Research and Academic Guidance
Ph. D Supervised
| S.No. | Name of Scholar | Thesis Title | Year of Completion |
|---|---|---|---|
| 19 | B. Jagdeesh | Deformation Studies on Novel Lattice Structures Produced by Selective Laser Melting of Metallic Bio-Materials | 2024 |
| 18 | Vishal U. Bagade | Laser Surface Texturing for Improved Adhesive and Tribological Properties of Thermal Spray Coated Ti-6Al-4V for Aero Engine Application | 2022 |
| 17 | G. V. Krishna Pradeep | Tribological Characterization of Laser Re-Melted γ-TiAl Processed by Electron Beam Additive Manufacturing | 2022 |
| 16 | G. Prabu | Studies on Tribological Behavior of Ti-6Al-4V Surface Modified with AlCrCoCuFeNi High Entropy Alloy | 2021 |
| 15 | S. Ramkumar | Laser Surface Modification of CFRP Composite to Enhance Adhesive Bond Strength | 2020 |
| 14 | A. Haja Maideen | Electrical Discharge Surface Alloying of Aluminium 7075 with Nickel and Molybdenum Powder | 2020 |
| 13 | N. Balamurali Krishnan | Laser Surface Treatment of Nickel-Based Superalloy for Enhancing Erosion Resistance of Aero Gas Turbines | 2019 |
| 12 | F. Peter Prakash | Mechanical and Tribological Studies on Laser Surface Textured Nickel-Based Superalloy | 2019 |
| 11 | K. Parthiban | Parametric Optimization of Laser Micro-Drilling of TBC Coated Nickel-Based Superalloy | 2019 |
| 10 | K. E. Sarath Raghavendra Babu | Experimental Investigations on Micro/Nano Laser Patterning for Anti-Reflectance of Silicon | 2018 |
| 09 | N. Jeya Prakash | Tribological Studies on Laser Surface Modified Nodular Cast Iron | 2018 |
| 08 | V. Dillibabu | Weldability and Tribological Studies on Nickel-Based Super Alloy for Aero Engine Applications | 2017 |
| 07 | S. R. Dhinesh Kumar | Laser Surface Modification of Functionally Graded Thermal Barrier Coatings for Aero-Engine Applications | 2017 |
| 06 | Muhammed Anaz Khan | Thermo-Mechanical Characterisation of Laser Treated Functionally Graded Thermal Barrier Coatings | 2017 |
| 05 | R. Ramesh | Mechanical and Microstructural Studies on Laser Metal Deposited Nickel and Titanium Based Aero-Engine Blades | 2016 |
| 04 | I. Arun | Experimental Investigations on the Wear Resistance of Electrical Discharge Alloyed Metal Matrix Composites | 2015 |
| 03 | M. Hashim | Experimental Investigation on the Tribological Properties of Laser Surface Treated Hastelloy C-276 | 2013 |
| 02 | G. M. Balamurugan | Comparative Wear Studies on WC-Co Plasma Sprayed and Chrome Plated AISI 304 Austenitic Stainless Steel at Elevated Temperature | 2012 |
| 01 | N. L. Parthasarathi | High Temperature Tribological Studies of NiCrBSiCFe Plasma Sprayed AISI 316 Austenitic Stainless Steel | 2011 |
PG Projects Guided
| S.No. | Name | Project Title | Year of Completion |
|---|---|---|---|
| 56 | Adheena P. A | Optimization of Laser Shock Peening Parameters Using Machine Learning | 2026 |
| 55 | Nethaji M | Experimental Investigation of Optically Tuned Absorption Effects in Laser Shock Peening of Ti-6Al-4V | 2026 |
| 54 | Pudi Jaswanth | Experimental and Machine Learning Investigation of Superposition Effects in LSP Ti-6Al-4V | 2026 |
| 53 | S. Vigneshwar |
1.Study on Flexible Bio-Implants Using Hybrid Auxetic Structure 2.Design and Analysis of Awning Structures in Operated Cabinet in Locomotives |
2025 |
| 52 | Vatsal Javiya Babhubai |
1.Optimizing the Process Parameters of Laser Shock Peening Process for Improved Mechanical Properties Using Machine Learning Algorithm 2.Optimization of Laying Strategies for Improved Tensile Strength in Additive Manufacturing |
2025 |
| 51 | Suroj Singh |
1. Fabrication and Analysis of 3D Printed Shape Memory Polymer 2. Investigation of Shape Memory Polymer for Manufacturing Application |
2024 |
| 50 | Ashish Kumar Chaurasia |
1.Additive Manufacturing of Lattice Structure-Based Turbine Blade with Selective Laser Melting 2.Design and 3D Printing of Microfluidic Channel Fabricated Through Laser Micromachining for WMAT |
2024 |
| 49 | Arijit Bera | Design and Fabrication of Lightweight FESS Components for Energy Storage Application | 2023 |
| 48 | Astha Arya | Flow Analysis of Converging Microfluidic Channel Fabricated on Inconel 718 Alloy | 2023 |
| 47 | Rahul Mahto | Characterization of Laser Shock Peened Ti-6Al-4V with and without Ablative Coating | 2022 |
| 46 | Kumaresh | Numerical Characterization of Femtosecond Laser Ablation of Aluminium and Ti-6Al-4V to Study the Topology of Ablation Crater | 2021 |
| 45 | E. V. Abhinav | An Investigation on Resistance Spot Welding of Ti-6Al-4V Sheets Using Taguchi's Design of Experiment | 2020 |
| 44 | Mathew John | Investigation on the Performance of a Laser Surface Textured Ti-6Al-4V Electrode in a Microbial Fuel Cell | 2020 |
| 43 | Survase Akshay Shivaji | Improvement of Adhesion Bond Strength of Thermal Plasma Spray Coated Material | 2020 |
| 42 | E. V. Abhinav | An Investigation on TIG Welding of Ti-6Al-4V Sheets Using Taguchi's Design of Experiment | 2019 |
| 41 | Mathew John | Influence of Laser Surface Texturing on the Tribological Performance of CuNiIn Coated Ti-6Al-4V | 2019 |
| 40 | Survase Akshay Shivaji | Thermal Plasma Spray Coating of Nickel Aluminium Powder on Inconel 718 Alloy | 2019 |
| 39 | Vysakh Mohan | Optimising the Parameters for Laser-Based Micro Processing on Reflective Materials | 2019 |
| 38 | Mudit Singh | Optimization of Parameters of Laser Drilling on Inconel 718 Material Using Taguchi-ANOVA Method | 2019 |
| 37 | Antony George | Laser Processing of Magnesium for Biomedical Applications | 2019 |
| 36 | Vysakh Mohan | Enhancing the Properties of Glass Fibre Reinforced Composite Joint with Metal Sheet Using Laser-Based Surface Patterning | 2018 |
| 35 | Mudit Singh | Effect of Variation of Laser Drilling Parameters on Drilling of Inconel 718 Material | 2018 |
| 34 | Antony George | Tribological Study of the Surface Characteristics of Laser Surface Textured Grade 5 Titanium | 2018 |
| 33 | G. Prabu | Modification of Wetting Property of Nickel-Based Super Alloy Surface by Picosecond Laser Texturing | 2017 |
| 32 | Chebrolu Kalyan | A Study on Wear Characteristics of a Nickel-Based Super Alloy (BZ112Y) Surface Textured with Pico Second Laser | 2017 |
| 31 | Hrishikesh KP | Defining Instruction for Continued Airworthiness of a Jet Engine | 2017 |
| 30 | Aditya S. V. | Enhancement of Adhesion Strength of Thermal Barrier Coating Through Laser Surface Texturing of Aero-Turbine Materials | 2017 |
| 29 | Naveena K. P. | Impact of Fuel on Gas Turbine Combustor Component Durability | 2016 |
| 28 | Pranay Vihal Kamble | Identification and Elimination of Wastes From Cable Cutting for Improved Productivity Using Value Stream Mapping | 2016 |
| 27 | Chebrolu Kalyan | Fabrication of Titanium Oxide Nanotube Arrays for Laser Surface Nano Texturing | 2016 |
| 26 | Hrishikesh KP | Modelling and Synthesis of Engine Overhaul Data to Infer on Operational Cost | 2016 |
| 25 | G. Prabu | Effect of CNT Based Laser Alloying on Wear Behavior of Ductile Iron | 2016 |
| 24 | Deep Chakravorty | Study of Tribological Properties of Laser Treated Nodular Cast Iron | 2016 |
| 23 | M. Ferozh Khan | Characterization of SMA, GTA & PTA Welding for Hard Facing of Stellite 6 on Austenitic Stainless Steel | 2016 |
| 22 | Deep Chakravorty | Laser Surface Modification of Nodular Cast Iron for Improved Tribological Performance | 2015 |
| 21 | Pranay Vihal Kamble | Laser-Based Surface Polishing of Ti and Ni Based Alloys | 2015 |
| 20 | Lankireddy Manikanta Reddy | Laser Surface Texturing on Steel to Improve Hydrophobic Effect | 2015 |
| 19 | S. Ravi Kiran | Preparation of Coating for Ti-6Al-4V for the Use in Biomedical Applications Using Anodization | 2015 |
| 18 | Mohit Singhal | Taguchi Optimization of AISI D-2 Die Steel Using Graphite Based Electrical Discharge Coating | 2014 |
| 17 | Lankireddy Manikanta Reddy | Laser Surface Texturing on Silicon Wafer | 2014 |
| 16 | Mohit Singhal | Taguchi Optimization of AISI D-2 Die Steel Using Molybdenum Based Electrical Discharge Coating | 2013 |
| 15 | Arun G. K. | Numerical Finite Element Investigation on Laser Cladding of Aerospace Components | 2013 |
| 14 | Rahul V. S. | Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications | 2013 |
| 13 | Vinneth Murali | Numerical Simulation and Experimental Investigation of Dissimilar Welded Joints | 2013 |
| 12 | Rajith K. R. | Erosive-Corrosion Behaviour of Laser Surface Treated Hastelloy C-276 | 2013 |
| 11 | G. Nila | Optimizing Delivery Lead Time in the Subcontracting of Boiler Components | 2012 |
| 10 | K. E. Sarath Raghavendra Babu | Comparative Study of Tribological Behaviour of Laser Surface Treated Hastelloy C276 in Nitrogen and Argon Atmosphere | 2012 |
| 09 | D. Sudhakar | Tribological Behaviour of D-Gun Sprayed Al₂O₃-TiO₂ Coating | 2012 |
| 08 | Rajith K. R. | Experimental Analysis and Simulation Studies of Laser Surface Treated Hastelloy C-276 | 2012 |
| 07 | D. Sudhakar | Tribological Behaviour of D-Gun Sprayed Cr₃C₂-NiCr Coating | 2012 |
| 06 | K. E. Sarath Raghavendra Babu | Laser Surface Nitriding of Hastelloy C276 | 2011 |
| 05 | M. Jeyashree | Dry Sliding Wear Characteristics of Aluminium Composites | 2011 |
| 04 | Raayya Peche | Dry Sliding Wear Behaviour of Nickel-Chromium Electroplated Low Carbon Steel (AISI 1020) at Elevated Temperatures | 2010 |
| 03 | M. Jeyashree | Sliding Wear Characteristics of Nano Al₂O₃ Dispersed Grey Cast Iron Composite | 2010 |
| 02 | Salunke Balaji Mohan | Improved Tribological Properties of Ti-6Al-4V Alloy by Laser Surface Melting | 2010 |
| 01 | K. S. R. Krishna | Tribological Study of Chrome Coated AISI 304 Austenitic Stainless Steel | 2010 |
UG Projects Guided
| S.No. | Name | Project Title | Year of Completion |
|---|---|---|---|
| 18 | Gauvrav Yadav, Keshav Kabra, Shrihari S | Optimization of Raw Material Handling Systems (RMHS) in Integrated Iron & Steel Plants in India | 2025 |
| 17 | Shresth Bhakta, Chirag Bhatia, Siddesh Gaikwad | Fibre Extrusion Defect in Anisoprinter Using Machine Learning | 2024 |
| 16 | Ravichandran G. S. | Design and Analysis of Aero Turbine Blade | 2024 |
| 15 | A. Smrithi, Girish Kaushik K., Priyadharsni | Design and Simulation of Microchannels | 2022 |
| 14 | Jayendran R., Karthik K. Kumaresan, Muthu Narayanan | Convertible Wheelchair with Assist-Free Bed Transfer | 2022 |
| 13 | Pragya Rai, Anju Rachel Mathew | Improving Supply Chain by Predicting Demand Forecast for New Products Using Sentiment Analysis and Neural Network Approach | 2020 |
| 12 | Rapaka Chandra Sathwick, Abhiram Kulkarni | Laser-Based Direct Metal Deposition of Nickel Super Alloys | 2018 |
| 11 | Kalavala Mourya Varshith, Vwmula Anurag | Laser Surface Texturing of Hastelloy C276 to Improve Its Hydrophobicity | 2017 |
| 10 | K. Kulbhushan, K. Vamshi | Analysis of Thermoelectric Generator with Variation in Temperature | 2017 |
| 09 | Sumit Shekhar, Ridesh Jaganathamani | Comparative Finite Element Analysis of Plasma Spray Coating on Laser Textured and Non-Textured Substrate | 2016 |
| 08 | V. Vishal | Simultaneous Poisson-Schrödinger Solver for MOSFET | 2016 |
| 07 | A. M. Anirudh, Potluri Venkata Vamshi Krishna, S. Chandra Vinoth | Experimental Investigation and Optimization of Process Parameters for Laser Dissimilar Welding Process | 2014 |
| 06 | T. S. Sai Balagi, Ranajyoti Dutta, Nikhil Hans | Mathematical Modelling of Laser Surface Cladding and Optimization of Process Parameters Using Geometric Programming | 2014 |
| 05 | K. Siva Deepak, O. V. M. Surya Kaundinya | Finite Element Analysis of Laser Dissimilar Welding | 2013 |
| 04 | K. Rajash, J. Jai Santhosh | Mechanical Anti-Lock Braking System | 2012 |
| 03 | C. Dinesh Kumar, S. R. Balaji | Performance Optimization of Hole-Drilling in Electrical Discharge Machining | 2012 |
| 02 | Praveen Dusi, Amit Kumar | Optimization of the Process Variables for Wear Analysis of NiCrBSiC Plasma Sprayed Stainless Steel | 2011 |
| 01 | Navjot Singh, Ashwin Ganesh | Study of Lean Manufacturing Techniques and Its Implementation in Indian Industries | 2010 |