Journal and Conference Publications


Dr.-Ing. M. Duraiselvam
Professor HAG

International Journal Publications

  1. Muthukrishnan V, Muthukannan Duraiselvam."Redefining Lubrication Sustainability: Surface Modification and Coating-Driven Green Tribology Pathways". Lubricants: (2026) 14(8):287  🔗 Click to View  
  2. Govindan, V., Muthukannan Duraiselvam, Arockiarajan, A. et al. "Auxetic Behavior and Compressive Performance of Additively Manufactured Inconel 718 Tetra-Chiral Structures for Aerospace Turbine Applications". Journal of Materials Engineering and Performance (2026): 1-17 🔗Click to View
  3. Haja Maideen, A., Muthukannan Duraiselvam, Varatharajulu, M. et al. "Taguchi–Opara-Based Multi-attribute Optimization of Electro-Discharge Alloying Parameters for Tungsten-Reinforced Al 7075 Alloy". Journal of Materials Engineering and Performance (2026): 1-20 🔗Click to View
  4. Nazeer, S., Muthukannan Duraiselvam, Arunachalakshi Arockiarajan, and Venkatesh Govindan. "Compression behaviour of LPBF printed re-entrant star auxetic structures: experimental and numerical studies." Rapid Prototyping Journal (2026). 🔗Click to View
  5. Raman, Sakthi Sadhasivam, and Muthukannan Duraiselvam. "Influence of Relative Density on the Microstructure and Mechanical Properties of SS316L Additively Manufactured Auxetic Structures." Journal of Materials Engineering and Performance (2026): 1-18.🔗Click to View
  6. Govindan, Venkatesh, Anand Ramanathan, and Muthukannan Duraiselvam. "Influence of Pulse Frequency on the Metallurgical and Mechanical Characteristics of Welded Joints for Haynes 188 Superalloy by Pulsed Laser Welding." Journal of Materials Engineering and Performance 35, no. 13 (2026): 12513-12531. 🔗Click to View
  7. Dhiliepan R, Muthukannan Duraiselvam. "Experimental investigation on additively manufactured polymeric hybrid auxetic tubes for biomedical applications." Rapid Prototyping Journal 32, no. 3 (2026): 629-647. 🔗Click to View
  8. Nazeer, S., Muthukannan Duraiselvam, Arunachalakasi Arockiarajan, and Venkatesh Govindan. "Deformation behaviour of additive manufactured inconel 718 based auxetic structures for aero- turbine application." Engineering Research Express 7, no. 2 (2025): 025568. 🔗Click to View
  9. Varatharajulu, M., Muthukannan Duraiselvam, GV Krishna Pradeep, and B. Jagadeesh. "Exploring epitaxial grain growth and Marangoni-induced conversion in columnar dendrites: a study of Inconel 718 additive manufacturing via direct laser energy deposition." Surface Review and Letters 32, no. 1 (2025): 2450102. 🔗Click to View
  10. Baskaran, Jagadeesh, Muthukannan Duraiselvam, Riddhi Shukla, and Prashanth Konda Gokuldoss. "Manufacturability and deformation studies on a novel metallic lattice structure fabricated by selective laser melting." Vacuum 222 (2024): 113065. 🔗Click to View
  11. Jagadeesh, B., Muthukannan Duraiselvam, and K. G. Prashanth. "Deformation and energy absorption studies on FBCC and FBCCz lattice structures with symmetrical density gradients produced by L-PBF of Ti-6Al-4V alloy." Materials Today: Proceedings (2024).🔗Click to View
  12. Avinash, S., Vineet Kumar Yadav, and Muthukannan Duraiselvam. "Effect of laser shock peening as a pretreatment on ion nitriding of precipitation hardened stainless steel." Surface Topography: Metrology and Properties 12, no. 1 (2023): 015001. 🔗Click to View
  13. Varatharajulu M, Muthukannan Duraiselvam, G. Jayaprakash, N. Baskar, S. Vijayaraj, K. Anand Babu, “A retrospective analysis on drilling operation and its parameters: a critical review” Surface Review and Letters 30, 10 (2023). 🔗Click to View
  14. Deepu P, Jagadesh T, Muthukannan Duraiselvam, “Investigations into Morphology and Surface Integrity of Micro-Hole during Femtosecond Laser Drilling of Titanium Alloy” Journal of the Brazilian Society of Mechanical Sciences and Engineering 45, 10 (2023). 🔗Click to View
  15. Kannan Ganesa Balamurugan, and Muthukannan Duraiselvam. “Effect of Ti6Al4V Titanium Alloy Coating on Corrosion and Corrosive Wear Resistance of Pure Magnesium by Laser Cladding.” Research Square Platform LLC, (2023). 🔗Click to View
  16. Kannan Ganesa Balamurugan, S. Revathi, K. Rajkumar, and Muthukannan Duraiselvam. “Network Topology Model for Wear Behavior Prediction of Ti6Al4V Clad Magnesium Substrates.” In Lecture Notes in Mechanical Engineering, 809–818. Singapore: Springer Nature Singapore, (2023). 🔗Click to View
  17. Jagadeesh B, Muthukannan Duraiselvam, K.G. Prashanth, “Deformation Behavior of Metallic Lattice Structures with Symmetrical Gradients of Porosity Manufactured by Metal Additive Manufacturing” Vacuum 211 (2023): 111955. 🔗Click to View
  18. Karthick Krishnadass, Muthukannan Duraiselvam, “Laser Surface Modification of Vermicular Cast Iron to Resist Erosion” Lasers in Manufacturing and Materials Processing 10, 2 (2023): 251–265. 🔗Click to View
  19. Jagadeesh B, Muthukannan Duraiselvam, “Investigations on the Compressive Behaviour of Novel Cell Size Graded Primitive Lattice Structure Produced by Metal Additive Manufacturing” Materials Letters 333 (2023): 133643. 🔗Click to View
  20. Deepu P, Jagadesh T, Muthukannan Duraiselvam, Jagadeesh B, “Investigation into Femtosecond Based Laser Ablation and Morphology of Micro-Hole in Titanium Alloy” Optik 274 (2023): 170519. 🔗Click to View
  21. M Varatharajulu, Muthukannan Duraiselvam, G.V. Krishna Pradeep, B. Jagadeesh, “Tool Temperature Thermographic Study on End Milling Magnesium AZ31 Using Carbide Tool” Materials Chemistry and Physics 295 (2023): 127077. 🔗Click to View
  22. Jeyaprakash N, Che-Hua Yang, Sundara Subramanian Karuppasamy, Muthukannan Duraiselvam, “Stellite 6 Cladding on AISI Type 316L Stainless Steel: Microstructure, Nanohardness and Corrosion Resistance” Transactions of the Indian Institute of Metals 76, 2 (2022): 491–503. 🔗Click to View
  23. Jagadeesh, B., Muthukannan Duraiselvam, Arijit Bera, and Astha Arya. “Effect of Laser Micromachining and Laser Shock Peening on the Performance of Inconel Alloy Parts for Aerospace Application.” In Comprehensive Materials Processing, 434–469. Elsevier (2024) 🔗Click to View
  24. Varatharajulu M, Muthukannan Duraiselvam, M Bhuvanesh Kumar, G Jayaprakash, N Baskar, “Multi Criteria Decision Making through TOPSIS and COPRAS on Drilling Parameters of Magnesium AZ91” Journal of Magnesium and Alloys 10, 10 (2022): 2857–2874. 🔗Click to View
  25. Balamurugan, Kannan Ganesa, and Muthukannan Duraiselvam. “Wear Mechanism of Laser Clad Ti6Al4V Alloy on a Pure Magnesium Substrate.” In Lecture Notes in Mechanical Engineering.Singapore: Springer Nature Singapore, 2022.🔗Click to View
  26. Govindarajan Prabu, Muthukannan Duraiselvam, Manickam Matheswaran, Amrish Prabakaran, Tamilmani Jayabalan, Varatharajulu Muthukrishnan, “Laser Surface Texturing for Enhancing Microbial Fuel Cell-Based Electricity Generation from Wastewater” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 236, 5 (2022): 937–948.🔗Click to View
  27. Pradeep, G. V. Krishna, Muthukannan Duraiselvam, K. Sivaprasad, “Tribological Behavior of Laser Surface Melted γ-TiAl Fabricated by Electron Beam Additive Manufacturing” Journal of Materils Engineering and Performance 31, 2 (2022): 1-12.🔗Click to View
  28. Prabu G, Muthukannan Duraiselvam, “Tribological Studies on AlCrFeCuCoNi High Entropy Alloy Surface Coated on Ti-6Al-4V Using Plasma Transferred Arc Technique” Archives of Metallurgy and Materials, (2021), 409–420.🔗Click to View
  29. Kannan Ganesa Balamurugan, Muthukannan Duraiselvam, “Effect of Laser Scan Speed on Microstructure and Mircohardness on Titanium Clad Magnesium” In Lecture Notes in Mechanical Engineering, (2021) 75–84.🔗Click to View
  30. Bagade Vishal Uttamrao, Muthukannan Duraiselvam, Niranjan Sarangi, K. Parthiban, “Effect of Laser Surface Texturing on Coating Adherence and Tribological Properties of CuNiIn and MoS2 Coating” Transactions of the Indian Institute of Metals 75, 1 (2021): 239–250.🔗Click to View
  31. Anaz Khan Muhammed, Annakodi Vivek Anand, Muthukannan Duraiselvam, Koppula Srinivas Rao, Ramachandra Arvind Singh, Subramanian Jayalakshmi, “Thermal Shock Resistance and Thermal Insulation Capability of Laser-Glazed Functionally Graded Lanthanum Magnesium Hexaluminate/Yttria-Stabilised Zirconia Thermal Barrier Coating” Materials 14, 14 (2021): 3865.🔗Click to View
  32. Varatharajulu M, Muthukannan Duraiselvam, G Jayaprakash, N Baskar, P Karthick, R Anbarasu, “Modeling and optimization of hole accuracy and drilling time in Magnesium AZ31 plate” Surface Review and Letters 28, 07 (2021): 2150059.🔗Click to View
  33. Prabu G, Muthukannan Duraiselvam, N. Jeyaprakash, Che-Hua Yang, “Microstructural Evolution and Wear Behavior of AlCoCrCuFeNi High Entropy Alloy on Ti–6Al–4V Through Laser Surface Alloying” Metals and Materials International 27, 7 (2021): 2328–2340.🔗Click to View
  34. Parthiban K, Muthukannan Duraiselvam, Shashank Kumar Jain, Saad Riaz, S. V. Aditya, “Numerical Simulation on the Effect of Cooling Hole Configuration on the Film Cooling Effectiveness in TBC Coated Turbine Vanes” International Journal of Turbo Jet-Engines 38, 2 (2021): 203–212.🔗Click to View
  35. Varatharajulu M, Muthukannan Duraiselvam, K Arun Kumar, C Gabrial Kanniyan, Ramkumar Sathiyamurthy, “Experimental Investigation of the Effect of Independent Parameters in the Face Milling of Aluminum 6082 Alloy” Transactions of the Indian Institute of Metals 74, 3 (2021): 659– 677.🔗Click to View
  36. Arockiarajan A, Muthukannan Duraiselvam, Ramesh Raju, “Advances in Industrial Automation and Smart Manufacturing: Select Proceedings of ICAIASM 2019”. Springer Singapore, 2021.🔗Click to View
  37. Haja Maideen, A, Muthukannan Duraiselvam, M. Varatharajulu, “Surface Modification of Aluminium 7075 by Electrical Discharge Alloying and Influence of Surface Roughness Using RSM” Materials Today: Proceedings 39 (2021): 1440–1449.🔗Click to View
  38. Prakash, F Peter, N Jeyaprakash, Muthukannan Duraiselvam, G Prabu, Che-Hua Yang, “Droplet spreading and wettability of laser textured C-263 based nickel superalloy” Surface and Coatings Technology 397 (2020): 126055.🔗Click to View
  39. Sathiyamurthy Ramkumar, Muthukannan Duraiselvam, P Sevvel, “Acoustic Emission Based Deep Learning Technique to Predict Adhesive Bond Strength of Laser Processed CFRP Composites” FME Transactions 48, 3 (2020): 611–619.🔗Click to View
  40. Pradeep, G. V Krishna, Muthukannan Duraiselvam, Katakam Siva Prasad, Ashfaq Mohammad, “Tribological Behavior of Additive Manufactured γ-TiAl by Electron Beam Melting” Transactions of the Indian Institute of Metals 73, 6 (2020): 1661–1667.🔗Click to View
  41. Bagade, Vishal Uttamrao, Muthukannan Duraiselvam, Niranjan Sarangi, K Parthiban, “Laser Surface Texturing to Enhance CuNiIn Anti-Fretting Coating Adhesion on Ti6Al4V Alloy for Aerospace Application” Lasers in Manufacturing and Materials Processing 7, 2 (2020): 141–153.🔗Click to View
  42. Peter Prakash F, Muthukannan Duraiselvam, S Natarajan, K. G Balamurugan, “Laser Microtexturing of NiCrAlY Coated Nickel-based Superalloy for Improved Adhesion Bond Strength” Lasers in Engineering 46 (2020).🔗Click to View
  43. Sokkalingam R, K Sivaprasad,Muthukannan Duraiselvam, V Muthupandi, K. G Prashanth, “Novel welding of Al0. 5CoCrFeNi high-entropy alloy: Corrosion behavior” Journal of Alloys and Compounds 817, (2020) 153-163.🔗Click to View
  44. Jeyaprakash N, Che-Hua Yang, Muthukannan Duraiselvam, S. Sivasankaran, “Comparative study of laser melting and pre-placed Ni–20% Cr alloying over nodular iron surface” Archives of Civil and Mechanical Engineering 20,1 (2020) 1-12.🔗Click to View
  45. V Anandakrishnan, Sathish S.,Muthukannan Duraiselvam, Dillibabu V., and Balamuralikrishnan N. “Dry Sliding Wear Behavior of Inconel 718 Additively Manufactured by DMLS Technique.” Industrial Lubrication and Tribology 72, no. 4 (2020): 491–496.🔗Click to View
  46. Muthukannan Duraiselvam, A Gurumoorthy, S Karthikeyan, A Arulbrittoraj, “Study the Effect of Roller Hardness on the Surface Properties of Burnished AISI 1211 Steel” International Journal of Computational Materials Science and Surface Engineering Vol.9,1 (2020): 53.🔗Click to View
  47. Adam Khan, M., D. Chellaganesh, M. Uthayakumar, J. T. Winowlin Jappes, and Muthukannan Duraiselvam. “Electrochemical Behaviour and Surface Studies on Austenitic Stainless Steel and Nickel-Based Superalloy Dissimilar Weld Joints.” In Materials Forming, Machining and Tribology, 251–266. Cham: Springer International Publishing, 2019.🔗Click to View
  48. Jeyaprakash N, Che-Hua Yang, Muthukannan Duraiselvam, G Prabu, Sheng-Po Tseng, D Raj Kumar, “Investigation of high temperature wear performance on laser processed nodular iron using optimization technique” Results in Physics 15 (2019) 102585.🔗Click to View
  49. Anil Kumar, S Natarajan, Muthukannan Duraiselvam, S Ramachandra, “Effect of Titanium Dioxide Particles on the Morphology, Mechanical, Wear Properties of the Aluminum Alloy 3003-Based Composites” Arabian Journal for Science and Engineering 44, 12 (2019): 10207–10217.🔗Click to View
  50. Peter Prakash, Muthukannan Duraiselvam, Natarajan S, Kannan Ganesa Balamurugan, “Effect of laser surface texturing on wear resistance of nickel based superalloy” Industrial Lubrication and Tribology 71, 6 (2019): 842–850.🔗Click to View
  51. Sathiyamurthy Ramkumar, Muthukannan Duraiselvam, “Selective Laser Ablation of CFRP Composite to Enhance Adhesion Bonding” Materials and Manufacturing Processes 34, 11 (2019): 1296–1305.🔗Click to View
  52. Selvan, Bellamballi Munivenkatappan Muthamizh, Veeramani Anandakrishnan, Muthukannan Duraiselvam, Sivaraj Sundarameenakshi, “Wear Testing of in Situ Cast AA8011-TiB2 Metal Matrix Composites” Materials Testing 61, 8 (2019): 779–786.🔗Click to View
  53. B.K. Narayanan, Muthukannan Duraiselvam, S. Natarajan, M. A. Khan, “Hot Corrosion and Oxidation Behaviour of a Laser Processed Nickel-based Superalloy”, Lasers in Eng, (2019) 1-18.🔗Click to View
  54. Karuppasamy S, V Sivan, S Natarajan, S. P Kumaresh Babu, Muthukannan Duraiselvam, R Dhanuskodi, “Establishment of Wear Resistant HVOF Coatings for 50CrMo4 Chromium Molybdenum Alloy Steel as an Alternative for Hard Chrome Plating” Journal of The Institution of Engineers (India): Series C 100, 4 (2018): 635–645.🔗Click to View
  55. Haja Maideen A, Muthukannan Duraiselvam, M. Varatharajulu, “Application of Desirability Function Approach for Optimized Process Parameters of Electrical Discharge Alloying of Al 7075 with Nickel Powder” Transactions of the Indian Institute of Metals 72, 7 (2019): 1901–1916.🔗Click to View
  56. Jeyaprakash N, Che-Hua Yang, Muthukannan Duraiselvam, G. Prabu, “Microstructure and tribological evolution during laser alloying WC-12% Co and Cr3C2− 25% NiCr powders on nodular iron surface” Results in Physics 12 (2019) 1610-1620.🔗Click to View
  57. Anil Kumar, S. Natarajan, Muthukannan Duraiselvam, S. Ramachandra, “Synthesis, Characterization and Mechanical Behavior of Al 3003 - TiO2 Surface Composites through Friction Stir Processing” Materials and Manufacturing Processes 34,2 (2019): 183–191.🔗Click to View
  58. Sathish S, Anandakrishnan V, Dillibabu V, Muthukannan Duraiselvam, Balamuralikrishnan N, “Optimization of Coefficient of Friction for Direct Metal Laser Sintered Inconel 718”, Advances in Manufacturing Technology (2019) 371-379.🔗Click to View
  59. Anil Kumar, B.P Dinesh Babu, P Marimuthu, Muthukannan Duraiselvam, “Effect of Laser Surface Texturing on Tribological Behaviour of Grey Cast Iron” International Journal of Surface Science and Engineering 13, 2/3 (2019): 220-235.🔗Click to View
  60. Manikandan Esakkimuthu, Balakrishnapillai S. Sreeja, Sankararajan Radha, Muthukannan Duraiselvam, Abhishek Gupta, Shriganesh Prabhu, “Microfabrication of terahertz frequency- selective surface by short-and ultrashort laser ablation” Optical Engineering 58 (1) (2019) 011007.🔗Click to View
  61. Haja Maideen, Muthukannan Duraiselvam, M. Varatharajulu, “Synthesis of alloying Al 7075 with Molybdenum for Functional Characterization”, International Journal of Recent Technology and Engineering (IJRTE), Volume-8 Issue-3, (2019) 5092-5103.ISSN: 2277-3878.
