillers on the thermal, physio- chemical, and mechanical properties of the polylactic acid (PLA) based biocomposites”. (2024).
Important Links
WOS: