Research Laboratories

Equipment Located at Advanced Instrumentation & Measurement Laboratory

Prof. In charge : Dr. Shiraz Sohail

Sl. No Name of the Equipment Qty Salient Features Purpose
1. Source and Measurement unit (SMU) 1 source measure unit at its heart, but it can also be viewed as a separate oscilloscope and function generator. However, because the output function (generator) and input function (oscilloscope) Ability to measure source voltage or current and simultaneously measure voltage and/or current.
2. Spin coating unit   spin coating is its ability to quickly and easily produce very uniform films, ranging from a few nanometers to a few microns in thickness to create uniform thin films with nanoscale thicknesses. It is used intensively in photolithography, to deposit layers of photoresist about 1 micrometer thick
3. Dip coating unit   Dip Coating Systems are very useful instruments for Fabricating & Characterizing Self-assembled Structures & Multi-layered Thin Films to manufacture bulk products such as coated fabrics and condoms and specialised coatings for example in the biomedical field
4. Analytical balance 1 Analytical balances are highly sensitive lab instruments designed to accurately measure mass. Their readability has a range between 0.1mg - 0.01mg. Analytical balances have a draft shield or weighing chamber to prevent the very small samples from being affected by air currents A laboratory balance is used to obtain the mass of various objects. There are several varieties of balances, with various limits on their accuracy
5. Fume cupboard   fume cupboard of a box-like structure are tapered inlet, sash, baffle, working chamber and sash handle. They influence the ability of fume cupboard to contain and exhaust the hazardous chemicals designed to capture and remove air-borne hazardous substances generated during laboratory experiments
6. Analog Discovery kit 1 Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth – with the Analog Discovery BNC Adapter Board). Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth – with the Analog Discovery BNC Adapter Board) Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds
7. Magnetic stirrer 1 The top of the control panel is designed with an anti-corrosion liquid guiding groove. Even if the liquid overflows during the stirring process, it will not cause damage to the electronic components inside the agitator. It has large output torque. It is suitable for stirring low-viscosity large-capacity or high-viscosity small-capacity solutions. Mix the reactants evenly and make the temperature uniform, Heating in an airtight container, it is necessary to prevent bumping. For example, during distillation, zeolite can be added, or a magnetic stirrer
8. Ultrasonic cleaner 1 Ultrasonic cleaning works through highfrequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves, typically 40 kHz, agitate the liquid solution of water or solvent, and cause the cavitation of solution molecules. Ultrasonic cleaning can remove impurities and contaminants from the surfaces of machined components, sheet metal parts and other items assembled to make up finished automotive products
9. Tabletop LCR meter 1 Digital LCR meters measure the current (I) flowing through a device under test (DUT), the voltage (V) across the DUT, and the phase angle between the measured V and I An LCR meter is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component.
10. Hot air oven 1 Hot air ovens are electrical devices which use dry heat to sterilize. They were originally developed by Pasteur. Generally, they use a thermostat to control the temperature. Their double walled insulation keeps the heat in and conserves energy, the inner layer being a poor conductor and outer layer being metallic Hot air ovens use high temperatures over several hours to destroy microorganisms and bacterial spores. The ovens use conduction to sterilize items by heating the outside surfaces of the item, which then absorbs the heat and moves it towards the center of the item
11. Digital storage oscilloscope 2 Storage, Triggering, Measurement, Display visually as well as numerically. Storing and digitizing the input signals
12. Function generator 2 Producing sine, sawtooth, triangular, square waveform and ability to add DC offset To generate and deliver standard waveforms, typically sine or square waves.
13. Power supply 1 Short circuit protection, overload protection, overcurrent protection, overvoltage protection Convert the power delivered to its input by the sinusoidally alternating mains electricity supply into power available at its output.
14. Multimeter 1 Ability to measure voltage, current and resistance Measure two or more electrical values like voltage, current, resistance.
15. Micrometer 1 Handheld or portable, machine mounted, benchtop or floor and automatic or inline Precision measurement of a component
16. Vacuum pump 1 Vacuum pumps are simply compressors that take in gas at a pressure lower than atmospheric pressure, compress it, and discharge the gas at atmospheric pressure. Since gas at low pressures has a large volume, vaccum pumps tend to be bulky A vacuum pump's main function is to change the pressure in a contained space to create a full or partial vacuum either mechanically or chemically. Pressure will always try to equalize across connected egions as gas molecules flow from high to low to fill the entire area of that volume
17. Auto select pendulum jigsaw 1 Pendulum jigsaw capable of all DIY tasks Slow-start feature, fast cutting, scroll cutting, beveled shoe cutting, plunge cutting. All wood, metal, plastic material Pendulum Jigsaw will help to tackle everything from intricate, curved cuts to fast rip cuts in timber or steel. The pendulum action selector with 4 different settings, allows faster cutting when needed and ultimately helps to extend the blade life.
18. Drilling machine 1 The main feature of the drill machine is that the holes can be made in the workpiece with greater speed and other drilling operations can also be performed at a decent speed. drill press, also called Drilling Machine, device for producing holes in hard substances. The drill is held in a rotating spindle and is fed into the workpiece, which is usually clamped d in a vise resting on a table
19. Glass wares   Glassware is manufactured from opaque sand but is completely transparent. It is widely used in various fields like decorative, laboratories, technological usage, and household products.
20. Electronics consumables   Stability against temperature, rigid, low cost PCB repairing, PCB design, soldering.
21. Chemical consumables   Flammability, acidity, reactivity and heat of combustion. Product used in project testing and implementation.

Equipment Located at Bio Medical Engineering Laboratory

Prof. In charge : Dr. N. Sivakumaran and Dr. V. Sridevi

Sl. No Name of the Equipment Qty Salient Features Purpose
1. pH meter 1   Research
2. Pulse Oximeter, 1   Research
3. One touch-Blood Glucose monitoring system 1   Research
4. ECG and Electrode set (L&T) 1   Research
5. Audio meter 1   Research
6. Image Process CD & Manuals 1 Box   Research
7. Stethoscope (Analog & Digital) 1   Research
8. Conductivity meter 1   Research
9. Blood Pressure Monitor (digital) 1   Research
10. Personal Computers (Make: Dell) 6   Research
11. NI-ELVIS II kit make: National Instruments) 8   Research
12. Digital Multimeters (Fluke) 10   Research
13. NI-Workstation Spirometer, Vernier-ECG Sensor,QNET 1   Research
14. Digital Storage Oscilloscopes (Keysight-50MHz) 5   Research
15. Regulated Power Suply (Aplab) 2   Research

Equipment Located at Biomedical Device & Technology Development Laboratory

Prof. In charge : Dr.R. Periyasamy

Sl. No Name of the Equipment Qty Salient Features Purpose
1 Nerve Conduction Velocity Monitoring System 1
  • 2 Channel acquisition
  • 6 types of electrodes
  • User selectable scoring option
  • USB connectivity
  • Nerve Conduction Studies
  • EMG studies
  • Visual/Audio Evoke Potentials (VEP/AEP) studies
2 Digital Biothesiometer 1
  • Digital 0 to 50 Volts indicator
  • Portable Vibration sense
  • Computer Connectivity to export data
  • Vibration Perception Threshold (VPT) test
  • Used to identify Peripheral Sensory Neuropathy
3 Transcutaneous Bilirubin Meter 1
  • Noninvasive optical based Instrument
  • Handheld Battery powered device
  • Used in Dynamic Clinical Examination of Neonatal
  • Jaundice and Hyper Bilirubin test
4 Manual Monochromator 1
  • Optical Instrument with Fiberoptic mounting
  • Wavelength ranges from (200 – 800nm)
  • Optical study
  • Wavelength selection
5 Spectrophotometer 1
  • Wavelength 200nm-900nm
  • USB powered
  • Software Support
  • Optical study
  • Absorption, reflection, transmission & scattering
  • measurements.
6 2 Channel Wireless EMG device 1
  • 2 channel Wireless EMG system
  • Portable wearable device
  • Biopac Software and Analysis support
  • EMG measurement
  • Muscle activity studies
  • Gesture Analysis using Accelerometer and EMG
7 Electronic Stethoscope 1
  • 12 lung audio recordings on onboard
  • Bluetooth Connectivity
  • Software support
  • Digital recording of Lung sounds
  • Pulmonary disease study
8 Spirometer- 6300 Vitalograph 1
  • 48 selectable parameters
  • Flow Integration Sampling @100hz
  • Fleisch flow technology
  • VC, FVC and bronchodilator responsiveness testing

Equipment Located at Electronic Circuits Laboratory

Prof. In charge : Dr. A. Ramakalyan & Dr. S. Narayanan

Sl. No Name of the Equipment Qty Salient Features Purpose
1. Multi output Power supply (Aplab-17, Scientech-5) 22   UG LAB
2. Function Generators (Scientech-4,Scientific-22) 26   UG LAB
3. Digital Storage Oscilloscopes (HP, Agilent, Keysight) 18   UG LAB
4. Digital Multimeters Scientech make-5 Rish make-2 Agilent make-10 Fluke -2 Mextech-7 Meco 801-2 28   UG LAB
5. Sine Wave Generators (Scientech) 6   UG LAB
6. Analog Multimeters (Hawnchang) 10   UG LAB
7. Arbitary Waveform Generator (Agilent-1, Rigol-1) 2   UG LAB
8. IC TESTER (Kitek) 2   UG LAB
9. Personal Computers (Dell) 6   UG LAB
10. Stirred water bath (TC120) 1   UG LAB