  62. N. Jeyaprakash, Muthukannan Duraiselvam, S. V. Aditya,” Numerical Modeling Of WC-12% Co Laser Alloyed cast iron in high temperature sliding wear condition using Response Surface Methodology”, Surface Review and Letters 26,1 (2018) 1950009 1-19.🔗Click to View
  63. Sokkalingam, R., K. Sivaprasad, V. Muthupandi, and Muthukannan Duraiselvam. “Characterization of Laser Beam Welded Al0.5CoCrFeNi High-Entropy Alloy.” Key Engineering Materials 775 (2018): 448–453.🔗Click to View
  64. Selvan, B. M. M., Anandakrishnan, V., Muthukannan Duraiselvam, Venkatraman, R., & Sathish, S. “Multi objective optimization of wear behaviour of in situ AA8011-ZrB2 metal matrix composites by using taguchi-grey analysis.”, Materials Science Forum, (2018). 928, 162–167.🔗Click to View
  65. Parthiban K, Muthukannan Duraiselvam, R. Manivannan, “TOPSIS Based Parametric Optimization of Laser Micro-Drilling of TBC Coated Nickel Based Superalloy” Optics & Laser Technology 102 (2018): 32–39.🔗Click to View
  66. Sarath Raghavendra Babu, K. E.,Muthukannan Duraiselvam., & Manikanta Reddy, L. “Enhancing antireflection property of silicon through direct picosecond laser surface texturing.” Surface and Interface Analysis, (2018). 50(6), 616–622.🔗Click to View
  67. Jeyaprakash N, Muthukannan Duraiselvam, R. Raju, “Modelling of Cr3C2-25% NiCr Laser Alloyed Cast Iron in High Temperature Sliding Wear Condition Using Response Surface Methodology” Archives of Metallurgy and Materials, (2018), 1303–1315.🔗Click to View
  68. Dillibabu V, Muthukannan Duraiselvam, S. Natarajan, U. Chandrasekhar, Muhammed Anaz Khan, “High Temperature Tribological Characterisation of Laser Nitrided Nickel-Based Superalloy” Transactions of the Indian Institute of Metals 71, 1 (2018): 99–106.🔗Click to View
  69. Narayanan Balamurali Krishnan, Muthukannan Duraiselvam, S Natarajan, Muhammed Anaz Khan, “Laser Material Processing of Nickel Superalloy for Improved Erosion Resistance” Materials and Manufacturing Processes 32, 14 (2017): 1596–1605.🔗Click to View
  70. Dhineshkumar S. R, Muthukannan Duraiselvam, S. Natarajan, S. S. Panwar, Trilochan Jana, Muhammed Anaz Khan, “Effect of Laser Glazing on the Thermo-Mechanical Properties of Plasma- Sprayed LaTi2Al9O19 thermal Barrier Coatings” Materials and Manufacturing Processes 32, 14 (2016): 1573–1580.🔗Click to View
  71. Muhammed Anaz Khan, Muthukannan Duraiselvam, S.S. Panwar, Trilochan Jena, and S.R. Dhineshkumar. “Thermo-Mechanical Characterization of Laser Textured LaMgAl11O19/YSZ Functionally Graded Thermal Barrier Coating.” Surface and Coatings Technology 321 (2017): 146– 155.🔗Click to View
  72. V. Dillibabu,Muthukannan Duraiselvam, U. Chandrasekhar, R. Raju, “Microstructural Studies on Laser Dissimilar Welded Ni and Steel Alloys for Aeronautical Turbine Applications”, Lasers in Engineering (2016) 247-260.🔗Click to View
  73. Arulbrittoraj, A., P. Padmanabhan, and Muthukannan Duraiselvam. “Sliding Wear of AISI1040 Steel at Different Thermo Chemical Surface Treated Conditions.” International Journal of Surface Science and Engineering 11, no. 6 (2017): 531-546.🔗Click to View