Equipment Located at Instrumentation & Control Engineering Laboratory

Prof. In charge : Dr. A. Ramakalyan

 

Sl. No Name of the Equipment Qty Salient Features Purpose
1. Analog Multimeters (Motwane) 3 Overload protection, temperature compensated, mirrored scale, range switch, diode test, and battery test. UG/PG
2. Digital Multi-meter SCIENTIFIC-3 RISH-9 AGILENT-12 FLUKE-5 29 The instrument can perform measurements of AC/DC voltage and current, resistance, frequency, duty, capacitance, continuity, and diode test. UG/PG
3. Transformer (250 VA) Make: PROCON Control 4 It works at low efficiency at 50-70%, small size, easy in installation, having low magnetic losses & it is not always fully loaded. UG/PG
4. Earth Resistance meter (Motnane) 1 The instrument used to find the resistance of earth is known as Earth Tester or Earth Resistance Tester. UG/PG
5. Standard Resistors Oil filled osaw standard resistors (1,10,100,1000 ohms) 8 Temperature Coefficient of Resistance, Frequency Dependence, Insulation of the Wires, Protection Against Influences from the Environment, and Electrical Resistivity of the Material. UG/PG
6. Servo Controlled Voltage Stabilizer (3 PHASE 15KVA) 1 High reliability, Capability to compensate wide mains voltage variations, High precision of stabilized voltage, Stabilizing of high power services and Simple and limited maintenance. UG/PG
7. Current Measurements Probes (Metrix France) 2 Current probes measure a wide range of conductor diameters, types, and enhancing ranges. UG/PG
8. Low Frequency Function Generator (Feedback) 1 Generate different types of electrical waveforms over a wide range of frequencies. UG/PG
9. 3 ¾ Digits Digital Multimeter (MECO) 9 Accuracy: ± (0.5%rdg + 1dgt) Display: 3¾ digit Max. 3999 Counts Display Size: 17.5 mm. UG/PG
10. Digital Storage Oscilloscopes 60MHz-(Keysight-4) 200MHz-(Agilent5) 100 Mhz--(Agilent-5) 50MHz-(Scientech-6) 20 The digital oscilloscope has advanced features of storage, triggering and measurement. UG/PG
11. Multiwaveform Signal Generator (Scientific) 8 Symmetry / Duty Cycle: 15% to 85% variable and ±0.5% (typically at 1KHz). UG/PG
12. Personal Computers (Optiplex Core IT), HP-1 2 Built-in modem and multi-gigabyte magnetic storage drive. They also feature standard extension slots such as Peripheral Component Interconnect Express (PCIe). UG/PG
13. Digital Panel Meter 110 The unit has a built in 12VDC and 24VDC Auxiliary UG/PG
14. Digital True RMS Multimeter (Fluke 115) 5 1000V AC/DC,10A AC/DC (with test leads and current jacks), Resistance to 50 MΩ, capacitance to 10,000 μF, frequency to 100 kHz, and temperature from -40 ℃ to 400 ℃. UG/PG
15. Function Generators (Scientific) 5 The frequency stability is 0.1 % per hour, The maximum sine wave distortion for analog generators is about 1%, The modulations AM (Amplitude Modulation),FM (Frequency Modulation),orPM (Phase Modulation) are supported. UG/PG
16. Regulated Power Supply (Aplab) 4 Protect the power supply and its load from damage, such as output overcurrent, overtemperature, inrush current, and output overvoltage. UG/PG
17. Arbitrary Waveform Generator (LXI Complaint 20MHz 2CH) 1 14-bit, 125 M Sa/s, 16k point arbitrary waveform generator. Generate sine waves up to 50 MHz. UG/PG
18. Speed Control Motor (3Phase Induction AC Motor-1) (DC Motor-1) 2 Speed control of a 12V, Speed range: 0 to 3000 rpm (typical), Opto-interrupter based speed sensing, and 4-digit speed display in rpm. UG/PG
19. RTD 7 Material of Resistance Element (Platinum, Nickel, etc.), Temperature Coefficient, and Nominal Resistance. UG/PG
20. Thermocouple 6 Self-powered, Simple and Robust, Inexpensive, Wide Temperature Range. UG/PG
21. Strain gauge 6 Usual strain gauge UG/PG resistances range from 30 Ohms to 3 k Ohms (unstressed). Size of strain gauges is normally smaller than a postage stamp. UG/PG
22. IC Tester 1 An IC tester is normally compact, rugged and easy to use. It can automatically test variety of digital ICs of 6, 8, 10, 14, 16, 18 ,20, 24, 28, and 40 pins.  
23. Soldering and De soldering Kit 1 A soldering iron is the most commonly used tool to solder components on PCBs. UG/PG
24. Fluke Multimeter 87-V 5 20 kHz with low pass filter, 3 dB @ 1 kHz, and10 A (20 A for 30 seconds maximum). UG/PG
25. Dead Weight tester 1 Deadweight testers use calibrated weights to apply known pressures to a device under test for a simple and cost-effective solution that covers a wide range of pressure calibrations. UG/PG
26. Decade Resistance Box 10 Low cost, robustness and convenience UG/PG
27. Decade Inductance Box 10 Low cost, robustness and convenience UG/PG
28. Decade Capacitance Box 10 Low cost, robustness and convenience UG/PG