  74. M. Adam Khan, S. Sundarrajan, Muthukannan Duraiselvam, S. Natarajan, A. Senthil Kumar, “Sliding Wear Behaviour of Plasma Sprayed Coatings on Nickel Based Superalloy” Surface Engineering 33, 1 (2017): 35–41.🔗Click to View
  75. Dillibabu, V., Muthukannan Duraiselvam, Muhammed Anaz Khan, and K.P. Naveena. “High- Temperature Tribological Characterisation of Laser Surface Melted Ni-Based Superalloy.” International Journal of Surface Science and Engineering 11, no. 3 (2017): 273-287.🔗Click to View
  76. Muhammed Anaz Khan, Muthukannan Duraiselvam, S. S. Panwar, Trilochan Jena,S. R. Dhineshkumar, “Improvement of strain tolerance of functionally graded TBCs through laser surface micro-texturing”, Journal of Materials Science 52, 2 (2016) 696-708.🔗Click to View
  77. Vasumathy, D., Anil Meena, and Muthukannan Duraiselvam. “Experimental Study on Evaluating the Effect of Micro Textured Tools in Turning AISI 316 Austenitic Stainless Steel.” Procedia Engineering 184 (2017): 50–57.🔗Click to View
  78. S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan, “Enhancement of strain tolerance of functionally graded LaTi2Al9O19 thermal barrier coating through ultra-short pulse-based laser texturing”, Surface & Coatings Technology 304 (2016) 263-271.🔗Click to View
  79. S.R. Dhineshkumar, Muthukannan Duraiselvam, S. Natarajan, S.S. Panwar, Trilochan Jana, Muhammed Anaz Khan, “Enhanced ablation resistance through laser glazing of plasma sprayed LaTi2Al9O19-based functionally graded thermal barrier coating”, Ceramics International 42 (2016) 10184 – 10190.🔗Click to View
  80. Arulbrittoraj A, P. Padmanabhan,Muthukannan Duraiselvam, R. Srinivasan, G. Ebenezer, “The Effect of Sliding Wear Parameters on Carburized AISI1040 Steel” Journal of Mechanical Science and Technology 30, 4 (April 2016): 1825–1833.🔗Click to View
  81. Mohammed Mohaideen Ferozhkhan, Muthukannan Duraiselvam, Kottaimathan Ganesh Kumar, Rajanbabu Ravibharath, “Plasma transferred arc welding of satellite 6 alloy on stainless steel for wear resistance”, Procedia Technology 25 (2016) 1305-1311.🔗Click to View
  82. K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, “Surface nano-texturing of silicon by picosecond laser irradiation through TiO2 nanotube arrays”, Applied Surface Science 353 (2015) 1112 – 1116.🔗Click to View
  83. M Hashim, Muthukannan Duraiselvam, “Enhancing Tribological and Corrosion Resistance of Hastelloy C-276 through Laser Surface Treatment”, Materials Science Forum 830-831 (2015) 659- 662.🔗Click to View
  84. Ramesh Raju, Muthukannan Duraiselvam, Vijay Petley, Shweta Verma, R. Rajendran, “Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition”, Materials Science and Engineering A 643 (2015) 64-71.🔗Click to View
  85. V Senthilkumar, B Thiyagarajan, Muthukannan Duraiselvam, K Karthick, “Effect of thermal cycle on Ni–Cr based nanostructured thermal spray coating in boiler tubes”, Transactions of Nonferrous Metals Society of China 25 (2015) 1533-1542.🔗Click to View
  86. D. Sudhakar, D. Jeyasimman,Muthukannan Duraiselvam, “Dry Sliding Wear Behavior of Cr3C2-NiCr Coating on Austenitic Stainless Steel”, International Journal of Core Engineering & Management 12 (2015) 215- 225.
  87. Illangovan Arun, Muthukannan Duraiselvam, V. Senthilkumar, R. Narayanasamy, V. Anandakrishnan, “Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies”, Materials and Design 63 (2014) 257–262. ISSN: 0261-3069.🔗Click to View
  88. Lenin, Singaravelu D., A. Uthirapathi, Ramana Reddy P.S. Venkata, and Muthukannan Duraiselvam. “Influence of Pulse-on-Time on the Performance of Wire Electrical Discharge Machining of Ti-6Al-4V Using Zinc Coated Brass Wire.” Applied Mechanics and Materials 592–594 (2014): 416– 420.🔗Click to View
  89. Arun, Ilangovan, Muthukannan Duraiselvam, and V. Senthilkumar. “Modelling and Analysis of Electrical Discharge Alloying through Taguchi Technique.” Applied Mechanics and Materials 592– 594 (2014): 521–524.🔗Click to View
  90. Rajesh Siriyala, A. Gopala Krishna, P. Rama Murthy Raju,Muthukannan Duraiselvam, “Multi-response optimization of tribological characteristics of aluminium MMCs using PCA”, International Journal of Multidiscipline Modeling in Material and Structures Vol.10 (2014) 276-287.🔗Click to View
  91. S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, “Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique”, Materials and Design 60 (2014) 184–192. ISSN: 0261-3069.🔗Click to View
  92. Ilangovan Arun, P. Vaishnavi, Muthukannan Duraiselvam, V. Senthilkumar, V. Anandakrishnan, “Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel and its wear resistance”, International Journal of Materials Research 105, 6 (2014) 544-551. ISSN: 1862- 5282.🔗Click to View
  93. S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, S. Raghuraman, V. M. Illayaraja Muthaiyaa, “Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075- TiC metal matrix composites”, Applied Mechanics and Materials 541-542 (2014) 258–262.🔗Click to View
  94. S. Baskaran, B. M. Muthamizh Selvan, V. Anandakrishnan, R. Venkatraman, Muthukannan Duraiselvam, “Effect of Heat Treatment on Wear Behaviour of Hot Extruded AA7075-4% TiC in-situ metal matrix composite”, Applied Mechanics and Materials 541-542 (2014) 263–267.🔗Click to View
  95. Muthukannan Duraiselvam, A. Valarmathi, S. M. Shariff, G. Padmanabham, “Laser surface nitride Ti–6Al–4V for light weight automobile disk brake rotor application”, Wear 309 1-2 (2014) 269–274. ISSN: 0043-1648.🔗Click to View
  96. S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, Muthukannan Duraiselvam, “Statistical Analysis of Dry Sliding Wear of Graphite Reinforced Aluminium MMCs”, Procedia Materials Science 6 (2014) 1110-ISSN: 2211-8128.🔗Click to View
  97. A Parthiban, R Ravikumar, H Abdul Zubar, M Duraiselvam, “Experimental investigation of CO2 laser cutting on AISI 316L sheet”, Journal of Scientific & Industrial Research 73 (2014) 387.🔗Click to View
  98. Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, “Numerical Finite Element Investigation on Laser Cladding of Aerospace Components”, International Journal of Life Cycle Reliability and Safety Engineering Vol.3 Issue 4 (2014) 13-23. ISSN: 2250-0820.🔗Click to View
  99. Baskaran, S., V. Anandakrishnan, and Muthukannan Duraiselvam. “Investigations on Dry Sliding Wear Behavior of in Situ Casted AA7075–TiC Metal Matrix Composites by Using Taguchi Technique.” Materials & Design 60 (2014): 184–192.🔗Click to View
  100. Parthasarathi, N.L., Utpal Borah, and Shaju K. Albert. “Effect of Temperature on Sliding Wear of AISI 316 L(N) Stainless Steel – Analysis of Measured Wear and Surface Roughness of Wear Tracks.” Materials & Design 51 (October 2013): 676–682.🔗Click to View
  101. M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu, V.Muthupandi, K.Sivaprasad, K.R. Rajith, “Tribological studies on laser surface melted Hastelloy C- 276”, Surface Engineering 29 (2013) 531-535.ISSN: 0267-0844.🔗Click to View
  102. M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam, Harshad Natu, “Improvement of wear resistance of Hastelloy C-276 through laser surface melting”, Materials and Design 46 (2013) 546-551. ISSN: 0261-3069.🔗Click to View
  103. S. Rajesh, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Statistical Modeling and Analysis of Dry Sliding Wear of SiC Reinforced Aluminium MMCs”, International Journal of Surface Engineering and Interdisciplinary Material Science 1 (2013) 57-90🔗Click to View
  104. N.L. Parthasarathi, Muthukannan Duraiselvam, Utpal Borah, “Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads”, Materials and Design 36 (2012) 141–151. ISSN: 026-3069.🔗Click to View
  105. G.M. Balamurugan, Muthukannan Duraiselvam, V. Anandakrishnan, “Comparison of high temperature wear behaviour of plasma sprayed WC–Co coated and hard chromium plated AISI 304 austenitic stainless steel”, Materials and Design 35 (2012) 640–646. ISSN: 0261-3069.🔗Click to View
  106. V. Dillibabu, Muthukannan Duraiselvam, Rahul V. S, “Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications”, International Journal of Life Cycle Reliability and Safety Engineering Vol.3 Issue1 (2014) 13 - 23. ISSN: 2250-0820.