Equipment Located at Physiological Measurements & Instrumentation Laboratory

Prof. In charge : Dr. P. A. Karthick

Sl. No Name of the Equipment Qty Salient Features Purpose
1. Digital Biothesiometer 1    
2. Standard Baseline Aestheisometer 1    
3. Nerve Conduction Velocity monitoring System 1    
4. Transcutaneous Bilirubin Meter 1    
5. Manual Monochromator (200nm – 800nm) 1    
6. 2 Channel Wireless EMG machine 1    
7. Infrared Thermometer 1    
8. NI DAQ CARD 1    
9. Electronic Stethoscope 1    
10. Spirometer 1    
11. SMD Rework Station 1    
12. Automatic Blood Pressure Monitor 1    

Equipment Located at Smart Structures Laboratory

Prof. In charge : Dr. D. Ezhilarasi and Dr. A. Ramakalyan

Sl. No Name of the Equipment Qty Salient Features Purpose
1. Venti cell (make:venti cell 55) 1   UG lab
2. Piezo Activation System (Spranktronics) 1   UG lab
3. Vibration Generater Stand and Vibration Genereter (Spranktronics) 1   UG lab
4. d-Space Softaware and interfacing box (d space GmBH) 1   UG lab
5. Matlab 6.5 (licence no:247822) 1   UG lab
6. Personal Computers (hp Compac-1 Dell Optiplex-1 2   UG lab
7. Printer (HP Laserjet P2055d) 1   UG lab
8. Sound level meter and Calibrator (Extech) 1   UG lab
9. Ear muff (Peltor) 1   UG lab
10. Impact Hammer Kit (Piezotronics) 1   UG lab
11. Precision Micro Phone with Pre-amplifier units) 1   UG lab
12. Multi output Power supply (Aplab) 1   UG lab
13. Data Acquisition Cards NI DAQ-3 MCC DAQ-6 make:National Instruments) 9   UG lab
14. Piezo electric Crystals ( Sparkler) Piezo electric Bimorph Strips (Sparkler) 85 50   UG lab
15. Piezoelectric PVDF Sensors with leads Piezoelectric PVDF Sensorswithout leads PVDF Vibration Sensors with mass without leads PVDF Vibration sensor small horizontal (measurement Speclities ) 25 6 3 2   UG lab
16. Digital Storage Oscilloscopes Agilent 100MHz-1 Agilent 60MHz-2 3   UG lab
17. Function generetor (Agilent) 1   UG lab

Equipment Located at Applied Electromagnetics Lab

Prof. In charge : Dr. Geetha C

Sl. No Name of the Equipment Qty Salient Features Purpose
1 Vector Network Analyzer and Accessories
Handheld Vector Network Analyzer
RF Torque Wrench
01 Operating frequency: 300kHz to 4.5 GHz
Measurement of transmission & reflection coefficients, impedance of tag
Characterization of fabricated RFID Tag
2 RFID system
Workstation
Monitor
RFID System with accessories
M6e Reader Test Chassis unit
Antenna Unit
RF Adapters
RF Cables
01 RFID Protocol Support – EPC global Gen 2V2 (ISO 18000-63); ISO 18000-6B (optional)IP-X (optional, read-only); AEI ATA (optional, read-only)
Frequency Region – NA (902-928 MHz)
RF power output – 31.5 dBm
For passive wireless monitoring of structural, industrial and physiological parameters
3 ANSYS HFSS Software (5 licenses) - Ansys Academic Research HF Ansys (Ansoft) Designer (RF&SI)
HFSS
Slwave
Q3D Extractor optimetrics
ECAD Translators
Mcad Translators
Simulation of UHF RFID tag antenna sensors