  107. Duraiselvam M, “Laser surface modification of metals for liquid impingement erosion resistance”. In Laser Surface Modification of Alloys for Corrosion and Erosion Resistance Elsevier(2012) 155–176.🔗Click to View
  108. Rajesh Siriyala, Gopala Krishna Alluru, Rama Murthy Raju Penmetsa, Muthukannan Duraiselvam, “Application of grey-taguchi method for optimization of dry sliding wear properties of aluminum MMCs”, Frontiers in Mechanical Engineering 7 (2012) 279-287.🔗Click to View
  109. C. Anand Chairman, S. P. Kumaresh Babu, Muthukannan DuraiSelvam, K.R. Balasubramanian, “Investigation on two-body abrasive wear behavior of titanium carbide filled glass fabric-epoxy composites- a Box-Behnken approach”, International Journal of Engineering, Science and Technology 3 (2011) 119-129.🔗Click to View
  110. N.L. Parthasarathi, Muthukannan Duraiselvam, “High temperature tribological properties of NiCrBSiCFe plasma-sprayed coating on austenitic stainless-steel substrate", Journal of Alloys and Compounds 505 (2010) 824–831. ISSN: 0925-8388.🔗Click to View
  111. N.L. Parthasarathi, Muthukannan Duraiselvam, “Improvement of high temperature wear resistance of AISI 316 ASS through NiCrBSiCFe plasma spray coating”, Journal of Minerals and Materials Characterization and Engineering 9 (2010) 653-670.🔗Click to View
  112. Muthukannan Duraiselvam, N.L. Parthasarathi, “Dry sliding wear behavior of NiCrBSiCFe Plasma coating on austenitic stainless steel”, Journal of Manufacturing Engineering 5 (2010) 118-123.🔗Click to View
  113. Balamurugan G M, Muthukannan Duraiselvam, Subramaniam Arunachalam, “Sliding wear behaviour of AISI 304 austenitic stainless steel at elevated temperature”, Journal of Manufacturing Engineering 5 (2010) 137-142.
  114. Balamurugan G M, Muthukannan Duraiselvam, “Influence of temperature on the wear behaviour of WC-Co plasma sprayed AISI 304 austenitic stainless steel”, Computer Modelling and New Technologies 14 (2010) 30-40.🔗Click to View
  115. N.L. Parthasarathi, M. Duraiselvam, “Effect of sliding velocity and plasma spraying parameters on wear resistance of NiCrBSiCFe plasma sprayed on austenitic stainless steel at high temperature”, Computer Modelling and New Technologies 14 (2010) 17-29.🔗Click to View
  116. M. Prince, P. Gopalakrishnan, M. Duraiselvam, S. Natarajan, “Dry Sliding Wear Behavior of HVOF Sprayed Molybdenum and Nickel/Chromium Coatings”, International Journal of Applied Engineering Research 5 (2010) 75-86.
  117. M. Prince, P. Gopalakrishnan, Muthukannan Duraiselvam, S. Natarajan, “Study of Dry sliding wear of Plasma Sprayed Mo-Ni/Cr - Ti-6Al-4V Tribo Pair”, European Journal of Scientific Research 37 (2009) 41-48.
  118. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Investigation of hydro-abrasive erosion of laser alloyed nickel and titanium based intermetallic matrix composites with TiC reinforcement”, Surface Engineering 23 (2007) 425-430. ISSN: 0267- 0844.
  119. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Cavitation erosion resistance of Ti-6Al-4V laser alloyed with TiC- reinforced dual phase intermetallic matrix composites”, Materials Science and Engineering A 454- 455 (2007) 63-68. ISSN: 0921-5093🔗Click to View
  120. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Study of liquid impact erosion in B2-NiTi and Ti3Al Based intermetallic matrix composites on laser alloyed Ti-6Al-4V”, Advanced Engineering Materials 9 (2007) 171-176.🔗Click to View
  121. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Liquid impact erosion characteristics of martensitic stainless-steel laser clad with Ni-based intermetallic composites and matrix composites”, Wear 261 (2006) 1140-1149. ISSN: 0043-1648.🔗Click to View
  122. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, “Cavitation erosion resistance of AISI 420 martensitic stainless-steel laser-clad with nickel aluminide intermetallic composites and matrix composites with TiC reinforcement”, Surface and Coatings Technology 201 (2006) 1289-1295.🔗Click to View
  123. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Improvement of the cavitation erosion resistance of Ti-6Al-4V through laser alloying titanium aluminide based intermetallic matrix composites”, Lasers in Engineering 16 (2006) 423-436. ISSN: 0898-1507🔗Click to View
  124. Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, “Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance”, Journal of Laser Applications 18 (2006) 297-304.🔗Click to View
  125. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Particle-laden liquid impact erosion characteristics of laser clad Ni-based intermetallic matrix composites with TiC and WC reinforcements”, Lasers in Engineering 15 (2005) 355-373.🔗Click to View
  126. R. Narayanasamy, Muthukannan Duraiselvam, “CAD/CAM of streamlined extrusion Dies”, Journal of the Institution of Engineers Singapore 40 (2000) 35-39.